Manual.ly Logo

Ninja 2-in-1 Auto-iQ BN750EU Manual

5.0 · 1 Ratings

PDF manual · 83 Pages

English

M: QW-35-FL
page

/ 83

Loading...
69208775502c16e5f10132dfd33ece04b172 page 18
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash all containers in
warm, soapy water with a soft cloth.
• Hand-Washing
Wash blade assemblies in warm, soapy
water using a dishwashing utensil with
a handle to avoid direct contact with
the blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
• Dishwasher
All attachments are dishwasher safe. It is
recommended that the lids, containers,
and blade assemblies be placed on the
top rack of the dishwasher ONLY. Ensure
the blade assemblies are removed from
their containers before placing in the
dishwasher. Exercise care when handling
blade assemblies.
• Motor Base
Turn o the unit and unplug the motor
base before cleaning. Wipe motor base
with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
STORING
Wrap the power cord around the cord
wrap on the back of the motor base.
Store the unit upright and store all blade
assemblies inside or attached to their
respective containers with their lids locked
in place.
DO NOT store blended or unblended
ingredients in the Single-Serve Cup
with the Pro Extractor Blades assembly
attached.
DO NOT stack items on top of the
containers. Store any remaining
attachments alongside the unit or in a
cabinet where they will not be damaged
or create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload the it. If the unit is overloaded,
the motor will be temporarily disabled.
Should this occur, follow the reset
procedure below.
1 Unplug the unit from the socket.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the container’s lid and blade
assembly. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjakitchen.eu
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power o and unplug unit before troubleshooting�
Unit doesn’t turn on�
• Make sure unit is plugged in.
Display will read “--” once connected to power�
• Place container on base and rotate it clockwise until container clicks into place. Press the
Power button to turn unit on, and the available programs will illuminate indicating the
unit is ready for use.
Display reads “Er”�
• If the display reads “Er”, unplug the unit from the socket and allow it to cool for
15 minutes. Remove the container’s lid and blade assembly and empty the contents
to ensure no ingredients are jamming the blade assembly.
Lid/Pro Extractor Blades Assembly is hard to install on the cup�
• Place the cup on a level surface. Carefully place the lid or Pro Extractor Blades Assembly
on the top of the cup and align the threads so the lid/Pro Extractor Blades Assembly sits
flat on the cup. Twist clockwise until you have a tight seal.
Unit doesn’t mix well; ingredients get stuck�
• Using the Auto-IQ® programs is the easiest way to achieve great results. The pulses
and pauses allow the ingredients to settle toward the blade assembly. If ingredients are
routinely getting stuck, adding some liquid will usually help.
• When filling the cup, start with fresh fruit or vegetables, then leafy greens or herbs. Next
add liquids or yoghurt, then seeds, powders, or nut butters. Finally, add ice or frozen
ingredients.
Motor base won’t stick to worktop or tabletop�
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces.
• Suction feet will not stick on some surfaces such as wood, tile, and non-polished finishes.
• DO NOT attempt to use unit when the motor base is stuck to a surface that is not secure
(cutting board, platter, plates, etc.).
Unit is dicult to remove from worktop for storage�
• Place your hands underneath both sides of the motor base and gently pull the unit up
and toward you.
Unit displays a blinking “��� ���” message�
• The unit can detect which container is on the motor base. You may be trying to use a
program that is not designed for the container you have installed. The programs will
light up, indicating which programs are available for each container.
The unit doesn’t create snow from solid ice�
• DO NOT use ice that has been sitting out or has started to melt. Use ice straight from
the freezer.
• Start with a few pulses and then use a continuous blending cycle.
The jug lid handle will not fold down�
• If not attached to the jug, the handle will not fold down. For storage, place the lid on the
jug and press down on the handle until it clicks into place.
• Start with a few pulses and then use a continuous blending cycle.
ENGLISH
47
ninjakitchen.eu
46
ninjakitchen.eu

Chat with your Ninja 2-in-1 Auto-iQ BN750EU manual using AI

Get instant AI answers from your Ninja 2-in-1 Auto-iQ BN750EU manual

Ask anything about the Ninja 2-in-1 Auto-iQ BN750EU. Answers come from this manual, with the pages they are based on.

2-in-1 Auto-iQ BN750EU Maintenance Schedule

Before each use
Inspect blade assemblies for damage

Check blades before every use. If a blade is bent or damaged, contact SharkNinja for replacement.

Show in the manual (page 19)
After each use
Clean containers and blades

Wash parts in warm soapy water by hand or on the top rack of a dishwasher. Wipe motor base with a damp cloth.

Show in the manual (page 24)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend 2-in-1 Auto-iQ BN750EU?

Yes No
0
User Pic

Malachi Sipes

6 months ago

How long does delivery take after payment is received?

0
User Pic

Manual.ly

6 months ago

Based on customer feedback, the mixer typically arrives within four days of payment confirmation. Delivery times may vary slightly depending on your location and shipping method.

M: QW-35-FL
M: QW-35-FL

Frequently Asked Questions

A

No, you should never blend hot liquids. Doing so can cause pressure buildup and steam release, which poses a burn risk. Allow liquids to cool before blending.

Is this answer helpful?

A

If the motor overheats, unplug the unit and let it cool for approximately 15 minutes. Ensure no ingredients are jamming the blades before plugging it back in and trying again.

Is this answer helpful?

A

Yes, the blade assemblies and containers are dishwasher safe. However, it is recommended to place them on the top rack and handle them with care due to their sharp edges.

Is this answer helpful?

A

Auto-iQ uses pre-set programs with specific pulse and pause patterns to optimize blending. Manual modes allow you to select continuous speeds (Low, Medium, High) for custom control over the texture.

Is this answer helpful?

A

No, you should not use extension cords with this appliance. Plug it directly into a wall outlet to ensure proper power supply and safety.

Is this answer helpful?

A

This product comes with a two-year limited guarantee from the date of purchase, covering defects in design, materials, and workmanship.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Versatile 2-in-1 design with both a large jug and a single-serve cup
  • Powerful 1200-watt motor effectively crushes ice and frozen ingredients
  • Auto-iQ programs automate blending for consistent results without guessing
  • All removable parts are BPA-free and dishwasher safe for easy cleaning
  • Includes a two-year limited guarantee for peace of mind
VS

Disadvantages

  • Blade assemblies are extremely sharp and require careful handling during removal
  • Motor base cannot be submerged in water and must be wiped clean only
  • Single-serve cup has a lower liquid capacity compared to standard blenders
  • Cannot process dry ingredients in the single-serve cup mode
  • Requires strict adherence to lid locking procedures to operate safely
M: QW-35-FL

Product Specification

Operation mode

Mains operation (1.2kW)

Color

black, silver

Speed settings

3 speed settings, pulse setting

Capacity

0.56 gal (mixing container)

Material

Stainless steel (blade)

Display

no

Features

Crushed ice function, smoothie function, 3 automatic programs, removable parts are dishwasher safe

Package contents

Mixing container/travel bottle (23.6 fl oz), lid with drinking opening

M: QW-35-FL

Product Description

NinjaKitchen 2-in-1 Mixer Auto-iQ Standmixer Review

The NinjaKitchen 2-in-1 Mixer Auto-iQ Standmixer represents a significant leap in kitchen versatility, combining the power of a full-size blender with the convenience of a personal single-serve cup. Designed for the modern home cook, this appliance features a robust 1200-watt motor capable of handling everything from crushing ice to blending tough greens. The system includes a large 2.1-liter Total Crushing jug and a 700 ml single-serve cup, allowing users to prepare family meals or individual smoothies without switching machines.

At the heart of this mixer is the intelligent Auto-iQ technology. This feature eliminates guesswork by offering pre-programmed cycles that combine unique pulsing, pausing, and blending patterns. Whether you are making frozen drinks, dips, or protein shakes, the machine automatically adjusts speed and timing to achieve the perfect consistency. Users can also switch between manual Low, Medium, and High settings for complete control over texture. The Pro Extractor Blades assembly ensures that even the toughest ingredients like seeds, skins, and stems are pulverized into smooth results.

Safety is a top priority with this unit. The design includes interlock mechanisms that prevent operation unless the lid and blade assemblies are correctly secured. The motor base features suction feet to keep the unit stable during high-speed blending. Cleaning is straightforward as all removable parts are dishwasher safe, though hand washing the sharp blades is recommended for safety. The appliance also comes with a two-year limited guarantee, reflecting the manufacturer's confidence in its durability and performance.

Notes

  • Always ensure the blade assembly is removed before emptying containers to avoid injury.
  • Do not blend hot liquids as pressure buildup can cause steam burns.
  • Keep the motor base dry and never submerge it in water.
M: QW-35-FL

© Copyright 2026 Manual.ly