Manual.ly Logo

Neomounts FPMA-D550NOTEBOOK Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-5-NAN
page

/ 4

Loading...
379bd7e545728236e9822b761c14f3ab436f page 1
1.Per garantire la sicurezza, leggere attentamente questo manuale prima di efefttuare l'installazione e seguire le istruzioni qui contenute. Conservare questo manuale in un luogo sicuro per riferimenti futuri.
2.Il produttore non deve essere ritenuto responsabile legalmente per qualsiasi danno all'apparecchio o lesione alla persona provocati da installazione non corretta o funzionamento diverso da quello riportato nel seguente
manuale.
3.Il montaggio a parete è stato ideato per una facile installazione e rimozione. Il produttore non sarà responsabile per danni all'apparecchio o per lesioni alla persona derivanti da fattori umani o eventi naturali, come tifoni
o terremoti.
4.Si consiglia di far installare la staffa per il montaggio solo da personale qualificato.
5.Per installare o rimuovere il prodotto sono necessarie almeno due persone per evitare rischi o la caduta di oggetti.
6.Controllare attentatmente l'area dove va effettuato il montaggio:
- Evitare luoghi soggetti a temperature alte, umidità o contatto con l'aqua.
- Non installare il prodotto accanto a uscite di ventilazione di aria condizionata o aree con polvere o fumi eccessivi.
- Installare solo su pareti verticali, evitare superfici inclinate.
- Non installare in luoghi soggetti a urti o vibrazioni.
- Non installare in luoghi soggetti a esposizione diretta alla luce, in quanto si potrebbe provocare faafticamento agli occhi durante la visualizzazione del pannello.
7.Mantenere spazio suficiente intorno al monitor per garantire una adeguata ventilazione.
8.Per garantire la sicurezza e per prevenire incidenti, è necessario, prima di eseguire l'installazione, controllare la struttara della parete, soffitto o pavimento e scegliere un posizionamento sicuro.
9.La parete, soffitto o pavimento deve essere abbastanza forte per sostenere almeno quattro volte il peso del monitor e della sfta fper il montaggio insieme. Il punto di montaggio deve essere in grado di sopportare
terremoti o urti forti.
10.Non modificare gli accessori o utilizzare parti rotte. Contattare il rivenditore per qualsiasi domanda.
11.Stringere tutte le viti (non applicare forza eccessiva per evitare la rottura delle viti o il danneggiamento della filettatura).
12.Fori e bulloni possono essere lasciati sulla parete, soffitto o pavimento una volta rimossi la stafaf e il monitor. Dopo un periodo prolungato di utilizzo, possono formarsi delle macchie.
13.Dato che il produttore non ha alcun modo di controllare il tipo di parete, soffitto o pavimento e l'installazione, la garanzia del prodotto coprirà esclusivamente il corpo della struttura per il montaggio. Il periodo di garanzia
del prodotto è di 5 anni.
14. Consultare il manual in lingua inglese per eventuali controversie sulle condizioni.
1. To ensure safety, please read this manual carefully before installation and foIlow the instructions. Store this manual in a secure place for future reference.
2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manuaI.
3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
4. It is recommended that the mount be installed by qualified personnel only.
5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.
6. Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
7. Maintain sufficient space around the display to ensure adequate ventilation.
8. To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
9. The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
10. Do not modify any accessories or use broken parts. Contact your dealer with any questions.
11. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
12. Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
13. Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
14. Please consult the English language manual for any dispute on conditions.
1. Afin d'assurer votre sécurité, nous vous prions de bien lire le manuel avant l'installation et de suivre attentivement les instructions qui y sont incluses. Conservez ce manuel dans un endroit sûr comme référence.
