Manual.ly Logo

Omnitronic WC-3 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: QW-35-FL
page

/ 12

Loading...
a06fcf45a57886459c62326ec38e5a69a35e page a
10
Electrical Connection
Cabling a PA system is an electric installation which must only be carried out by a qualified electrician!
Always insulate the connection cables which are not used. Pay attention to the correct power matching.
Overload will result in damage of the PA amplifier and of the speaker:
Step 1: If the PA system is turned on, turn it off before making any connection.
Step 2: Connect the speaker to the amplifier: Connect the negative pole and the positive pole to the
100 V output of the amplifier.
Step 3: When connecting several speakers, make sure that all speakers have the same polarity and that
the amplifier is not overloaded.
Step 4: Adjust the desired volume level with the rotary switch.
Notes Regarding Operation
During operation, please make sure the speaker always sounds well. When distortions can be heard, either
the amplifier or the speaker is overloaded. Overloads can quickly lead to amplifier or speaker damage. In
order to avoid damage, please reduce the volume immediately when distortions can be heard. When
speakers are destroyed by overload, the guarantee becomes void. Always check the sound pressure level
with a meter in order to keep to the threshold.
..............................................................................................................................................................................
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test. The operator has to make sure that safety-
relating and machine-technical installations are inspected by a skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the speaker systems or parts of the speaker system have to be tightly
connected and must not be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the speaker system. Please use a soft lint-free and moistened cloth.
Never use alcohol or solvents!
There are no serviceable parts inside the speaker system. Maintenance and service operations are only to
be carried out by authorized dealers.
If the speaker system distorts, one of the loudspeakers may be defective. Test the speaker system once
more with another amplifier. If the sound remains distorted, the speaker system should not be operated any
more in order to prevent further damage. Please contact your dealer.
If clacking sounds are heard from the speaker system, screws may have loosened due to the continuous
vibrations. The speaker system should be checked by a specialist. Especially for public use, the speaker
system should be checked before every operation so that the speaker system and the speakers in the
systems are always well fixed.
Should you need any spare parts, please use genuine parts. Should you have further questions, please
contact your dealer.
DANGER TO LIFE!
High voltage at terminals. Installation by skilled personnel only.
Turn off PA system before connecting.

Chat with your Omnitronic WC-3 manual using AI

Get instant AI answers from your Omnitronic WC-3 manual

Ask anything about the Omnitronic WC-3. Answers come from this manual, with the pages they are based on.

WC-3 Maintenance Schedule

Remind me when maintenance is due
Yearly
Annual safety inspection by skilled person

Have a skilled person inspect safety installations annually, checking for loose screws, deformations, and cable damage.

Show in the manual (page 10)
Every 4 years
Expert acceptance test inspection

Have an expert inspect safety-relating and machine-technical installations every four years as part of an acceptance test.

Show in the manual (page 10)
Frequently
Clean the speaker housing

Regularly remove dust and dirt using a soft, lint-free, moistened cloth. Never use alcohol or solvents.

Show in the manual (page 10)
Before every operation
Check mounting security

For public or commercial use, verify that the speaker is securely fixed before each operation to prevent falling.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WC-3?

Yes No

Frequently Asked Questions

A

The Omnitronic WC-3 requires a fixed wall-mounted installation suitable for ELA systems. It is not wireless and needs to be securely attached to a surface that can support five times its weight. Indoor use is mandatory.

Is this answer helpful?

A

The speaker has a rated power of 10 Watts RMS. It operates on a 100-Volt input voltage and has a sensitivity of 91 dB at 1 Watt and 1 meter distance.

Is this answer helpful?

A

Use a soft and damp cloth for cleaning. Never use solvents, alcohol, or sharp cleaning materials as they can damage the ABS plastic housing and finish.

Is this answer helpful?

A

Yes, provided it is installed correctly in public zones. Safety inspections are required, and mounting must be secure to prevent falling hazards. Only trained personnel should operate it.

Is this answer helpful?

A

The frequency range spans from 150 Hz to 15 kHz, covering the essential human hearing spectrum for speech and general music amplification needs.

Is this answer helpful?

A

No. Unauthorized modifications void the warranty. Safety inspections and maintenance must be performed by authorized dealers or qualified experts.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust ABS housing resists scratches and impacts effectively
  • 100-Volt technology allows centralized amplifier connections
  • Built-in level control simplifies volume adjustments during setup
VS

Disadvantages

  • Designed for indoor use only, not suitable for weather exposure
  • Requires professional installation to ensure structural stability
  • Overloading the system voids the warranty and damages components
M: QW-35-FL

Product Specification

Principle

1-way

Woofer

1x 5.5"

Amplification

Passive

Frequency Range

150Hz-15kHz

Power Handling

10W RMS

Sensitivity

91dB

Dimensions

7.87x10.83x4.13 in (WxHxD)

Weight

2.95 lbs

M: QW-35-FL

Product Description

Omnitronic WC-3: The Reliable Choice for Indoor Sound Systems

When setting up professional audio environments indoors, selecting the right loudspeaker is crucial for achieving clear and balanced sound coverage. Sound quality is paramount in modern facilities. The Omnitronic WC-3 stands out as a robust wall-mounted solution designed specifically for ELA systems using efficient 100-Volt technology. This device brings clarity and power to classrooms, offices, hospitals, and retail shops without cluttering the limited space with bulky speaker equipment. It is engineered for fixed installation to ensure consistent audio performance during long operating hours.

Advanced Design and Build Quality

The housing is crafted from high-quality ABS plastic, ensuring it remains scratch-resistant and impact-resistant over time. This durability makes it ideal for high-traffic areas where physical contact might occur unexpectedly. The angled cabinet form provides an optimal radiation angle, directing sound precisely where it is needed without bouncing off walls excessively. Inside, a broadband speaker paired with a tweeter dome ensures full-range audio reproduction spanning from 150 Hz to 15 kHz. Despite its slim profile, it delivers a satisfying 10 Watts of RMS power while maintaining high sensitivity levels. A built-in level control allows for easy adjustment during setup to match the specific needs of the room layout.

Installation and Safety Protocols

Proper installation is non-negotiable for safety and legal compliance regarding equipment safety. This unit must be securely fastened to a wall capable of handling five times its actual weight to prevent accidents. Hanging speakers carry significant risks, so professional structural installers are recommended for overhead placements especially in public zones. This prevents injury and property damage significantly. Electrical connections should only be handled by qualified personnel to avoid electrical shocks or fire hazards from improper wiring. Always ensure the amplifier matches the speaker load to prevent distortion or permanent damage to components.

Maintenance and Longevity Practices

Keeping the Omnitronic WC-3 in top condition requires simple but consistent care routines. Monitor sound levels to avoid hearing damage. Regularly check that mounting screws are tight and that cables show no signs of wear or material fatigue. Cleaning should always be done with a soft, damp cloth, never using solvents that could harm the ABS finish or damage the casing. If audible distortion occurs, check the volume levels immediately to prevent overheating. Overloading the system voids the warranty and reduces lifespan. Whether you are building a new sound system or upgrading an old one, following the Omnitronic WC-3 Piece Manual ensures you utilize this hardware effectively. By following strict safety guidelines and installation steps, you secure a long-lasting audio experience that serves your venue well for years without unexpected failures or hazards. Always verify environmental conditions like temperature and humidity to ensure optimal operation within the specified range of minus 5 to plus 45 degrees Celsius.

M: QW-35-FL

© Copyright 2026 Manual.ly