Noctua NA-SFMA1 Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Noctua NA-SFMA1 manual using AI
Get instant AI answers from your Noctua NA-SFMA1 manual
Ask anything about the Noctua NA-SFMA1. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend NA-SFMA1?
Yes NoFrequently Asked Questions
The kit includes two NA-FMA1 adapters and eight NA-AV4 anti-vibration mounts. These parts are used to attach compatible 120mm fans to radiators or other suitable mounting locations.
Is this answer helpful?
The installation process described for the kit is intended for 120mm fans. The NF-A12x25 is used as an example, while the same basic procedure applies to compatible models.
Is this answer helpful?
First pull the mounts through the adapter's fan mounting holes. Place the fan onto the adapter, pass the mount tips through the fan holes, and pull until latch number 5 is completely through the fan.
Is this answer helpful?
Pulling the next latch through can overstretch the anti-vibration mount. Using latch number 5 provides the intended secure fit without placing unnecessary strain on the fastening pin.
Is this answer helpful?
Use the screws supplied with the radiator when mounting the adapter to a water-cooling radiator. For other applications, standard fan screws or fasteners appropriate to the specific installation can be used.
Is this answer helpful?
Yes. The long ends may be trimmed with scissors after installation if desired. Keep in mind that cut mounts are much harder to remove and reinstall later.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Includes two NA-FMA1 adapters and eight NA-AV4 anti-vibration mounts for a complete mounting setup.
- Supports secure installation of compatible 120mm fans on radiators and other suitable applications.
- Anti-vibration mounts help reduce vibration transfer between the fan and mounting assembly.
- Installation uses a clear latch-based process and can be completed with radiator or standard fan screws.
- Mount ends can be trimmed for a cleaner appearance after the fan is secured.
Disadvantages
- The kit is intended for 120mm fan mounting, limiting its use with other fan sizes.
- Pulling mounts beyond latch number 5 can overstretch the fastening pins.
- Trimmed mount ends make later fan removal or reinstallation more difficult.
- Required mounting screws may depend on the radiator or specific application and are not listed as kit contents.
Product Specification
Type
Mounting kit
Compatibility
Noctua NF-A12x25, Noctua NF-F12, Noctua NF-P12, Noctua, NF-S12A
Set includes
8x vibration dampeners (NA-AV4), 2x frames (NA-FMA1)
Product Description
Noctua NA-SFMA1 Mounting Kit Manual: Flexible 120mm Fan Installation
The Noctua NA-SFMA1 Mounting Kit is designed to simplify the installation of 120mm fans on water-cooling radiators and other compatible applications. Built around Noctua's focus on quiet, dependable cooling hardware, this practical kit helps users combine secure fan placement with reduced vibration transfer. The Noctua NA-SFMA1 Mounting Kit Manual outlines a straightforward process that can be followed across compatible fan models, using the NF-A12x25 as an installation example.
What's Included
The kit contains two NA-FMA1 adapters and eight NA-AV4 anti-vibration mounts. Together, these components allow a 120mm fan to be attached to an adapter before the adapter is secured to a radiator or another suitable mounting surface. The adapter setup is useful when standard fan mounting positions do not provide the required fit or spacing.
The NA-AV4 mounts are made to hold the fan in place while helping limit vibration passed between the fan and the mounting assembly. This can support a cleaner, more refined cooling build, especially in systems where unwanted resonance and noise are a concern.
Installation Overview
Begin by pulling the anti-vibration mounts through the fan mounting holes on the adapter. Next, align the 120mm fan so the pointed ends of the mounts pass through the fan's mounting holes. Pull each mount until latch number 5 is fully drawn through the fan, creating a secure hold.
Care is important during this step. Only latch number 5 should be pulled through the hole. Pulling the next latch through may overstretch the mount and reduce its effectiveness. Once the fan is installed on the adapter, position the completed assembly on the radiator or intended application. Use the screws supplied with the radiator where applicable. For other installations, standard fan screws or application-specific fasteners may be appropriate.
Practical Finishing Notes
The long ends of the anti-vibration mounts can be trimmed with scissors after installation if they interfere with the build's appearance or cable routing. However, trimming makes future removal and reinstallation noticeably more difficult. Leaving them intact is generally the better choice for users who expect to adjust, clean, or replace their fans later.
Note: Confirm fan orientation before fastening the adapter. Planning airflow direction first can prevent unnecessary disassembly and help maintain an efficient cooling layout.
With its adapters and vibration-isolating mounts, the NA-SFMA1 offers a tidy solution for compatible 120mm fan installations where secure fitment and quieter operation matter.
Search for 67,706 Manuals online
Type-in Brand or Model