2. Le fabricant ne sera tenu légalement responsible d'aucun dommage à l'équipement ou de blessure corporelle causés par une mauvaise installataion ou une utilisation de l'équipement autre que celle décrite au sein
du présent manuel.
3. Le support de fixation murale est conçu de façon à faciliter l'installation et le déplacement. Le fabricant ne sera tenu responsable d'aucun dommage à l'équipement ou de blessure corporell découlant d'erreur humaine
ou de cas de force majeure, tels un tremblement de terre ou un typhon.
4. Il est recommandé de ne permettre qu'au personnel qualifié d'installer le support.
5. L'installation ou le déplacement du produit doit être fait par un minimum de deux personnes afin d'éviter les dangers potentiels causés par une chute.
6. Nous vous prions d'inspecter soigneusement l'emplacement où le support sera installé:
- Évitez les endroits soumis à des températures élevées, à l'humidité ou au contact de l'eau.
- N'installez pas le produit près de bouches d'air climatisé ou dans des endroits avec beaucoup de poussière ou de vapeurs toxiques.
- N'installez que sur des murs verticaux et évitez les surfaces inclinées.
- N'installez pas dans de endroits avec des chocs ou des vibrations.
- N'installez pas dans endroits exposés à des lumières fortes, cela pourrait causer la fatigue visuelle lors de l'observation du panneau d'affichage.
7. Laissez un espace sufisant autour de l'écran pour une ventilation adéquate.
8. Afin d'assurer la sécurité et la prévention des accidents, il est impératif de vérifier la structure du mur, du plafond ou du sol et de choisir un endroit solide avant de l'installer.
9. Le mur, le plafond ou le sol doit être assez suffisamment solide pour soutenir un poids quatre fois supérieur à celui du poids combiné de l'écran et du support ensemble. L'emplacement du montage doit pouvoir survivre
à un tremblement de terre ou autre choc intense.
10. Ne modifiez aucun accessoire et n'utilisez pas de pièces cassées. Contactez votre revendeur pour toute question.
11. Resserrez toutes les vis (n'utilisez pas de force excessive pour éviter d'abîmer les vis ou le filetage).
12. Les trous de perçage et les écrous resteront dans le mur lorsque vous déplacez l'écran et le support. Des taches peuvent apparaître après une longue utilisation.
13. Puisque le fabricant ne peut en aucun cas contrôler le type de mur et la qualité de l'installation du support, la garantie du produit ne couvre que le support de fixation murale. La période de garantie du produit est de 5 ans.
14. Veuillez consulter le manuel en anglais pour tout litige sur les conditions.
1. Lesen Sie bitte vor der Installation das Handbuch sorgfältig durch und befolgen Sie alle Anweisungen, um die Sicherheit zu gewähren. Bewahren Sie das Handbuch auf, damit Sie jederzeit darin nachlesen können.
2. Der Hersteller haftet für keine Geräte- oder Personenschäden, die durch unsachgemäße Installation oder Bedienung, die nicht in diesem Handbuch beschrieben ist, entstanden sind.
3. Die Montage ist für eine einfache Installation und Demontage ausgelegt. Der Hersteller haftet nicht für Geräte- order Personenschäden, die durch menschliche Faktoren oder höhere Gewalt wie z.B. Erdbeben oder
Orkan entstanden sind.
4. Wir empfehlen Ihnen die Halterung nur von einem qualifizierten Techniker installieren zu lassen.
5. Die Installation oder Demontage des Produkts muss von mindestens zwei Personen ausgeführt werden, um zu vermeiden, daß Gegenstände herunterfallen.
6. Bitte prüfen Sie die Stelle, wo die Halterung installiert werden soll, sorgfältig:
- Vermeiden Sie Stellen mit hohen Temperaturen oder Feuchtigkeit bzw. Stellen, die mit Wasser in Kontakt kommen können.
- Installieren Sie das Produkt nicht in der Nähe von Klimaanlagenöffnungen oder an einer Stelle, wo es übermäßig Staub und Rauch gibt.
- Montieren Sie das Produkt nur an eine vertikale Wand. Vermeiden Sie schräge Oberfläche.
- Installieren Sie das Produkt nicht an einer Stelle, an der es Erschütterungen oder Schwingungen ausgesetzt ist.
- Installieren Sie das Produkt nicht an einer Stelle mit direkter Sonneneinstrahlung bzw. starkem Licht. Dies fördert beim Anschauen der Bildschimanzeige das Ermüden der Augen.
7. Halten Sie um das Anzeigegerät ausreichend Freiraum, um eine gute Belüftung zu gewähren.
8. Um die Sicherheit zu gewähren und Unfälle zu vermeiden, ist es notwendig, vor der Installation die Wand-, Decken- oder Bodenstruktur zu überprüfen bzw. eine sichere Stelle auszuwählen.
9. Die Wand, Decke oder der Boden muss stark genug sein, um ein Gewicht von mindestens dem Vierfachen des Gesamtgewichts des Anzeigegerätes und des Montagesets zu tragen. Der Montageort
muss in der Lage sein, Erdbeben oder sonstige starke Erschütterungen standzuhalten.
10. Modifizieren Sie keine Zubehörteile. Verwenden Sie keine beschädigten Teile. Wenden Sie sich an Ihren Händler, wenn Sie Fragen haben.
11. Ziehen Sie alle Schrauben fest. (Wenden Sie nicht zu viel Kraft an, um ein Brechen der Schraube oder Beschädigen des Gewindes zu vermeiden.)
12. Die Bohrungen und die Schrauben bleiben an der Wand, Decke oder am Boden sichtbar, wenn das Anzeigegerät und das Montageset entfernt wird. Nach längerem Gebrauch kann ein Fleck bleiben.
13. Der Hersteller hat keinen Einfluss auf die Wand-, Decken- oder Bodenart und die Installation der Halterung. Deshalb deckt die Garantie des Produkts nur die Halterung selbst ab. Die Garantie des Produkts gilt für 5 Jahre.
14. Bitte ziehen Sie die englische Version des Handbuchs zu Rate, falls es Unstimmigkeiten hinsichtlich der Bedingungen gibt.
1. Para garantizar su seguridad, lea este manual cuidadosamente antes de la instalación y siga las instrucciones. Conserve este manual en un lugar seguro para futuras consultas.
2. El fabricante no será legalmente responsible de ningún daño producido sobre el equipo o lesión personal causada por una instalación o uso no mencionado explícitamente en este manual.
3. El soporte está diseñado para una fácil instalación y extracción. El fabricante no será responsable por daños al equipo o lesiones personales que surjan de factores humanos o actos de la naturaleza, como terremotos
o tifones.
4. Se recomienda que el soporte sea instalado solo por personal cualificado.
5. Para evitar que se caiga el producto, la instalación o retirada deberá ser realizada por al menos dos personas.
6. Inspeccione detenidamente el área donde se instalará el soporte:
- Evite los lugares sometidos a altas temperaturas, humedad o contacto con el agua.
- No instale el producto cerca de ventiladores de aire acondicionado o áreas con exceso de polvo y humos.
- Instalar solo en paredes verticales y evitar superficies inclinadas.
- No instale en lugares sujetos a golpes o vibraciones.
- No instale en lugares sometidos a la exposición directa a la luz brillante, ya que puede causar fatiga ocular al ver el panel de la pantalla
7. Mantenga suficiente espacio alrededor de la pantalla para asegurar una ventilación adecuada.
8. Para garantizar una instalación segura, primero verifique la estructura de la pared, el techo o el piso y seleccione una ubicación de montaje segura.
9. La pared, el techo o el piso deben ser lo suficientemente fuertes para sostener un peso de al menos cuatro veces la pantalla y el montaje combinados. La ubicación de montaje debe ser capaz de resistir un terremoto
o otro golpe fuerte.
10. No modifique ningún accesorio ni utilice componentes deteriorados. Póngase en contacto con su distribuidor si tiene alguna duda.
11. Apriete todos los tornillos (no ejerza demasiada fuerza para evitar que se roma el tornillo o se dañe la rosca).
12. Mantenga los orificios y los pernos en la pared, techo o suelo después de retirar la pantalla y el soporte. Podrían quedar manchas después de un uso prolongado.
13. Dado que el fabricante no tiene forma de controlar el tipo de pared, techo o piso y la instalación del soporte, la garantía del producto solo cubrirá el cuerpo del soporte. El periodo de garantía del producto es de 5 años.
14. Consulte el manual en inglés si tiene alguna duda acerca de las condiciones.
FPMA-D550NOTEBOOK
Flat screen desk mount Flatscreen bureausteun
Flachbild TV/Monitor Tischhalterung Support bureau pour écran plat
Supporto da scrivania per schermo piatto Soporte de mesa para pantalla plana
Suporte de mesa para ecrãs plano Fladskærm bordbeslag
Näyttöjen pöytäteline Skrivbordsfäste till platta skärmar
Flatskjerm skrivebordfeste Uchwyt biurkowy do monitora

Chat with your Neomounts FPMA-D550NOTEBOOK manual using AI

Get instant AI answers from your Neomounts FPMA-D550NOTEBOOK manual

Ask anything about the Neomounts FPMA-D550NOTEBOOK. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend FPMA-D550NOTEBOOK?

Yes No

Frequently Asked Questions

A

The mount supports laptops up to 4.5 kg and flat displays up to 8 kg, and is compatible with VESA patterns 75x75 mm and 100x100 mm.

Is this answer helpful?

A

You can mount the FPMA-D550 using a desk-edge clamp or a grommet-through-desk installation, with included hardware and spacers for varying desk thicknesses.

Is this answer helpful?

A

Install on a strong, vertical surface capable of supporting at least four times the combined weight; avoid humid, dusty, vibrating, or brightly lit areas; use two people for installation and avoid over-tightening screws.

Is this answer helpful?

A

The warranty covers only the body of the mount for five years. It does not cover damage resulting from improper installation, unsuitable mounting surfaces, or modified/broken parts.

Is this answer helpful?

A

Yes. The arm allows tilt and swivel adjustments and cable routing to position the laptop or display for comfortable viewing while keeping cables organized.

Is this answer helpful?

A

Do not install the mount in locations with high temperatures, high humidity, direct water contact, excessive dust or fumes, frequent shocks, or direct bright light to prevent damage and eye fatigue.

Is this answer helpful?

A

Do not modify or use damaged parts. Contact your dealer or supplier for replacement parts or installation assistance to ensure safety and preserve warranty coverage.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Supports laptops up to 4.5 kg and displays up to 8 kg with VESA 75x75 and 100x100 compatibility.
  • Offers both desk clamp and grommet mounting for flexible installation on various desks.
  • Adjustable arm provides tilt and swivel to optimize ergonomics and reduce glare.
  • Includes multiple fasteners and spacers to accommodate different desk thicknesses and devices.
  • Structured safety guidance and a five-year warranty on the mount body.
VS

Disadvantages

  • Requires a mounting surface strong enough to bear four times the combined weight of display and mount.
  • Installation may require two people and ideally qualified personnel, adding complexity.
  • Warranty excludes damage from incorrect installation or unsuitable wall/desk types.
  • Holes, bolts, or stains may remain on desk after removal of mount and display.
  • Not recommended for high-humidity, dusty, vibrating, or direct-bright-light environments.
M: OA-GPT-5-NAN

Product Specification

Type

Desk mount

Number of monitors

1

Screen size

10-27"

Mobility

tiltable (-65°, +65°), swiveling (360°), extendable, height adjustable

Max. load capacity

22.05 lb

VESA

75x75, 100x100

Special features

Notebook holder, Cable management

Color

black

M: OA-GPT-54-NAN

Product Description

Neomounts FPMA-D550 NOTEBOOK Manual

The Neomounts FPMA-D550 NOTEBOOK is a sturdy, versatile desk mount designed to elevate laptops and flat displays for improved ergonomics and workspace organization. Built to support up to 4.5 kg for laptops and 8 kg for displays, this mount accommodates VESA patterns 75x75 and 100x100 mm. Its design emphasizes safety, stability, and ease of installation, with components such as desk clamp and grommet mounting options, adjustable arms, and cable routing features to keep desks tidy.

With tool-assisted assembly and clear fastening points, the FPMA-D550 NOTEBOOK offers flexible installation: clamp-to-edge or grommet-through-desk mounting. The package includes multiple fasteners and spacers to match different laptop bases and desk thicknesses. Once mounted, the arm provides tilt and swivel adjustment so users can position screens to reduce glare and eye strain. The structure is engineered to position the device securely while allowing quick removal when needed.

Safety and reliability are highlighted throughout the product guidance: installations should be performed by at least two people and preferably qualified personnel. The mount requires a strong mounting surface capable of supporting at least four times the combined weight of the display and mount. The manual advises avoiding installation in high humidity, near vents, dusty or vibrating environments, or direct bright light that can cause eye fatigue.

Durability considerations include tightening screws without over-torquing, avoiding modified or damaged parts, and understanding that holes or bolts may remain in the desk after removal. The manufacturer limits warranty coverage to the mount body and specifies a five-year warranty period. For disputes or clarifications, consult the English-language instructions provided with the product.

Overall, the FPMA-D550 NOTEBOOK is intended for users seeking an adjustable, secure laptop/display mounting solution with professional-grade safety recommendations and multi-language assembly guidance.

Notes

  • Supports laptop up to 4.5 kg and displays up to 8 kg.
  • Compatible with VESA 75x75 and 100x100 mm.
  • Two mounting methods: desk clamp or grommet.
  • Warranty covers mount body for 5 years; proper installation required.
  • Avoid high humidity, vibration, and direct bright light installation locations.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly