Manual.ly Logo

Omnitronic MOLLY-12A Manual

0.0 · 0 Ratings

PDF manual · 28 Pages

English

M: QW-35-FL
page

/ 28

Loading...
e601a1e4c4b8bd8a112d87f6b3f4291e7d30 page c
12
•
DE
7
Reinigung und Wartung
Das Gerät sollte regelmäßig von Verunreinigungen wie Staub usw. gereinigt werden. Trennen Sie das Gerät
zuvor vom Netz. Verwenden Sie zur Reinigung ein fusselfreies, angefeuchtetes Tuch. Verwenden Sie auf
keinen Fall Alkohol oder irgendwelche Lösungsmittel, da sonst die Gehäuseoberflächen beschädigt werden
könnten. Vermeiden Sie unbedingt das Eindringen von Nässe oder Feuchtigkeit in das Gerät.
Klingt das PA-System verzerrt, ist eventuell einer der Lautsprecher defekt. Um weitere Schäden an der Box
zu vermeiden, setzen Sie sich bitte mit einer Fachwerkstatt in Verbindung. Wenn an der Lautsprecherbox
klappernde Geräusche hörbar sind, könnte es sein, dass sich Schrauben durch Vibrationen gelöst haben. In
diesem Fall sollte die Lautsprecherbox von einem Fachmann überprüft werden.
Im Geräteinneren befinden sich außer der Sicherung bei Modell MOLLY-12A keine zu wartenden Teile.
Wartungs- und Servicearbeiten sind ausschließlich dem autorisierten Fachhandel vorbehalten! Sollten
einmal Ersatzteile benötigt werden, verwenden Sie bitte nur Originalersatzteile. Wenn die Anschlussleitung
dieses Geräts beschädigt wird, muss sie durch eine besondere Anschlussleitung ersetzt werden, die von
Ihrem Fachhändler erhältlich ist. Sollten Sie noch weitere Fragen haben, steht Ihnen Ihr Fachhändler
jederzeit gerne zur Verfügung.
Sicherungswechsel (MOLLY-12A)
Wenn die Feinsicherung des Gerätes defekt ist, darf diese nur durch eine Sicherung gleichen Typs ersetzt
werden. Vor dem Sicherungswechsel ist das Gerät allpolig von der Netzspannung zu trennen (Netzstecker
ziehen).
So gehen Sie vor:
Schritt 1: Öffnen Sie den Sicherungshalter an der Geräterückseite mit einem passenden Schrauben-
dreher.
Schritt 2: Entfernen Sie die defekte Sicherung aus dem Sicherungshalter.
Schritt 3: Setzen Sie die neue Sicherung in den Sicherungshalter ein.
Schritt 4: Setzen Sie den Sicherungshalter wieder im Gehäuse ein.
8
Umweltschutz
Informationen zur Entsorgung
Bitte übergeben Sie das Gerät bzw. die Geräte am Ende der Nutzungsdauer zur
umweltgerechten Entsorgung einem örtlichen Recyclingbetrieb. Geräte, die mit diesem Symbol
gekennzeichnet sind, dürfen nicht im Hausmüll entsorgt werden.
Für weitere Informationen
wenden Sie sich bitte an Ihren Händler oder die zuständige örtliche Behörde. Entnehmen Sie evtl.
eingelegte Batterien und entsorgen Sie diese getrennt vom Produkt.
Als Endverbraucher sind Sie durch die Batterieverordnung gesetzlich zur Rückgabe aller
gebrauchten Batterien und Akkus verpflichtet. Die Entsorgung über den Hausmüll ist verboten.
Verbrauchte Batterien können Sie unentgeltlich bei den Sammelstellen Ihrer Gemeinde und
überall, wo Batterien verkauft werden, abgeben. Mit der Verwertung von Altgeräten und der
ordnungsgemäßen Entsorgung von Batterien und Akkus leisten Sie einen wichtigen Beitrag zum
Schutz unserer Umwelt.

Chat with your Omnitronic MOLLY-12A manual using AI

Get instant AI answers from your Omnitronic MOLLY-12A manual

Ask anything about the Omnitronic MOLLY-12A. Answers come from this manual, with the pages they are based on.

MOLLY-12A Maintenance Schedule

Regularly
Clean the device exterior

Disconnect from mains and use a soft, lint-free, moistened cloth. Never use alcohol or solvents as they may damage the surface.

Show in the manual (page 12)
Periodically
Inspect device and power cord

Check the device and the power cord for damages from time to time to ensure safe operation.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend MOLLY-12A?

Yes No

Frequently Asked Questions

A

Yes, use the MIX OUT XLR outputs to link further MOLLY-12A subwoofers or active speakers. This allows for expanded coverage in larger venues. The signal passes through the chain. Ensure all units are powered and connected prior to operation.

Is this answer helpful?

