Manual.ly Logo

Noctua NA-IS1-14 Sx2 Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: gpt-5.6-terra
page

/ 2

Loading...
0e6a1d164d497b0395e65fef7ed8102b4538 page 1
NOCTUA NA-IS1-14 Sx2
INSTALLATION MANUAL
Scan this code to display
multilingual manuals on
your phone.
Designed to replace the fan’s stock NA-AVP1 anti-vibration
pads, the NA-IS1-14 are compatible with all current
square-frame Noctua 140x25mm fans and extremely
straightforward to install:
For case fan applications, either the supplied
self-tapping screws or the included NA-AV3 anti-vibration
mounts can be used to sandwich the spacer between the fan
and the case panel. For radiator mounting, both M3 and
UNC 6-32 screws are supplied.
Case fan installation with NA-AV3
1
Included mounting parts:
2 Case fan installation with screws
3 Radiator installation
2x NA-IS1-12 inlet spacers
8x NA-AV3
anti-vibrations mounts
8x NM-SFS4-BK
long fan screws
8x NM-SFS5-BK
radiator screws (M3)
8x NM-SFS6-BK
radiator screws (UNC)

Chat with your Noctua NA-IS1-14 Sx2 manual using AI

Get instant AI answers from your Noctua NA-IS1-14 Sx2 manual

Ask anything about the Noctua NA-IS1-14 Sx2. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend NA-IS1-14 Sx2?

Yes No

Frequently Asked Questions

A

The set includes spacers, eight NA-AV3 anti-vibration mounts, eight long fan screws, eight M3 radiator screws, and eight UNC 6-32 radiator screws. These parts support installation in a case or on a compatible radiator.

Is this answer helpful?

A

Yes. For a case installation, the spacers can be fixed between the fan and case panel using either the included self-tapping fan screws or the NA-AV3 anti-vibration mounts.

Is this answer helpful?

A

Yes. It includes radiator screws in both M3 and UNC 6-32 thread formats. Check the radiator manufacturer's specifications and use only the thread type intended for that radiator.

Is this answer helpful?

A

They use different thread standards. The instructions note that M3 screws have a smaller head, while UNC 6-32 screws have a larger head. They must not be substituted for each other.

Is this answer helpful?

A

NA-AV3 mounts can help reduce the transmission of fan vibration into the case panel. They offer an alternative mounting method for users who want to minimize chassis vibration and noise.

Is this answer helpful?

A

Verify the correct thread type, select the intended screws, and do not overtighten. Follow the radiator manufacturer's guidance, especially regarding screw depth, to avoid contact with internal fins or channels.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Includes mounting options for both PC cases and radiators.
  • Supplied M3 and UNC 6-32 screws support different radiator thread standards.
  • NA-AV3 anti-vibration mounts offer a vibration-isolating case mounting alternative.
  • Long fan screws are included for conventional case-fan installation.
  • Six-year warranty and direct Noctua support add long-term reassurance.
VS

Disadvantages

  • Radiator users must identify the correct M3 or UNC 6-32 thread before installation.
  • The two thread types are not interchangeable.
  • Incorrect screw selection or excessive screw depth may risk radiator damage.
  • Compatibility should be confirmed against the fan's frame size and mounting layout.
M: gpt-5.6-terra

Product Specification

Type

Spacer

M: gpt-5.6-terra

Product Description

Noctua NA-IS1-14 Sx2 Spacers for 140mm Fan - Read, Download & Print Free

The Noctua NA-IS1-14 Sx2 spacer set is designed to create a clean, carefully spaced installation between a compatible fan and a PC case panel or radiator. By replacing the fan's pre-installed anti-vibration pads, these spacers help provide a practical mounting solution for enthusiasts who want a more refined cooling setup without complicated hardware or modifications.

Flexible mounting for cases and radiators

The set includes mounting hardware for several common installation methods. For case-fan applications, users can secure the spacers with included self-tapping fan screws or NA-AV3 anti-vibration mounts. This gives builders a choice between a traditional screwed installation and a vibration-conscious mounting method that helps isolate the fan from the case panel.

For radiator installations, the package includes both M3 and UNC 6-32 radiator screws. These thread standards are commonly used by different radiator manufacturers, so having both options can simplify installation planning. It is important to check the radiator manufacturer's specifications before fitting the screws, as M3 and UNC 6-32 threads are not interchangeable.

Designed for straightforward assembly

Noctua positions the NA-IS1-14 Sx2 spacers as easy to install. The mounting approach keeps the spacer positioned between the fan and the mounting surface, allowing the fan to remain securely fixed while preserving the intended offset. This can be especially useful in cooling builds where clearance, airflow layout, or contact between components needs closer attention.

The included NA-AV3 anti-vibration mounts provide an alternative to metal fasteners for case installations. Their flexible design can help reduce the transfer of fan vibration into the chassis. Builders who prefer a firmer mechanical connection can use the supplied long fan screws instead.

Notes

  • Confirm the correct thread type before mounting on a radiator.
  • Use the appropriate screw length and avoid overtightening near radiator fins.
  • The supplied instructions reference compatibility with current Noctua square-frame fans; check fan dimensions and mounting compatibility before purchase.
  • Noctua provides a six-year warranty and direct support for the product.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly