Manual.ly Logo

nobile D 3830 Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: OA-GPT-5-NAN
page

/ 1

Loading...
a6d9dfbe0638c9afc4cba00102527459cd78 page 1
Montage
-
/
Betriebsanleitung
Niedervolt
-
Einbauleuchten
D 3830/D 3830 Q/D 3830 BF/C 3830/C 1830/C 3840/C 3860/C 392/C
410/C 411/N 5030/N 5048/N 5049/N 392/N 411
-
/
Operation Instruction
Instruction Low
-
voltage Recessed Downlights
D 3830/D 3830 Q/D 3830 BF/C 3830/C 1830/C 3840/C 3860/C
392/C 410/C 411/N 5030/N 5048/N 5049/N 392/N 411
Technische und gestalterische Änderungen im Zuge stetiger Produktentwicklungen vorbehalten.
Technical and design changes due to product developments are subject to change without prior notice.
nobilé AG – Wächtersbacher Str. 78 - 60386 Frankfurt/M. Germany - www.nobile.de rev. 0.0 – 06.05.2019
Technische und gestalterische Änderungen im Zuge stetiger Produktentwicklungen vorbehalten.
Technical and design changes due to product developments are subject to change without prior notice.
nobilé AG – Wächtersbacher Str. 78 - 60386 Frankfurt/M. Germany - www.nobile.de rev. 0.0 – 06.05.2019
Wir bedanken uns für den Kauf dieses nobilé-Produktes! Sie haben sich für ein qualitativ hochwertiges Produkt entschieden,
das mit größter Sorgfalt produziert und diversen Qualitätskontrollen unterzogen wurde.
Sicherheitshinweise
Um einen sicheren Betrieb des Produktes zu garantieren, beachten Sie bitte diese Anleitung. Bei Schäden, die durch
Nichtbeachtung der Anleitung verursacht werden, erlischt der Garantieanspruch.Die Montage und der elektrische Anschluss
des Produktes müssen fachgerecht nach den Installationsvorschriften DIN VDE 0100 von einer fachkundigen Person (z.B.
Elektroinstallateur) durchgeführt werden. Zudem sollten weitere landesspezifische und gesetzliche Bestimmungen und
Richtlinien beachtet werden. Vor jeglichen Arbeiten an der Beleuchtungsanlage, ist diese spannungsfrei zu schalten. Stellen
Sie vor der Inbetriebnahme sicher, dass von den nachgeschalteten Installationen oder angeschlossenen Verbrauchern
keine Lebensgefahr besteht. Vor dem Einbau ist die übliche Funktionsprüfung durchzuführen. Um Wartungsarbeiten zu
ermöglichen, sollte die Anlage auch nach der Installation zugängig sein. Die Leuchte ist nur mit Schutzkleinspannung (12V),
gemäß den bestehenden Normen und Richtlinien, zu betreiben. Bei der Installation der Leuchten in Schiffen, Booten und
Yachten sind die entsprechenden Richtlinien zu beachten. Der Abstand zwischen Leuchte und dem Transformator sollte
dabei mind. 200 mm betragen. Für den Anschluss an den Transformator sind nur hitzebeständige Leitungen zu verwenden.
Nach der Installation muss der Abstand zwischen benachbarten Flächen (z.B. Wänden, Deckenisolation usw.) und der
seitlichen Leuchtenbegrenzung mind. 50 mm betragen.
Technische Daten
Die Leuchten dürfen unter keinen Umständen durch wärmedämmende Abdeckungen oder ähnliche Werkstoffe
abgedeckt werden.
Ein Abstand vom höchsten Leuchtenpunkt zu anderen Materialien von mind. 140 mm ist einzuhalten oder
dieser ist durch einen Niedervolt-Abstandhalter bzw. einem Einbautopf vorgegeben. F-Zeichen gilt auch mit
einem LED Leuchtmittel.
Beim Einsatz von Lampen ohne Schutzabdeckung sind nur Niederdruck-Halogenlampen mit diesem Symbol
auf der Verpackung zu verwenden.
Dieses Symbol zeigt den Mindestabstand zwischen Strahler und der zu beleuchteten Fläche.
Entsorgung: Einbauleuchten sind aus Metall und können als solche entsorgt werden. Elektrisches Zubehör,
z.B. LM-Fassung, NV-Abstandshalter oder HV-Kit dürfen nicht über den Hausmüll entsorgt werden.
Anschluss/Montage
1. Erforderlichen Deckenausschnitt am Montageort vorsehen.
2. Transformator entsprechend Montage-/Betriebsanleitung anschließen.
3. Leuchtmittel (LM) einsetzen.
3.1 Bei Leuchten mit Sprengring, Sprengring zusammendrücken und entnehmen. LM einsetzen. Sprengring auf dem
äußeren Rand des LM auflegen, die Enden des Sprengringes müssen dabei nach unten zeigen.
3.2 Bei Leuchten mit patentierter Haltetechnik, Innenring durch einfachen Druck in Schwenkrichtung auf den Rand des
