Manual.ly Logo

Nolan N87 Manual

0.0 · 0 Ratings

PDF manual · 96 Pages

English

M: QW-35-FL
page

/ 96

Loading...
178eec38832e9fa402f58a3aea6f68999e18 page f
14 15
Checking and adjusting the PINLOCK
®
inner visor stretch
Check the correct PINLOCK
®
inner visor assembly by opening and closing the visor
and making sure that they do not move.
If the PINLOCK
®
inner visor is not tightly xed to the visor, move both external adjust-
ment levers upwards to increase the stretch (Fig. 14). This operation must be carried
out gradually. The maximum stretch is achieved when the pin adjustment external
levers are turned outwards.
WARNING
- The presence of dust between the two visors may produce scratches on both
surfaces.
- Scratched PINLOCK
®
visors and inner visors may cause reduced visibility and
must therefore be replaced.
- Regularly check the correct stretch of the PINLOCK
®
inner visor to prevent it from
moving and scratching both surfaces.
- If the helmet visor fogs up and/or condensation forms between the visors, check
that the PINLOCK
®
inner visor is both correctly assembled and stretched.
- An excessive and early stretch of the PINLOCK
®
inner visor may result in exces-
sive adherence against the visor surface and/or permanent deformations with
subsequent inability to correctly perform any following adjustments.
- Intense sweating/breathing, the use under particular weather conditions (low
temperatures, and/or high humidity and/or sudden changes in temperature and/
or heavy rain) and/or intense and prolonged use may affect the performance of
the PINLOCK
®
inner visor and cause fogging or formation of condensation. In
such cases, after using the helmet and to restore the system efciency, remove
the PINLOCK
®
inner visor from the helmet visor and let it dry with dry and warm
air. The same procedure must be applied to the helmet, in order to dry out humid-
ity in case it has formed up as a consequence of the conditions described above.
4. Inner visor PINLOCK
®
disassembly
4.1 Remove the visor equipped with the Pinlock
®
inner visor (see instructions above).
4.2 Widen the visor and release the Pinlock
®
inner visor from the pins (Fig.6).
4.3 Release the visor.
Maintenance and cleaning
- Remove the PINLOCK
®
inner visor from the visor. Using a damp and soft cloth,
gently clean it with neutral liquid soap. Remove the soap under running water.
- Dry the inner visor with dry and warm air without wiping it.
- To keep the features of the inner visor in good conditions over time, let the helmet
dry in a ventilated and dry place with the visor open after use. Keep it away from
heat sources and store it in a place away from direct light.
- Do not use solvents or chemical products.
VISION PROTECTION SYSTEM (VPS)
The exclusive inner VISION PROTECTION SYSTEM (VPS) is a LEXAN™ (*) polycar-
bonate moulded sunscreen with scratch-resistant/fog-resistant treatment. Very sim-
ple and practical to use. Just lower to activate it or lift to remove it from the eld of
vision. It is useful in all sorts of situations, both on long journeys out of town and
(*)
LEXAN is a trademark of SABIC.

Chat with your Nolan N87 manual using AI

Get instant AI answers from your Nolan N87 manual

Ask anything about the Nolan N87. Answers come from this manual, with the pages they are based on.

N87 Maintenance Schedule

Regularly
Check PINLOCK inner visor stretch

Regularly check the correct stretch of the PINLOCK inner visor to prevent it from moving and scratching both surfaces.

Show in the manual (page 15)
After Use
Dry helmet and inner visor

After use, especially in humid conditions, remove the PINLOCK visor and dry with warm air. Let the helmet dry in a ventilated place with the visor open.

Show in the manual (page 15)
Before Each Use
Inspect VPS cleanliness and function

Always make sure that the VPS is clean and operating properly to avoid scratches or anomalous wear when activated.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend N87?

Yes No

Frequently Asked Questions

A

Use only lukewarm water and neutral soap. Do not use solvents or chemicals. Wash by hand, never machine wash. Dry at room temperature away from heat and sun.

Is this answer helpful?

A

No, the Vision Protection System must be deactivated at night or when visibility is poor. It reduces light transmittance significantly.

Is this answer helpful?

A

Helmets must be replaced after any violent impact. Internal damage may not be visible, so safety cannot be guaranteed for reuse.

Is this answer helpful?

A

You may need to remove foam fillers from cheek pads for earphones. Use provided supports to attach keypads. Check with an authorized dealer for kits.

Is this answer helpful?

A

Yes, cheek padding can be adjusted or modified to create space for eyewear adaptivity using specific instructions provided.

Is this answer helpful?

A

Try on different sizes for best fit. Helmet should be stable and snug. Too large may cover eyes or rotate during rides.

Is this answer helpful?

A

Remove padding by detaching hooks and tapes. Wash gently with neutral soap and water max 30 degrees Celsius. Air dry away from sunlight.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Advanced VPS sun visor system for glare reduction
  • Excellent airflow ventilation for temperature control
  • Compatible with N-Com communication systems
  • Removable and washable inner padding for hygiene
  • Includes fog-resistant Pinlock insert option
VS

Disadvantages

  • Requires manual washing only, no machine allowed
  • Cannot use after significant impact without replacement
  • Sizing must be precise for safety retention
  • VPS not usable in low light conditions
  • Installation of N-Com requires removing foam inserts
M: QW-35-FL

Product Specification

Type

Full-face Helmet

Special Features

integrated sun visor

Weight

3.31 lbs

M: QW-35-FL

Product Description

Discover the Nolan N87 Classic Rider Gear

Welcome to the ultimate riding experience with the Nolan N87 Classic. This premium helmet is designed for riders who demand safety and comfort in equal measure. Available in various colors and sizes, it ensures a tailored fit for every individual type. Whether you travel through bustling city lights or open countryside roads, this gear provides the confidence needed for safe navigation. The design focuses on modern aesthetics while prioritizing maximum protection standards. Safety is not just a feature but a core philosophy of the Nolan brand.

Superior Ventilation and Cooling

Staying cool on long journeys matters immensely. The ventilation system channels fresh air efficiently from the chin and front intakes. This design uses AIRBOOSTER TECHNOLOGY to direct flow to the head without dispersion. Warm air is extracted via a rear spoiler, maintaining optimal internal temperatures. Riders often find this aspect crucial for fatigue reduction. The airflow management system is adjustable to suit different weather conditions, allowing full openness or complete sealing. Proper ventilation helps prevent fog and keeps the rider alert throughout the trip.

Advanced Vision Protection

Clear sight is vital for accident prevention. The Vision Protection System acts as an internal sunshade that drops with a simple slider movement. This allows riders to handle bright sunlight without taking the main visor down. It works independently of the primary shield, offering flexibility in changing light conditions. Fog resistance is handled by the included Pinlock system. This double-layer technology prevents condensation buildup. Cleaning the visor requires neutral soap only to avoid damaging protective coatings. Chemicals can ruin the scratch-resistant layers.

Comfort and Customization

The interior padding is removable, making washing straightforward. This feature helps maintain hygiene and freshness after intense rides. The liner fits snugly but allows for proper airflow. Cheek pads can be adjusted to accommodate eyewear or communication equipment. The helmet accommodates N-Com systems for seamless connectivity. When installing these, specific foam inserts may need removal. Ensure all mechanisms function correctly before riding. Regular inspections should check for any signs of wear or damage to the retention system.

Maintenance and Safety Checks

Routine maintenance keeps the helmet in peak condition. Never use the helmet after a violent impact as internal damage may be invisible. If doubts arise, consult an authorized dealer for inspection. Keep it away from heat sources like exhausts to prevent shell deformation. Washing should be done by hand with lukewarm water. Machine washing is strictly prohibited. This ensures the padding retains its shape and shock absorption capabilities. Adhering to these care protocols extends the product lifespan significantly. Enjoy the ride with peace of mind knowing your protection is reliable.

M: QW-35-FL

© Copyright 2026 Manual.ly