A

The subwoofer delivers 500 watts RMS for low frequencies and 2 x 100 watts RMS for high frequencies at 8 ohms. Total power handling is significant for most live applications. Check specifications for different impedance requirements.

Is this answer helpful?

A

Yes, there is an integrated Bluetooth receiver. You can stream audio wirelessly from smartphones, tablets, and notebooks. Pair by holding the Bluetooth button until the indicator light flashes.

Is this answer helpful?

A

Use the SATELLITE OUT Left and Right jacks on the subwoofer. Run speaker cables to the satellite input terminals. You can daisy-chain up to two satellites per output channel efficiently.

Is this answer helpful?

A

Absolutely. Connect the subwoofer to a passive AV receiver output. Use the satellites for channel separation or main audio if designed for the setup. It supports various home cinema configurations.

Is this answer helpful?

A

It follows Protection Class I standards. Ensure your electrical installation includes a residual current device for safety. Do not use outdoors or in wet conditions.

Is this answer helpful?

A

Yes, the subwoofer has an M20 metal flange. Mount satellites vertically using an optional distance tube or directly on the flange if using specific brackets.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful Class-D amplifier with DSP for precise sound control
  • Flexible expansion capabilities support 2.1 and 4.1 configurations easily
  • Integrated Bluetooth streaming allows wireless connection from mobile devices
  • Robust housing features scratch-resistant lacquer and steel grilles
  • Extensive safety protection circuits prevent damage from overheating or overload
VS

Disadvantages

  • Indoor use only limits outdoor performance in adverse weather conditions
  • Some advanced accessories like stands or extension brackets are sold separately
  • Satellites require specific mounting brackets for wall or ceiling installation
  • High volume settings trigger limit indicators if signal levels become too high
  • Fuse replacement requires access to the rear panel and power disconnection
M: QW-35-FL

Product Specification

Principle

2-Way

Tweeter

1x 1"

Midrange

1x 6.5"

Woofer

1x 12"

Frequency Response

40Hz-20kHz

Power Output

960W RMS

Audio Inputs

Stereo Line In (RCA), AUX In (1/8" Jack), 2x Mic/Line In (XLR/1/4" Combo)

Wireless

Bluetooth

Power Supply

Mains Power

Features

DSP

Weight

87.96 lbs

Components

4 Compact Speakers, 1 Subwoofer

M: QW-35-FL

Product Description

Omnitronic Premium Audio Systems

The Omnitronic MOLLY-12A + 4x MOLLY-6 Manual guides users through a high-energy audio setup. This combination delivers exceptional bass and clarity for diverse environments. The core unit features a 12-inch bass-reflex subwoofer designed for mobile live applications. With 500 watts RMS for low frequencies and dual 100 watt channels, volume is never an issue. Users appreciate the included digital signal processing which manages sound with precision. Four distinct equalizer modes allow rapid adjustment for music, speeches, or DJ events.

Connectivity options are extensive. Bluetooth streaming supports wireless playback from modern mobile devices. This eliminates cable clutter during performances. Signal inputs accommodate mixers and AV receivers via XLR or RCA jacks. Outputs facilitate linking additional systems for larger venues. The frequency response spans from 45 Hz to 20 kHz across the full system range. Satellite speakers complete the setup by delivering mid and high-frequency response. They operate in parallel to create immersive 2.1 or 4.1 surround sound fields.

Durability is a key feature of this product series. Multiplex wood enclosures resist damage during transport. Steel grilles protect drivers from physical impacts. Finished with scratch-resistant lacquer, the units look professional. Mounting flexibility includes bracket options for walls and ceilings. The subwoofer can support satellite speakers on a dedicated flange. This vertical stacking saves floor space in small rooms.

Safety mechanisms protect both equipment and personnel. Thermal limits prevent overheating during extended use. A limiter protects speakers from distortion and signal overload. Visual LEDs inform users about power or fault states clearly. Installation requires indoor environments to ensure longevity. Moisture exposure must be avoided completely. Users should follow power cord guidelines to prevent electrical hazards. Maintenance involves simple cleaning with damp cloths. Solvents can damage the finish and should be avoided. Regular inspection of cables ensures safety. Spare parts like fuses are accessible for replacement. Professional service is recommended for internal repairs. This system remains a staple for commercial and home audio needs.

In conclusion, the power and flexibility of this configuration are unmatched. It suits installations in bars, stores, and private homes. The Omnitronic MOLLY-12A + 4x MOLLY-6 Manual provides setup data. It also includes a phase reversal switch to correct alignment issues. This ensures coherent sound reproduction across all speaker placements. Transport bags are available for optional protection during long journeys. Users enjoy reliable sound reinforcement without excessive complexity. Whether for background music or high-impact events, this choice delivers.

M: QW-35-FL

© Copyright 2026 Manual.ly