Innenrings lösen. LM einsetzen. Zum Einsetzen des Innenringes, müssen die gegenüberliegenden Führungsnuten in
den entsprechenden Metallfedern des Außenringes einrasten.
4. Transformator und Leuchte bzw. Lampenfassung miteinander verbinden und Transformator in der Zwischendecke
platzieren.
5. Haltefedern der Leuchte beidseitig nach oben drücken und Leuchte in die Einbauöffnung einsetzen.
Achtung Verbrennungsgefahr: Äußere Teile im Bereich der Leuchte und das Leuchtmittel erhitzen sich während des
Betriebes stark. Aus diesem Grund muss die Leuchte vor dem Auswechseln des Leuchtmittels ca. 10 Minuten ausgeschaltet
sein, um abkühlen zu können.
Congratulations on your purchase of this nobilé-product! You have decided on a high-quality product which is
manufactured with the utmost care and subject to several quality controls.
Safety notices
Safe use of the product is only guaranteed if each instruction is followed accordingly. In case of damage caused
by non-observance of these instructions the warranty expires. The installation and electrical connection must be done
by an authorized expert (e.g. electrician) in compliance with existing standards and local code. Prior to any installation
or maintenance work, mains must be disconnected. Before putting in operation, make sure any component of the entire
installation does not bear a risk of life. According to common practice, please perform a standard function test, before
installing. To make maintenance work possible, the lighting system should be accessible after installation. The downlight
may only be operated with a safety low-voltage (12V) in compliance with existing standards and guidelines. When
installing the downlight in ships, boats and yachts, please observe the corresponding guidelines. The minimum distance
between downlight and transformer should be at least 200 mm. Use only heat-resistant cables with suitable cross
sections for the connection to the transformer. After installation the body of the downlight must keep a minimum
distance of at least 50 mm at each edge with its surrounding surface (e.g. walls, ceilings, insulation etc.).
Specifications
The downlight must not be covered by insulation material or any similar material.
When installing downlights marked with this label the minimum distance of 140 mm from the highest point of
the luminaire to other material has to be observed. Or the distance is automatically specified by use of a
lowvoltage spacer or heat can. F-sign requirements are also met if downlight is fitted with an LED light
source.
When using lamps without protection cover, only low-voltage halogen lamps with this symbol must be used.
This pictogram indicates the minimum distance between the downlight and the surface to be lit.
Removal: recessed downlights consist of metal so they can be disposed as normal metal waste. But it is not
allowed to dispose electric accessories like LM socket, LV-Spacer or HV-Kit in the normal garbage.
Mounting Instruction
1. Make the required ceiling cut-out at the assembly site.
2. Connect transformer according to mounting-/operation instruction.
3. Insert lamp.
3.1 When installing downlights with snap ring, press the snap ring together and remove it. Plug lamp into the lamp holder
and reinsert the snap ring. The two ends of the snap ring must point downwards and the snap ring must be place on
the outer rim of the lamp.
3.2 When installing downlights with patented mechanics, release the inner ring by easily pressing on the inner ring in the
swelling direction. Plug lamp into the lamp holder and reinsert inner ring by clicking the opposite located guide slots
into the metal springs.
4. Connect transformer and downlight resp. lamp holder and put the transformer in place.
5. Push springs upwards and insert downlight into the ceiling cut-out.
Caution risk of burning: Outer parts of the downlight and lamp will become hot during operation. Therefore they must
be cooled down by switching off the lamp for about 10 minutes before changing.

