Manual.ly Logo

Nolan N100-5 Manual

0.0 · 0 Ratings

PDF manual · 116 Pages

English

M: OA-GPT-54-NAN
page

/ 116

Loading...
69fd6a5e58c38ca0373746be471a62d62d3f page 16
22
N100-5
8 CHEEK PAD ASSEMBLY
8.1 Put the left cheek pad against the corresponding polystyrene inner cheek pad,
insert the chin strap into the passageway of the cheek pad padding and push it
near the three buttons on its back in order to fasten them to their seats (Fig.15).
8.2 Repeat these steps with the right cheek pad padding.
Warning: the buttons are not fastened until a click is heard. Check that the strap
comes out properly from the cheek pad padding.
8.3 Insert the chin strap band into the elastic loops on the roll neck (Fig.14).
WARNING
- If your helmet is equipped with the double D-Ring retention system, pull it
down as indicated in the attached double D-Ring label.
- Remove the inner comfort padding only when cleaning or washing is required.
- Never use the helmet if the inner comfort padding and the cheek pads have not
been correctly and completely tted.
- Delicately hand-wash in lukewarm water (max. 30° C) and neutral soap.
- Rinse with cold water and allow drying at room temperature, away from direct
sunlight.
- Never machine-wash the inner comfort padding.
- The inner polystyrene is an easily deformable material. It is apt to change or get
partially destroyed to help absorb shocks.
- Do not modify or alter the helmet’s internal polystyrene components in any way.
- Clean the inner polystyrene components with a damp cloth only and allow it to dry
at room temperature away from direct sunlight.
- Never use tools or equipment of any sort to carry out the steps described above.
9 ADJUSTING THE ROLL NECK STRETCH
The roll neck stretch can be adjusted to adapt to the different sizes or riding positions
of the riders.
9.1 To increase the roll neck stretch press the button of the left strap clip and simulta-
neously pull the elastic strap towards the rear part of the helmet (Fig. 23). Follow
the same steps on the other side of the helmet.
9.2 To decrease the roll neck stretch press the button of the left strap clip button and
simultaneously push the rear part of the roll neck to loosen the stretch of the elas-
tic strap (Fig. 24). Follow the same steps on the other side of the helmet.
9.3 Wear and fasten the helmet (see instructions above) and make sure that the roll
neck stretch in the riding position is satisfactory.
WARNING
After assembling or disassembling the roll neck and/or adjusting the stretch, wear
and fasten the helmet to check the correct adjustment of the chin strap (see at-
tached label), the correct positioning of the helmet on the head in the riding posi-
tion and the VPS functionality in all positioning notches.
3.4 Pull the roll neck towards the inside of the helmet to remove the two rear aps
of the roll neck from the seats on the shell sealing edge and remove it from the
helmet (Fig.20).
4 LINER DISASSEMBLY
4.1 Unhook the left rear ap of the liner from the shell rear edge by slightly puling the
comfort padding towards the inside of the helmet (Fig.21). Follow the same steps
for the right rear ap.
4.2 Hold the left front part of the liner and pull it upwards in order to remove the cor-
responding liner ap from the support xed to the polystyrene inner shell (Fig.22).
Then repeat the same steps for the central front and right ap.
4.3 Completely remove the liner from the helmet.
5 LINER ASSEMBLY
5.1 Insert the liner correctly into the helmet and t it well against the base.
5.2 Insert the central front ap of the liner into its seat on the support xed to the pol-
ystyrene inner shell and push it downwards until it is completely locked (Fig.22).
Then repeat the operation with the left and right aps making sure that the side
ends of the liner are placed between the external side frames and the polystyrene
inner shell.
Warning: Check the correct assembly of the liner front area by lifting and lowering
the VPS. These movements should be smooth. If this is not the case, repeat steps
4.2 and 5.2.
5.3 Insert the rear right and left aps of the liner into the relevant lower seats on the
shell edge (Fig.21). Push the aps until they are fully hooked onto the support.
6 ASSEMBLY OF THE ROLL NECK
6.1 Insert the rear right and left aps of the roll neck into the relevant upper seats on
the shell edge (Fig.20). Push the aps until they are fully hooked onto the support.
6.2 Insert the side ap into the seat on the lining of the left polystyrene cheek pad and
push it towards the inside of the helmet until it is completely locked to the support
(Fig.19).
6.3 Press the front button of the roll neck to fasten it to the corresponding seat on the
lining of the left polystyrene cheek pad (Fig.18).
6.4 Follow the same steps on the other side of the helmet.
7 ASSEMBLY OF THE INNER EXPANDING FOAM PADDING OF THE CHEEK PADS
7.1 Gently put the inner expanding foam padding inside the fabric lining of the left
cheek pad (Fig.17). Carefully spread out the padding while checking that there are
no wrinkles in the cheek pad fabric lining.
7.2 Insert the upper ap “B” and the lower ap “C” of the frame into their loops on the
back of the frame (Fig.16).
7.3 Fasten the three eyelets “A” of the rear frame of the left cheek pad next to the three
snap buttons (top, front and rear) on its back (Fig.16).
7.4 Repeat these steps with the right cheek pad padding.
INSTRUCTIONS FOR USE

Chat with your Nolan N100-5 manual using AI

Get instant AI answers from your Nolan N100-5 manual

Ask anything about the Nolan N100-5. Answers come from this manual, with the pages they are based on.

