Manual.ly Logo

Omnitronic WC-1 Manual

0.0 · 0 Ratings

PDF manual · 13 Pages

English

M: QW-35-FL
page

/ 13

Loading...
9aaee7febfdad03b133b80371a05bb1a79ae page d
00036231.DOC, Version 1.0
13/13
6. CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the speaker systems or parts of the speaker system have to be tightly
connected and must not be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the speaker system. Please use a soft lint-free and moistened cloth.
Never use alcohol or solvents!
There are no serviceable parts inside the speaker system. Maintenance and service operations are only to
be carried out by authorized dealers.
If the speaker system distorts, one of the loudspeakers may be defective. Test the speaker system once
more with another amplifier. If the sound remains distorted, the speaker system should not be operated any
more in order to prevent further damage. Please contact your dealer.
If clacking sounds are heard from the speaker system, screws may have loosened due to the continuous
vibrations. The speaker system should be checked by a specialist. Especially for public use, the speaker
system should be checked before every operation so that the speaker system and the speakers in the
systems are always well fixed.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
7. TECHNICAL SPECIFICATIONS
Input voltage: 100 V
Speaker: 6.5''
Rated power: 5 W RMS (white)
10 W RMS (red)
COM (black)
Sensitivity (1 W/ 1 m): 92 dB, ±3 dB
Max. SPL: 98 dB
Frequency range: 150 Hz - 15 kHz
Dimensions (H x W x D): 350 x 240 x 100 mm
Weight: 1.7 kg
Please note: Every information is subject to change without prior notice. 16.04.2008 ©

Chat with your Omnitronic WC-1 manual using AI

Get instant AI answers from your Omnitronic WC-1 manual

Ask anything about the Omnitronic WC-1. Answers come from this manual, with the pages they are based on.

WC-1 Maintenance Schedule

Remind me when maintenance is due
Yearly
Inspect safety and technical installations

Have a skilled person inspect safety-relating and machine-technical installations once a year.

Show in the manual (page 13)
Every 4 Years
Expert acceptance test inspection

Have an expert inspect safety-relating and machine-technical installations every four years as part of an acceptance test.

Show in the manual (page 13)
Frequent
Clean the speaker housing

Regularly clean the speaker with a soft, lint-free, moistened cloth. Do not use alcohol or solvents.

Show in the manual (page 13)
Before each use
Check mounting security for public use

In public areas, check before every operation that the speaker system and internal speakers are securely fixed.

Show in the manual (page 13)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WC-1?

Yes No

Frequently Asked Questions

A

No, the Omnitronic WC-1 is designed strictly for indoor use. It is not resistant to rain, moisture, or fog exposure. Using it outdoors may damage the unit and void your warranty.

Is this answer helpful?

A

You can adjust the power between 5 watts and 10 watts using the rear terminals. Connect the white terminal for 5 watts or the red terminal for 10 watts to the 100 volt COM terminal.

Is this answer helpful?

A

The frequency range is listed as 150 hertz to 15000 hertz. This covers most vocal and instrumental frequencies needed for background music and announcements in typical indoor environments.

Is this answer helpful?

A

Safety-related and machine-technical installations should be inspected by a skilled person once a year. Major acceptance tests are recommended every four years by an expert.

Is this answer helpful?

A

No, you must never use solvents or aggressive detergents on the speaker casing. Use a soft cloth that is slightly dampened with water to clean dust and grime gently.

Is this answer helpful?

A

If the power is exceeded and distortion becomes audible, the speaker or amplifier may be overloaded. This can lead to permanent damage, and the warranty becomes void if the speaker is destroyed by overload.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Selectable 5W or 10W RMS power via colored terminals
  • High sensitivity rating of 92 dB for clear audio
  • Suitable for standard 100V ELA public address systems
  • Compact dimensions allow versatile indoor wall mounting
VS

Disadvantages

  • Limited to indoor use only with temperature constraints
  • Overhead installation requires professional expertise and calculation
  • High voltage wiring mandates qualified electrician involvement
  • No serviceable internal parts require professional dealer service
M: QW-35-FL

Product Specification

Principle

1-Way

Woofer

1x 6.50"

Amplification

Passive

Frequency Range

150Hz-15kHz

Power Handling

10W RMS

Sensitivity

92dB

Max SPL

98dB

Dimensions

9.45 x 13.78 x 3.94 in (WxHxD)

Weight

3.64 lbs

M: QW-35-FL

Product Description

Introduction to the Omnitronic WC-1 Speaker System

Welcome to this detailed overview focusing on the Omnitronic WC-1 piece manual essentials for your wall speaker setup. This specific model is engineered for permanent indoor installations within public address networks. It functions as a 100 volt system designed specifically for ELA environments where audio clarity and stability are paramount for any listening area.

Power and Performance Features

You will find excellent flexibility in power management with this versatile model. The unit allows you to select between 5 watts or 10 watts of continuous power through specific colored terminals on the back panel. This ensures you can match the amplifier output perfectly and avoid unnecessary overload issues during operation. The sensitivity is rated at 92 decibels, providing clear audio projection without excessive volume strain on the components. The frequency range spans from 150 hertz up to 15000 hertz, covering essential vocal and instrument frequencies for background music or announcements. The dimensions are compact to fit various wall spaces easily.

Installation Safety Guidelines

Proper mounting is absolutely critical for safety when using this device. The speaker must be attached to a surface capable of supporting five times its weight load effectively. Overhead installations require significant professional experience and accurate calculation to prevent dangerous falling hazards during long-term use. Never mount this device in wet outdoor areas or places with direct sunlight exposure. Ensure adequate ventilation space surrounds the housing to prevent overheating during continuous operation. Always use approved fixings specific for the wall material type you have available. Electrical connections must be made by a qualified electrician to ensure high voltage safety at terminals.

Maintenance and Care Tips

Regular visual inspections are required to maintain safety standards and performance over time. Inspect all mounting screws annually for corrosion or loosening vibrations that may occur over the years. Cleaning should be performed strictly with a soft damp cloth for the grille and casing surface. Do not use chemical solvents or alcohol as these can damage the plastic casing significantly. If distortion occurs, check the amplifier connection immediately with a meter. Never attempt internal repairs yourself without authorization; contact an authorized dealer for service needs. If clacking sounds are heard, screws may have loosened due to vibration.

Final Notes on Usage

Adhering to the Omnitronic WC-1 piece manual ensures longevity and safety for your installation. Always verify local electrical codes before starting the final installation process. Protect users from high sound pressure levels by monitoring maximum output carefully at all times. This guide confirms the device is for indoor use only to maintain warranty terms and safety standards.

M: QW-35-FL

© Copyright 2026 Manual.ly