Chat with your nobile D 3830 manual using AI

Get instant AI answers from your nobile D 3830 manual

Ask anything about the nobile D 3830. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend D 3830?

Yes No

Frequently Asked Questions

A

The D3830 is a low-voltage recessed downlight designed for 12V operation and must be used with a suitable transformer that meets applicable standards.

Is this answer helpful?

A

Electrical installation and connection should be performed by a qualified person (e.g., electrician) following DIN VDE 0100 and local regulations to ensure safety and maintain warranty coverage.

Is this answer helpful?

A

Maintain at least 50 mm clearance from adjacent surfaces at the fixture edges. Also observe a minimum distance of 140 mm from the highest point of the luminaire to other materials unless a low-voltage spacer or pot specifies otherwise.

Is this answer helpful?

A

Yes. The F-sign requirements are met with LED light sources. Ensure the chosen LED is compatible with a 12V transformer and does not violate heat or spacing rules.

Is this answer helpful?

A

The metal body can be disposed of or recycled as metal waste. Electrical accessories such as lamp sockets, LV spacers, or HV kits must not be disposed of in household garbage and should follow local electronic-waste disposal rules.

Is this answer helpful?

A

Disconnect mains power before any work. Allow the lamp and fixture to cool for about 10 minutes to avoid burns. Ensure the lighting system remains accessible for maintenance after installation.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact, recyclable metal construction built for durability and neat ceiling integration.
  • Compatible with low-voltage halogen and LED light sources (12V) when used with a suitable transformer.
  • Secure lamp retention options (snap ring or patented ring system) for easy service and reliable mounting.
  • Clear safety and installation requirements reduce risk when followed (distance, wiring, transformer placement).
  • Suitable for residential and commercial use; maritime installations possible with applicable rules.
VS

Disadvantages

  • Requires a separate 12V transformer and qualified electrician for compliant installation.
  • Strict clearance requirements (50 mm sides, 140 mm above) may limit placement in tight or insulated ceilings.
  • Electrical accessories must be disposed of separately from normal household waste.
  • Fixtures and lamps become hot; cooling time needed before maintenance.
  • Not suitable to be covered by insulation—may complicate energy-saving ceiling installations.
M: OA-GPT-5-NAN

Product Specification

Type

Recessed light, Spot, Downlight

Energy efficiency class suitable light source

A to G (A to G)

Old energy efficiency class suitable light source

A++ to E (A++ to E)

Integrated LEDs

no

Light source

no

Material

Steel, Brass

Design

round

Special features

adjustable

IP rating

IP20

Dimensions

3.46x1.22in (DxH)

M: OA-GPT-54-NAN

Product Description

nobilé D3830 Einbauleuchte Manual

The nobilé D3830 recessed downlight blends compact engineering with clear installation guidance for safe, reliable low-voltage lighting. Designed for 12V operation, the D3830 series emphasizes thermal management, safe mounting, and compatibility with a variety of housings and lamps. Its build quality reflects nobilé’s focus on precision manufacturing and quality control, making it suited for residential and commercial ceiling installations where discreet, effective lighting is required.

Product overview

The D3830 is a low-voltage recessed luminaire intended for installation in ceilings and similar surfaces. It accepts low-voltage halogen or LED light sources and must be used with a suitable transformer. The product features secure retention systems—either a snap ring or a patented inner/outer ring mechanism—ensuring the lamp is held firmly while allowing service access. Materials and construction prioritize metal components for durable mounting and recyclable disposal at end of life.

Key installation and safety points

Installation requires a precise ceiling cut-out and a qualified electrician to connect the transformer in accordance with applicable standards and local regulations. The luminaire must remain accessible for maintenance after installation. Maintain at least 50 mm clearance from adjacent surfaces around the fixture and observe a minimum 140 mm distance from the highest point of the luminaire to other materials unless a specified low-voltage spacer or pot defines otherwise. When installed aboard boats or yachts, adhere to maritime installation rules. Use heat-resistant wiring between transformer and lamp, and keep the transformer at least 200 mm from the fixture.

Practical considerations

The D3830 must not be covered by thermal insulation or similar materials. If lamps without protective covers are used, only low-voltage halogen types marked with the appropriate safety pictogram are permitted. The fixture and its electrical accessories (sockets, spacers, HV kits) have different disposal rules: metal parts can be recycled as metal waste, while electrical components must not be thrown into household garbage.

Notes

  • Allow the lamp and fixture to cool for about 10 minutes before servicing to avoid burns.
  • Follow DIN VDE 0100 and local codes for electrical work.
  • Use only approved, heat-resistant cables and suitable transformers.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly