Manual.ly Logo

Omnitronic OD-22T Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-5-NAN
page

/ 12

Loading...
101416ed0637915c2a1d3058d91152fb09bd page a
10
The durability of the installation depends very much on the material used at the installation area (building
material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to
suit the wall material. Always ask a specialist for the correct plug/screw combination indicating the maximum
load and the building material.
Choosing an Appropriate Amplifier
This speaker must only be connected with an appropriate amplifier. Observe the correct power matching.
The total load presented to the amplifier must not exceed the rated output of the amplifier. Before starting
with the installation, you must clarify how many speakers you would like to install in the room.
Electrical Connection
Cabling a PA system is an electric installation which must only be carried out by a qualified electrician!
Always insulate the connection cables which are not used. Pay attention to the correct power matching.
Overload will result in damage of the PA amplifier and of the speaker:
Step 1: If the PA system is turned on, turn it off before making any connection.
Step 2: Connect the speaker to the 100 V output of the PA amplifier (black clamp = negative pole, red
clamp = positive).
Step 3: When connecting several speakers, make sure that all speakers have the same polarity and that
the amplifier is not overloaded.
Notes Regarding Operation
During operation, please make sure the speaker always sounds well. When distortions can be heard, either
the amplifier or the speaker is overloaded. Overloads can quickly lead to amplifier or speaker damage. In
order to avoid damage, please reduce the volume immediately when distortions can be heard. When
speakers are destroyed by overload, the guarantee becomes void. Always check the sound pressure level
with a meter in order to keep to the threshold.
..............................................................................................................................................................................
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test. The operator has to make sure that safety-
relating and machine-technical installations are inspected by a skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the speaker systems or parts of the speaker system have to be tightly
connected and must not be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the speaker system. Please use a soft lint-free and moistened cloth.
Never use alcohol or solvents!
There are no serviceable parts inside the speaker system. Maintenance and service operations are only to
be carried out by authorized dealers.
DANGER TO LIFE!
High voltage at terminals. Installation by skilled personnel only.
Turn off PA system before connecting.

Chat with your Omnitronic OD-22T manual using AI

Get instant AI answers from your Omnitronic OD-22T manual

Ask anything about the Omnitronic OD-22T. Answers come from this manual, with the pages they are based on.

OD-22T Maintenance Schedule

Remind me when maintenance is due
Frequent
Clean the speaker system

Use a soft, lint-free, moistened cloth. Never use alcohol or solvents.

Show in the manual (page 10)
Before every operation
Check that the speaker is securely fixed

Especially for public use, check the speaker system and its speakers are securely fixed before every operation.

Show in the manual (page 11)
Yearly
Have safety installations inspected by a skilled person

Inspect mounting screws for tightness and corrosion, check housings and fixings for deformation, and inspect cables for damage, fatigue, or deposits.

Show in the manual (page 10)
Every four years
Have safety installations inspected by an expert

Have safety-related and machine-technical installations inspected as part of an acceptance test.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend OD-22T?

Yes No

Video Manual

How to Balance your Tonearm - Turntable Setup | Bop DJ

Frequently Asked Questions

A

The OD-22T is designed for indoor permanent 100V PA installations such as restaurants, bars, shops and conference rooms. It is not suited for outdoor exposure to rain, splash water, or high humidity environments.

Is this answer helpful?

A

Connect the speaker to the amplifier's 100V output using the spring clamps (red = positive, black = negative). Ensure all speakers are wired with the same polarity and that the amplifier’s total load is not exceeded. Turn off the PA system before making connections; have a qualified electrician perform cabling if required.

Is this answer helpful?

A

The OD-22T has a program power rating of 30 W and nominal 15 W RMS, with 88 dB sensitivity and a maximum SPL of about 95 dB at 1 m. These specs suit voice and background music applications when deployed and powered correctly.

Is this answer helpful?

A

Regularly inspect mounting hardware, housings and cables for corrosion, deformation or wear. Tighten any loose screws and verify secure attachments before public use. Clean with a soft damp cloth only and avoid solvents. For commercial use, follow yearly checks by a skilled person and full inspections every four years where required.

Is this answer helpful?