N100-5 Maintenance Schedule

After every use
Dry helmet and visor

Let the helmet dry in a ventilated place with the visor open after use. Keep away from heat sources.

As needed
Clean PINLOCK inner visor

Remove inner visor and clean gently with neutral liquid soap and damp cloth. Rinse under running water.

Periodically
Check PINLOCK stretch

Regularly check correct stretch to prevent movement and scratching of surfaces.

As needed
Replace scratched visor

If visor is damaged or deeply scratched reducing visibility, replace it immediately.

As needed
Wash comfort padding

Hand-wash only in lukewarm water (max 30 C) with neutral soap. Do not machine wash.

Show in the manual (page 22)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend N100-5?

Yes No

Frequently Asked Questions

A

It is a modular motorcycle helmet with a flip-up chin guard, a visor system, internal sun protection, and comfort-focused features for everyday road use.

Is this answer helpful?

A

The hi-visibility finish helps the rider stand out more easily in traffic, which can be especially helpful in busy urban areas, poor light, or mixed weather conditions.

Is this answer helpful?

A

The chin guard uses a two-step opening process with separate release and opening levers. This makes one-handed operation easier while helping reduce accidental opening.

Is this answer helpful?

A

Yes. The helmet supports a minimum-opening visor position for airflow, and it can also use a Pinlock inner visor to improve fog resistance in humid or cold conditions.

Is this answer helpful?

A

Yes. The cheek pads, roll neck, and liner are removable, which makes cleaning easier and helps riders maintain a better fit and fresher interior over time.

Is this answer helpful?

A

Yes. The helmet is prepared for N-Com communication systems, depending on the version. Some internal foam pieces may need to be removed during installation of compatible components.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Dual Action chin guard improves convenience and helps prevent accidental opening.
  • High-visibility design increases rider presence in traffic and low-light conditions.
  • VPS sun screen and optional Pinlock support better visibility in changing weather.
  • Removable padding and ventilation system improve comfort and easier maintenance.
VS

Disadvantages

  • Modular design can feel more complex than a simple full-face helmet.
  • Visor, VPS, and Pinlock parts need careful handling to avoid scratches or wear.
  • Protection depends on correct fit and proper fastening, so sizing matters a lot.
  • Some accessories and features may vary by version or require separate installation.
M: OA-GPT-54-NAN

Product Specification

Type

Modular Helmet

Features

Integrated Sun Visor

Weight

3.64 lbs

M: OA-GPT-54-NAN

Product Description

Nolan N100-5 Hi-Visibility (various sizes)

The Nolan N100-5 Hi-Visibility is built for riders who want a practical modular helmet with a strong focus on safety, visibility, and everyday comfort. Designed for motorcycle use, it combines a flip-up chin guard, a clear visor system, and a high-visibility finish that helps the rider stand out more easily in traffic. The overall feel is modern, functional, and made for real-world riding.

One of its standout features is the Dual Action chin guard system. This mechanism is designed to be opened with one hand while helping reduce the risk of accidental release. Riders can switch between a fully closed configuration for maximum protection and an open configuration for convenience at stops or in slower traffic. That flexibility makes the helmet appealing to commuters and touring riders alike.

Visibility is another major strength. The helmet supports a standard outer visor, a minimum-opening position for airflow and defogging, and an internal VPS sun screen for bright conditions. For riders who deal with changing weather, the optional Pinlock inner visor adds an extra layer of anti-fog support. Together, these elements help maintain a clearer view of the road when temperatures drop, humidity rises, or sunlight becomes harsh.

Comfort and adaptability also receive serious attention. The removable inner padding, cheek pads, and roll neck sections are made to improve fit and simplify cleaning. The ventilation system helps direct fresh air through the helmet, reduce heat buildup, and limit visor misting. In addition, the helmet is prepared for N-Com communication systems, making it a smart choice for riders who want to stay connected without compromising comfort.

Notes

  • Best suited to riders looking for a modular helmet with strong everyday versatility.
  • Available in various sizes, so fit should be checked carefully for stability and comfort.
  • Follow the cleaning and maintenance guidance to protect the visor, padding, and sun screen.
  • Regular inspection of straps, visor parts, and locking systems helps preserve performance over time.
  • High-visibility styling adds a practical safety advantage in busy traffic and low-light situations.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly