Manual.ly Logo

Omnitronic WC-2 Manual

0.0 · 0 Ratings

PDF manual · 13 Pages

English

M: QW-35-FL
page

/ 13

Loading...
0dc7430f0f2dc0e85fb311a809f671eaa8d0 page 7
00036213.DOC, Version 1.0
7/13
5. BEDIENUNG
Schalten Sie den Verstärker ein. Stellen Sie die gewünschte Lautstärke am Lautstärkeregler ein.
Achten Sie darauf, dass das Ausgangssignal nicht verzerrt, Ihre Lautsprecher können dadurch beschädigt
werden.
Bitte achten Sie während des Betriebes darauf, dass der Lautsprecher stets angenehm klingt. Werden
Verzerrungen hörbar, dann ist davon auszugehen, dass entweder der Verstärker oder der Lautsprecher
überlastet ist. Dies kann schnell zu Schäden an dem Verstärker und/oder am Lautsprecher führen.
Regeln Sie daher bei hörbaren Verzerrungen die Lautstärke entsprechend herunter, um Schäden zu
vermeiden. Durch Überlast zerstörte Lautsprecher sind von der Garantie ausgeschlossen.
Kontrollieren Sie regelmäßig mit einem Schallpegelmesser, ob Sie den geforderten Grenzwert einhalten.
6. REINIGUNG UND WARTUNG
Der Unternehmer hat dafür zu sorgen, dass sicherheitstechnische und maschinentechnische Einrichtungen
mindestens alle vier Jahre durch einen Sachverständigen im Umfang der Abnahmeprüfung geprüft werden.
Der Unternehmer hat dafür zu sorgen, dass sicherheitstechnische und maschinentechnische Einrichtungen
mindestens einmal jährlich durch einen Sachkundigen geprüft werden.
Dabei muss unter anderem auf folgende Punkte besonders geachtet werden:
1) Alle Schrauben, mit denen die Box oder Gehäuseteile montiert sind, müssen fest sitzen und dürfen nicht
korrodiert sein.
2) An Gehäuse, Befestigungen und Montageort (Decke, Abhängung, Traverse) dürfen keine Verformungen
sichtbar sein.
3) Die elektrischen Anschlussleitungen dürfen keinerlei Beschädigungen, Materialalterung (z.B. poröse
Leitungen) oder Ablagerungen aufweisen. Weitere, auf den jeweiligen Einsatzort und die Nutzung
abgestimmte Vorschriften werden vom sachkundigen Installateur beachtet und Sicherheitsmängel
behoben.
Die Lautsprecherbox sollte regelmäßig von Verunreinigungen wie Staub usw. gereinigt werden. Verwenden
Sie zur Reinigung ein fusselfreies, angefeuchtetes Tuch. Auf keinen Fall Alkohol oder irgendwelche
Lösungsmittel zur Reinigung verwenden!
Im Gehäuseinneren befinden sich keine zu wartenden Teile. Wartungs- und Servicearbeiten sind
ausschließlich dem autorisierten Fachhandel vorbehalten!
Klingt die Lautsprecherbox verzerrt ist eventuell einer der Lautsprecher defekt. In diesem Fall die Laut-
sprecherbox ggf. nochmals an einem anderen Verstärker testen. Ist der Klang danach immer noch verzerrt
sollte die Lautsprecherbox nicht mehr weiter betrieben werden, um weitere Schäden an der Box zu
vermeiden. Setzen Sie sich in diesem Fall bitte mit einer Fachwerkstatt in Verbindung.
Wenn an der Lautsprecherbox klappernde Geräusch hörbar sind könnte es sein, dass sich Schrauben durch
die ständigen oder übermäßigen Vibrationen gelöst haben. In diesem Fall sollte die Lautsprecherbox von
einem Fachmann überprüft werden. Außerdem muss speziell im gewerblichen Bereich vor jedem Einsatz der
Lautsprecherbox geprüft werden, ob die Lautsprecherbox und die Lautsprecher in der Lautsprecherbox noch
sicher befestigt sind.
Sollten einmal Ersatzteile benötigt werden, verwenden Sie bitte nur Originalersatzteile.
Sollten Sie noch weitere Fragen haben, steht Ihnen Ihr Fachhändler jederzeit gerne zur Verfügung.

Chat with your Omnitronic WC-2 manual using AI

Get instant AI answers from your Omnitronic WC-2 manual

Ask anything about the Omnitronic WC-2. Answers come from this manual, with the pages they are based on.

WC-2 Maintenance Schedule

Remind me when maintenance is due
Yearly
Inspect safety installations by a skilled person

The operator must ensure safety-relating and machine-technical installations are inspected by a skilled person once a year.

Every 4 years
Inspect safety installations by an expert

The operator must ensure safety-relating and machine-technical installations are inspected by an expert every four years as part of an acceptance test.

Frequent / Regular
Clean the speaker system

Regularly clean the speaker from dust using a soft, lint-free, moistened cloth. Never use alcohol or solvents.

Before every operation
Check mounting security in public areas

In commercial or public areas, check before every operation that the speaker box and internal speakers are still securely fastened.

Regular intervals
Apply fire retardant if required

If B1 fire protection is required at the installation site, treat the surface with an appropriate fire retardant in regular intervals.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WC-2?

Yes No

Frequently Asked Questions

A

It is a 100 Volt system designed for application in ELA and PA systems, specifically for permanent indoor installations.

Is this answer helpful?

A

The speaker can be connected to terminals providing 3 W RMS using the white terminal or 6 W RMS using the red terminal.

Is this answer helpful?

A

Use a soft lint-free cloth that has been dampened with water. Do not use alcohol or solvents as they damage the casing.

Is this answer helpful?

A

No, this product is designed for indoor use only and should not be exposed to rain splash water or high humidity.

Is this answer helpful?

A

Installation and electrical connections should be performed by qualified professionals or electricians due to safety risks.

Is this answer helpful?

A

The maximum sound pressure level reaches 98 dB at a one meter distance with the appropriate amplifier settings.

Is this answer helpful?

A

Safety inspections are required annually by skilled persons and every four years by an expert in accordance with regulations.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • 100 Volt system ideal for fixed public address installations indoors.
  • Variable power output allows selection of 3W or 6W settings easily.
  • Clear frequency range spanning 130 Hz to 15 kHz for audio.
  • Compact design measuring 312 x 210 x 85 mm fits spaces well.
  • High sensitivity of 91 dB ensures efficient amplifier utilization.
VS

Disadvantages

  • Rated for indoor use only and must be kept from moisture.
  • Installation requires professional knowledge especially for overhead mounting.
  • No serviceable parts inside meaning unauthorized repairs are void warranty.
  • Mounting surface must support five times the unit weight for safety.
  • Regular inspections by experts required annually and every four years.
M: QW-35-FL

Product Specification

Principle

1-Way

Woofer

1x 5.50"

Amplifier Type

Passive

Frequency Range

130Hz-15kHz

Power Handling

6W RMS

Impedance

8 Ohms

Sensitivity

91dB

SPL Max.

98dB

Dimensions

8.27x12.28x3.35 in (WxHxD)

Weight

2.73 lbs

M: QW-35-FL

Product Description

Discover Omnitronic WC-2 Piece Manual

Discover the superior sound quality associated with the Omnitronic WC-2 Piece Manual for your professional audio needs. This high-performance device is designed specifically for fixed installations in public address systems in commercial environments. It operates on a standard 100 Volt system and is ideal for indoor environments where reliable audio distribution is required by users. Users seeking professional audio solutions will appreciate its robust build quality and flexible power options that adapt to different room sizes effectively. Installation requires careful planning to ensure maximum safety and performance standards are met during setup phases. The unit mounts securely to walls using specific drilling patterns designed for maximum stability and security. A professional approach ensures compliance with all relevant electrical standards and safety regulations over life of the unit.

Important Features and System Specifications

The speaker delivers variable power ranging from 3 to 6 Watts depending on which terminal selection the user chooses during wiring. It features a 5.5 inch driver unit capable of producing clear frequencies between 130 Hz and 15 kHz for audio. Sound pressure levels can reach up to 98 dB at one meter distance. This makes it suitable for various commercial settings where voice clarity is paramount for announcements. The sensitivity rating of 91 dB ensures efficient use of amplifier power without unnecessary loss during transmission. Measuring 312 by 210 by 85 mm, the footprint fits discreetly in most office or retail spaces without blocking views.

Installation and Safety Protocols

Secure installation is critical to prevent accidents or structural failure of the mounting system. The mounting wall surface must support the speaker weight plus five times that weight to hold securely under all conditions. Overhead mounting requires extensive experience and expert calculations of load limits. Always turn off main power before making any electrical connections to avoid injury risk from high voltage. The equipment requires 50 cm clearance around the casing for proper ventilation and heat dissipation. Keep away from rain or moisture to prevent electrical hazards.

Maintenance Guidelines and Operational Care

Regular inspection ensures longevity and safe operation of your equipment over time. Cleaning should be done with a soft damp cloth only to avoid damage to the surface finish. Avoid solvents or alcohol which can degrade the plastic casing and compromise safety. Mechanical inspections are required annually by skilled persons and every four years by certified experts. This guarantees the device remains safe for operation over many years of continuous use without unexpected failure. Contact an authorized dealer for service if issues occur. Do not attempt to open the housing yourself as there are no serviceable internal parts. Follow guidelines for humidity between -5 C and 45 C. Do not exceed ambient temperatures for reliability.

M: QW-35-FL

© Copyright 2026 Manual.ly