A

If distortion occurs, immediately reduce volume — distortion indicates overload or a fault. Test the speaker on another amplifier; if distortion persists, stop use and consult an authorized service center. Clattering can indicate loose screws; have a qualified technician inspect mounting and internal fixings.

Is this answer helpful?

A

Overhead mounting is possible but requires extensive experience: correct load calculations, appropriate fixtures, and regular safety inspections. If you lack qualifications, hire a professional installer. Installation surfaces must support at least five times the device point load and installations must be vibration-free and planar.

Is this answer helpful?

A

Yes. Operate between -5°C and +45°C, with relative humidity not exceeding 50% at 45°C. Keep at least 0.5 m from fog/smoke machines and ensure good ventilation. Avoid exposure to moisture, solvents, and excessive dust or heat for safe and reliable operation.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact dual-driver design delivers clear, natural speech for PA and background music.
  • Integrated 100V transformer simplifies multi-speaker distribution and installation.
  • Durable ABS enclosure with metal grille resists scratches and looks discreet in venues.
  • Swivel mounting plate enables versatile wall or ceiling angling for optimal coverage.
  • Lightweight pair with spring-clamp connections for fast, professional installations.
VS

Disadvantages

  • Designed for indoor fixed installations only; not weatherproof for outdoor use.
  • Limited low-frequency extension (from ~120 Hz) — not suited for bass-heavy music.
  • Requires qualified installation and correct amplifier matching to avoid overload.
  • No user-serviceable internal parts; repairs must be handled by authorized service.
  • Plastic cabinet materials are normally flammable and may require treatment if B1 rating is needed.
M: OA-GPT-5-NAN

Product Specification

Principle

1-Way

Woofer

2x 2.50"

Amplification

passive

Frequency range

120Hz-22kHz

Power handling

6W RMS, 30W Peak

Impedance

8 ohm

Sensitivity

88dB

Max SPL

95dB

Dispersion angle

60°x60°

Dimensions

8.23x4.33x4.29in (WxHxD)

Weight

2.43lb

M: OA-GPT-54-NAN

Product Description

Omnitronic OD-22T 100V — Reliable 100V Wall Speaker Pair

The Omnitronic OD-22T 100V is a compact, purpose-built wall speaker system designed for permanent 100‑volt PA installations. Featuring dual 6 cm full-range drivers and a passive membrane, the OD-22T delivers clear voice reproduction and consistent coverage for small to medium indoor spaces like restaurants, shops, bars and conference rooms. Housed in a durable ABS cabinet with a metal grille and supplied with a robust swivel mounting plate, the pair allows flexible angling for wall or ceiling mounting and straightforward spring-clamp connections for fast installation.

Key Features and Use Cases

Packed as a pair and equipped with an integrated 100V transformer, the OD-22T supports easy integration into centralized PA systems. Its 30 W program power rating and 88 dB sensitivity ensure intelligible playback at conversational and background-music levels, while a frequency response down to about 120 Hz keeps speech natural and present. The compact footprint and lightweight construction make it suitable for multi‑speaker deployments where discreet, consistent coverage is required — retail stores, hospitality venues, meeting rooms and corridors are typical applications.

Installation and operation emphasize safety and longevity: the speaker is intended for indoor, fixed installations only, must be mounted on suitably rated surfaces, and should be connected by qualified personnel. Regular maintenance checks — tightening fasteners, inspecting mounts and cables, and avoiding exposure to moisture, solvents or excessive heat — preserve performance and safety. When used within rated limits and installed correctly, the OD-22T provides dependable background music and paging performance with minimal visual impact.

Practical Notes

  • The OD-22T is optimized for 100V distribution systems; match amplifier capacity to the total speaker load to avoid overload.
  • If distortion appears, immediately lower volume and investigate amplifier load or speaker faults.
  • Maintain at least 50 cm clearance around the unit for ventilation; protect against moisture and direct fog/smoke jets.

Notes:

  • Intended for permanent indoor installation; installation by qualified professionals recommended.
  • Use only original spare parts for repairs; there are no user-serviceable components inside.
  • Observe regular inspection intervals in public or commercial settings to ensure safe mounting.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly