Manual.ly Logo

Omnitronic UHF-200 BP Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: QW-35-FL
page

/ 12

Loading...
d003d91a94ef750f0b50de5ace5c54c3c88a page c
00074631.DOC, Version 1.2
12/12
6. OPERATION
1
Set the sliding switch to “ON” to switch on the transmitter. The battery indicator shortly lights up.
After switching on the transmitter, a radio connection to the receiver is set up. The reception indicator
RF on the receiver indicates that a connection exists to the transmitter.
2
Speak into the microphone. The volume level can be adjusted by
changing the sensitivity with the gain control in the battery compartment.
Use a small screwdriver to turn the selector switch to another position.
Reduce the sensitivity if the volume of the transmitter signal is too high
and thus distorted. Increase the sensitivity if the volume is too low and a
poor S/N ratio results.
The AF indicator on the receiver lights up when an audio signal from the
microphone is received.
3
To mute the transmitter during operation, set the sliding switch to “MUTE”. Then no sound will be
transmitted.
4
To switch off the transmitter, set the sliding switch to “OFF”.
7. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the batteries. Maintenance and service
operations are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts. Should you have further questions, please
contact your dealer.
8. TECHNICAL SPECIFICATIONS
Item Carrier frequency Color code
13063217 UHF-200 863.010 MHz Red
13063218 UHF-200 863.420 MHz Yellow
13063219 UHF-200 864.300 MHz Green
13063220 UHF-200 864.990 MHz Blue
Coverage: 50 m (with line-of-sight)
RF power output: 10 mW
Modulation method: F3F
Frequency response: 40 Hz - 18 KHz
S/N ratio: >105 dB
Selectivity: >80 dB
T.H.D.: <0.5 % at 1 kHz
Connection: 3.5 mm jack
Battery:: 2 x 1.5 V battery, type AA
Battery life approx. 10 hours
Dimensions: 200 x 650 x 25 mm
Weight: 75 g
Please note: Every information is subject to change without prior notice. 14.01.2015 ©

Chat with your Omnitronic UHF-200 BP manual using AI

Get instant AI answers from your Omnitronic UHF-200 BP manual

Ask anything about the Omnitronic UHF-200 BP. Answers come from this manual, with the pages they are based on.

UHF-200 BP Maintenance Schedule

Frequently
Clean the device with a lint-free cloth

Use a soft, lint-free and moistened cloth. Never use alcohol or solvents.

Show in the manual (page 12)
When indicator lights continuously
Replace the batteries

If the battery indicator lights up continuously during operation, the inserted batteries are going flat and have to be replaced.

Show in the manual (page 11)
After 1-2 weeks of non-use
Remove batteries if not used for long periods

If the transmitter is not used for approx. 1-2 weeks, remove the batteries to prevent damage from leakage.

Show in the manual (page 11)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend UHF-200 BP?

Yes No

Frequently Asked Questions

A

The device requires two 1.5V AA batteries. These provide approximately ten hours of continuous operation.

Is this answer helpful?

A

No, the device is designed for indoor use only due to strict temperature and humidity requirements.

Is this answer helpful?

A

With fresh batteries, the transmitter can be operated for approximately ten hours continuously.

Is this answer helpful?

A

You can adjust the sensitivity using the gain control knob located inside the battery compartment.

Is this answer helpful?

A

The effective range covers about fifty meters depending heavily on local environmental factors and line of sight.

Is this answer helpful?

A

Yes, the operation is license free and approved within the European Union member states.

Is this answer helpful?

A

Use a damp lint free cloth. Never use alcohol or harsh solvents on the surface.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • UHF PLL technology minimizes interference effectively for stable audio transmission in busy environments.
  • Includes convenient lavalier microphone allowing for fully hands-free audio operation during talks.
  • Long battery life of up to ten hours ensures coverage for extended events without interruption.
  • Gain control adjustment allows precise sensitivity tuning to match vocal volume and reduce noise.
  • License free operation within the European Union simplifies setup for regional users significantly.
VS

Disadvantages

  • Only designed for indoor use limits deployment options for outdoor presentations or stadiums.
  • Transmission range is approximately fifty meters so it cannot reach far audience members.
  • Requires disposable AA batteries which adds ongoing cost and environmental waste compared to rechargeable options.
  • Sensitivity requires manual adjustment with a screwdriver rather than automatic audio level control.
  • Moisture and liquid damage are not covered under warranty so liquid protection is critical.
M: QW-35-FL

Product Specification

Type

Pocket Transmitter

Carrier Frequency Range

864.99MHz

True Diversity

no

Battery Life

10h

Frequency Response

40Hz-18kHz

Includes

Pocket Transmitter, Lavalier Microphone

M: QW-35-FL

Product Description

Elevate Your Audio Presence With Professional Grade Gear

Achieving crystal clear sound transmission is vital for professional speakers and presenters. The Omnitronic UHF-200 BP stands out as a robust choice for wireless audio systems. When reviewing the Omnitronic UHF-200 BP Manual specifications, the durability becomes evident throughout the build quality. This pocket transmitter integrates advanced UHF PLL technology designed to minimize interference problems effectively for users. You can expect a stable connection within the low-interference UHF band suitable for busy venues and classrooms. The device includes a dedicated lavalier microphone for true hands-free operation in various scenarios today. This setup allows you to move freely while maintaining high fidelity audio capture for your audience without cables restricting motion.

Seamless Wireless Connectivity and Features

Operational flexibility remains a key priority when utilizing wireless gear for live corporate events. You can adjust the input sensitivity using the built-in gain control knob located inside the battery compartment easily. This adjustment ensures optimal volume levels without signal distortion during intense usage or high vocal projection. The unit operates on two standard AA batteries, providing approximately ten hours of continuous runtime for long sessions without worry. An LED indicator warns you clearly when power is running low and needs immediate replacement to avoid interruption. A mute switch allows you to silence the transmission instantly during pauses or silence in a performance. The effective range covers about fifty meters depending heavily on local environmental factors and line of sight challenges. It is specifically designed for indoor environments with strict temperature limits between minus five and forty five degrees Celsius. Humidity levels must also be kept manageable to protect internal components from moisture damage and corrosion risks. The frequency response spans forty to eighteen kilohertz for balanced sound reproduction.

Practical Operation and Maintenance Standards

Maintenance ensures significant longevity for your valuable equipment over many years of hard use. Simply wipe the surface regularly with a damp lint free cloth to remove dust accumulation effectively. Avoid harsh chemicals like alcohol which could damage the plastic casing over long periods of daily use. Keep moisture away from the electronic components to prevent internal corrosion issues that halt operation permanently. The system includes four distinct frequency options for different market regions and licensing requirements worldwide. Always verify the selected frequency matches your specific receiver unit for proper pairing and signal stability. Safety protocols recommend removing batteries if unused for several weeks to save power for next time effectively. This prevents leakage issues that could cause permanent damage to the internal circuitry and void warranties. Secure the belt clip firmly to your clothing for maximum stability during movement and gestures. This comprehensive setup ensures professional audio results for any corporate event or educational presentation globally.

Battery safety is critical for long term storage and transport of the device to the next job. This attention to detail regarding the Omnitronic UHF-200 BP Manual guidelines guarantees safety for everyone.

M: QW-35-FL

© Copyright 2026 Manual.ly