Manual.ly Logo

Omnitronic AZX-11.A Manual

0.0 · 0 Ratings

PDF manual · 32 Pages

English

M: OA-GPT-5-NAN
page

/ 32

Loading...
71e5d36a7a2fe56bd8d740416778d824c23e page e
14
8
REINIGUNG UND WARTUNG
Der Unternehmer hat dafür zu sorgen, dass sicherheitstechnische und maschinentechnische Einrichtungen
mindestens
- alle vier Jahre durch einen Sachverständigen im Umfang der Abnahmeprüfung geprüft werden.
- mindestens einmal jährlich durch einen Sachkundigen geprüft werden. Dabei muss unter anderem auf
folgende Punkte besonders geachtet werden:
1) Alle Schrauben, mit denen die Box oder Gehäuseteile montiert sind, müssen fest sitzen und dürfen nicht
korrodiert sein.
2) An Gehäuse, Befestigungen und Montageort (Decke, Abhängung, Traverse) dürfen keine Verformungen
sichtbar sein.
3) Die elektrischen Anschlussleitungen dürfen keinerlei Beschädigungen, Materialalterung (z.B. poröse
Leitungen) oder Ablagerungen aufweisen. Weitere, auf den jeweiligen Einsatzort und die Nutzung
abgestimmte Vorschriften werden vom sachkundigen Installateur beachtet und Sicherheitsmängel
behoben.
4) Wurde die Box über Kopf montiert, muss überprüft werden, ob die Ringösen noch fest verschraubt sind.
Ansonsten Ringösen wieder handfest anziehen.
Die Lautsprecherbox sollte regelmäßig von Verunreinigungen wie Staub usw. gereinigt werden. Verwenden
Sie zur Reinigung ein fusselfreies, angefeuchtetes Tuch. Auf keinen Fall Alkohol oder irgendwelche
Lösungsmittel zur Reinigung verwenden! Im Gehäuseinneren befinden sich keine zu wartenden Teile.
Wartungs- und Servicearbeiten sind ausschließlich dem autorisierten Fachhandel vorbehalten!
Klingt die Lautsprecherbox verzerrt ist eventuell einer der Lautsprecher defekt. In diesem Fall die Laut-
sprecherbox ggf. nochmals an einem anderen Verstärker testen. Ist der Klang danach immer noch verzerrt
sollte die Lautsprecherbox nicht mehr weiter betrieben werden, um weitere Schäden an der Box zu
vermeiden. Setzen Sie sich in diesem Fall bitte mit einer Fachwerkstatt in Verbindung.
Wenn an der Lautsprecherbox klappernde Geräusche hörbar sind könnte es sein, dass sich Schrauben
durch die ständigen oder übermäßigen Vibrationen gelöst haben. In diesem Fall sollte die Lautsprecherbox
von einem Fachmann überprüft werden. Außerdem muss speziell im gewerblichen Bereich vor jedem
Einsatz der Lautsprecherbox geprüft werden, ob die Lautsprecherbox und die Lautsprecher in der
Lautsprecherbox noch sicher befestigt sind.
Sollten einmal Ersatzteile benötigt werden, verwenden Sie bitte nur Originalersatzteile. Sollten Sie noch
weitere Fragen haben, steht Ihnen Ihr Fachhändler jederzeit gerne zur Verfügung.
Sicherungswechsel
Wenn die Feinsicherung des Gerätes defekt ist, darf diese nur durch eine Sicherung gleichen Typs ersetzt
werden.
Vor dem Sicherungswechsel ist das Gerät allpolig von der Netzspannung zu trennen (Netzstecker
ziehen).
Vorgehensweise:
Schritt 1: Öffnen Sie den Sicherungshalter an der Geräterückseite mit einem passenden Schraubendreher.
Schritt 2: Entfernen Sie die defekte Sicherung aus dem Sicherungshalter.
Schritt 3: Setzen Sie die neue Sicherung in den Sicherungshalter ein.
Schritt 4: Setzen Sie den Sicherungshalter wieder im Gehäuse ein.
LEBENSGEFAHR!
Vor Wartungsarbeiten unbedingt allpolig vom Netz trennen!

Chat with your Omnitronic AZX-11.A manual using AI

Get instant AI answers from your Omnitronic AZX-11.A manual

Ask anything about the Omnitronic AZX-11.A. Answers come from this manual, with the pages they are based on.

AZX-11.A Maintenance Schedule

Remind me when maintenance is due
Yearly
Inspect safety equipment

A skilled person must inspect safety-relating and machine-technical installations annually.

Show in the manual (page 14)
Every 4 years
Expert acceptance test

An expert must inspect safety-relating and machine-technical installations every four years during an acceptance test.

Show in the manual (page 14)
Before use
Check screw tightness

Before operation, especially in public areas, check that all screws and speakers are securely fastened.

Show in the manual (page 14)
As needed
Clean exterior

Regularly clean the speaker system with a soft, lint-free, moistened cloth. Do not use alcohol or solvents.

Show in the manual (page 14)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AZX-11.A?

Yes No

Frequently Asked Questions

A

The AZX-11.A follows AZX-series I/O conventions with combo XLR/6.3 mm (1/4") mic/line inputs and balanced XLR link outputs for daisy-chaining additional active speakers. Use the MIC/LINE selector for proper input sensitivity.

Is this answer helpful?

A

Yes, but overhead or flown installations must be carried out by qualified personnel using DIN-compliant rigging hardware and a redundant safety bond. Eye bolts must be hand-tightened to spec and rated at least 12× the box weight; the maximum unsecured mounting height without secondary attachment is 1 m.

Is this answer helpful?

A

Start with all level controls down, power up sources first, then bring the unit up slowly. Monitor the LIMIT LED; frequent illumination indicates overload—reduce source or master levels immediately to prevent damage and voiding the warranty.

Is this answer helpful?

A

Externally clean with a soft, damp, lint-free cloth—no solvents. Inspect fasteners, rigging points and cables regularly. Internal service should be performed only by authorized technicians. Replace fuses only when the unit is disconnected and with identical type and rating.

Is this answer helpful?

A

Yes. The AZX-11.A is designed for touring and fixed installations: rugged cabinet, multiple mounting options, onboard controls for integration with subwoofers and satellite systems, and Class D amplification for efficient output.

Is this answer helpful?

A

Operate the speaker between -5°C and +45°C and avoid prolonged direct sunlight or heat sources. Protect the unit from moisture and liquids; if exposure occurs, disconnect power and have a professional inspect the unit before reuse.

Is this answer helpful?

A

Keep signal cables short and direct; use balanced cables for long runs to reduce noise and HF loss. Use high-quality connectors and secure cables to prevent mechanical strain or accidental disconnection.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Robust multi-purpose cabinet with stand, wall and flown mounting options.
  • Combo XLR/1/4" inputs plus parallel XLR outputs for flexible chaining.
  • Onboard tone controls and HF trim enable quick sound shaping.
  • Limiter and status LEDs provide protection feedback to prevent overload.
  • Class D amplification and bass-reflex design for efficient power delivery.
VS

Disadvantages

  • Overhead or flown installations require qualified rigging personnel and certified hardware.
  • Warranty void if unauthorized modifications are made or serial barcode removed.
  • Heavier units may require two-person handling and appropriate transport packing.
  • Exposure to moisture or liquids will necessitate professional inspection before reuse.
  • Long cable runs require balanced wiring and quality cables to avoid noise and HF loss.
M: OA-GPT-5-NAN

Product Specification

Amplification

active

Frequency Range

40Hz-250Hz

M: OA-GPT-54-NAN

Product Description

Omnitronic AZX-11.A, Stück Manual

The Omnitronic AZX-11.A represents a rugged, user-focused active speaker solution tailored for live sound, touring and fixed installations. Built on proven AZX-series design principles, the unit combines robust construction, flexible mounting options and practical onboard controls to deliver reliable performance in demanding environments. Its compact yet sturdy cabinet supports stand, wall and flown installations, with dedicated rigging points and safety provisions for overhead use.

With practical I/O, the AZX-11.A accepts both mic and line signals via combo XLR/1/4" connectors and offers parallel XLR outputs for chaining additional active speakers. Tone shaping is straightforward: high and low controls plus an HF trim let you tailor the top and bottom character quickly. For subwoofer integration the AZX-series sub models include crossover and phase controls so the AZX-11.A pairs cleanly with low-frequency modules for full-range coverage.

Safety and longevity are emphasized: the speaker follows protection-class I wiring, uses a fused IEC inlet for mains connection, and includes limiter indication to warn of overload conditions. The manual highlights installation requirements (minimum surface load capacities, maximum unsecured mounting heights), correct rigging hardware, and environmental limits (-5°C to +45°C). Rigging and flown configurations demand qualified personnel, appropriate DIN-rated hardware and redundant safety links—measures that reduce risk during overhead operation.

Operation is intuitive: power on after sources, set input selector to MIC/LINE as needed, and bring levels up slowly while watching LIMIT indicators to avoid distortion. Balanced wiring and short cable runs are recommended to minimize noise and preserve high-frequency content. Routine maintenance is minimal—external cleaning with a damp cloth, periodic inspections of fasteners, cabling and rigging—while internal servicing is reserved for authorized technicians.

Technical highlights derived from the AZX family include Class D amplification, bass-reflex designs, and various model-specific driver configurations to match application needs. The AZX-11.A retains the series’ emphasis on practical performance, ease of integration into satellite or flown arrays, and clear user guidance for safe installation and operation.

Notes:

  • Use only recommended rigging hardware and follow load-factor guidance. Ensure safety bonds are installed for any overhead mounting.
  • Replace fuses only when powered off and with identical type and rating. Keep the serial barcode intact to preserve warranty.
  • For highest audio quality, use balanced cabling for long runs and secure cables to avoid mechanical stress.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly