Manual.ly Logo

Omnitronic WAMS-08BT MK2 Manual

0.0 · 0 Ratings

PDF manual · 32 Pages

English

M: QW-35-FL
page

/ 32

Loading...
620a7e777e1e6f2c3842101692de1402f288 page 13
19
•
EN
2
Safety Instructions
CAUTION!
Keep this device away from rain and moisture!
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires!
HEALTH HAZARD!
By operating speaker systems with an amplifier, you can produce excessive sound pressure
levels that may lead to permanent hearing loss.
This PA system has left our premises in absolutely perfect condition. In order to maintain this condition and
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems.
Unpacking
•
Please make sure that there are no obvious
transport damages. Should you notice any
damages, do not take the device into operation and
immediately consult your local dealer.
•
Save the package and all packing materials. In the
event that a fixture must be returned to the factory,
it is important that the fixture be returned in the
original factory box and packing.
Protection Class
•
This device falls under protection class I. The
power plug must only be plugged into a protection
class I outlet. The voltage and frequency must
exactly be the same as stated on the device.
Wrong voltages or power outlets can lead to the
destruction of the device and to mortal electrical
shock.
Power Cord
•
Always plug in the power plug least. The power
plug must always be inserted without force. Make
sure that the plug is tightly connected with the
outlet.
•
Never let the power cord come into contact with
other cables! Handle the power cord and all
connections with the mains with particular caution!
Never touch them with wet hands, as this could
lead to mortal electrical shock.
•
Never modify, bend, strain mechanically, put
pressure on, pull or heat up the power cord. Never
operate next to sources of heat or cold. Disregard
can lead to power cord damages, fire or mortal
electrical shock.
•
The cable insert or the female part in the device
must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable
may be damaged which may lead to mortal
damage.
•
Make sure that the power cord is never crimped or
damaged by sharp edges. Check the device and
the power cord from time to time.
•
The occupation of the connection cables is as
follows:
Cable
Pin
International
Brown Live L
Blue Neutral N
Yellow/Green
Earth
The earth has to be connected! If the device will be
directly connected with the local power supply
network, a disconnection switch with a minimum
opening of 3 mm at every pole has to be included
in the permanent electrical installation. The device
must only be connected with an electric installation
carried out in compliance with the IEC standards.
The electric installation must be equipped with a
Residual Current Device.
Liquids
•
There must never enter any liquid into power
outlets, extension cords or any holes in the housing
of the device. If you suppose that also a minimal
amount of liquid may have entered the device, it
must immediately be disconnected. This is also
valid, if the device was exposed to high humidity.
Also if the device is still running, the device must
be checked by a specialist if the liquid has reduced
any insulation. Reduced insulation can cause
mortal electrical shock.
Foreign Objects
•
There must never be any objects entering into the
device. This is especially valid for metal parts. If
any metal parts like staples or coarse metal chips
enter into the device, the device must be taken out
of operation and disconnected immediately.
Malfunction or short-circuits caused by metal parts
may cause mortal injuries.

Chat with your Omnitronic WAMS-08BT MK2 manual using AI

Get instant AI answers from your Omnitronic WAMS-08BT MK2 manual

Ask anything about the Omnitronic WAMS-08BT MK2. Answers come from this manual, with the pages they are based on.

WAMS-08BT MK2 Maintenance Schedule

Remind me when maintenance is due
Monthly
Recharge battery during storage

If not in use for a longer period, fully recharge the battery every month to prevent permanent power loss or damage.

Show in the manual (page 29)
Frequent
Clean the device exterior

Use a soft, lint-free, moistened cloth. Never use alcohol or solvents. Disconnect from mains before cleaning.

Show in the manual (page 29)
Regularly
Inspect power cord and device

Check the device and power cord from time to time for damages. Ensure the cord is not crimped or damaged by sharp edges.

Show in the manual (page 19)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WAMS-08BT MK2?

Yes No

Frequently Asked Questions

A

With one battery, the system provides up to 4 hours of continuous playback at full volume. By adding a second optional battery, you can extend the operating time to 8 hours.

Is this answer helpful?

A

Yes, the Omnitronic WAMS-08BT MK2 features a built-in Bluetooth receiver. You can pair your smartphone, tablet, or laptop to stream music directly to the speakers without any cables.

Is this answer helpful?

A

No, wireless microphones are sold separately as an accessory kit called UWM-2HH. This kit includes a USB dongle and two handheld microphones that connect automatically to the system.

Is this answer helpful?

A

The mixer has two mono channels with combo XLR and 6.3 mm jacks suitable for dynamic microphones or instruments. It also includes Hi-Z switches specifically for high-impedance instruments like electric guitars.

Is this answer helpful?

A

Yes, the USB port can be used to charge mobile devices such as smartphones or tablets when not connected to the wireless microphone dongle, providing up to 5V/1A output.

Is this answer helpful?

A

No, the WAMS-08BT MK2 is designed for indoor use. It should be kept away from moisture, rain, and fog to prevent electrical hazards and damage to the electronics.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Lightweight at only 7 kg with a convenient carrying handle
  • Integrated Bluetooth allows wireless music streaming from phones
  • Dual battery capability extends usage time to 8 hours
  • Built-in MP3 player supports USB and SD card formats
  • License-free wireless microphone option available
VS

Disadvantages

  • Battery life is limited to 4 hours with a single battery
  • No internal speaker stand included with the package
  • Wireless microphone kit requires separate purchase
  • Remote control range may be limited by obstacles
  • Device is designed for indoor use only
M: QW-35-FL

Product Specification

Principle

2-way

Tweeter

1x 1"/​25.4mm

Woofer

1x 8"/​203.2mm

Power

40W RMS, 60W Peak

Audio Connections

Stereo Line In (RCA), AUX In (3.5mm Jack), 2x Mic/​Line/​Instrument In (XLR/​1/4in Combo)

Other Connections

USB, Cardreader (SD)

Wireless

Bluetooth

Power Supply

Battery (4h, 4000mAh), Mains operation

SPL max.

106dB

Features

Audio effects, Charging function (USB), portable

Dimensions

10.63x16.54x11.42 in (WxHxD)

Weight

17.09 lbs

M: QW-35-FL

Product Description

Omnitronic WAMS-08BT MK2 - Read, Download & Print Free

The Omnitronic WAMS-08BT MK2 stands out as a compact, lightweight, and incredibly powerful wireless PA system designed for mobile applications. Whether you are a street musician performing outdoors, delivering lectures, hosting family gatherings, or leading an aerobics class, this all-in-one solution offers the flexibility you need without the hassle of tangled cables or constant power outlets.

At its core lies a high-efficiency Class-D amplifier delivering 40 watts of RMS power, ensuring your sound is clear and robust even in noisy environments. The system features a two-way bass-reflex design with an 8-inch woofer and a 1-inch neodymium tweeter, providing deep bass and crisp highs despite its small footprint. Connectivity is seamless thanks to integrated Bluetooth streaming, allowing you to play music directly from smartphones or tablets wirelessly.

Versatility is key with a built-in 3-channel mixer. You have two mono inputs for instruments or wired microphones, complete with Hi-Z switches for guitars and adjustable echo effects, plus a stereo input for line-level devices like CD players or laptops. An MP3 player with SD card and USB support lets you play your own tracks, while a remote control simplifies operation. For larger events, optional wireless microphones can be added via a USB dongle using the license-free 863-865 MHz band.

Powering the device is a rechargeable lithium-ion battery that provides up to four hours of continuous playback at full volume. If you need longer endurance, a second battery can be retrofitted to double the runtime to eight hours. Weighing just over 7 kg and equipped with a sturdy handle and tripod mount flange, the WAMS-08BT MK2 is easy to transport and set up anywhere.

Key Features Overview

  • Portable all-in-one design perfect for mobile use
  • 40-watt Class-D amplifier with excellent sound quality
  • Integrated Bluetooth receiver for wireless audio streaming
  • 3-channel mixer with echo effect and 2-band EQ
  • MP3 player supporting USB drives and SD cards
  • Optional wireless microphone kit available
  • Long-lasting battery with option for dual-battery setup
  • Built-in USB port for charging mobile devices

Notes on Usage

Always ensure the device is placed on a stable, flat surface to prevent tipping. Avoid exposing the unit to rain or extreme temperatures to maintain safety and longevity. When connecting cables, always switch off the system first to avoid loud pops or potential damage to speakers.

M: QW-35-FL

© Copyright 2026 Manual.ly