MXR Dyna Comp Manual
PDF manual · 4 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your MXR Dyna Comp manual using AI
Get instant AI answers from your MXR Dyna Comp manual
Ask anything about the MXR Dyna Comp. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Dyna Comp?
Yes NoFrequently Asked Questions
The Clean knob blends unaffected (dry) bass signal back with the compressed output, enabling parallel compression. Turning it up increases the dry signal to retain attack, clarity, and low-end presence while still benefiting from compression.
Is this answer helpful?
No. The M282 Dyna Comp Bass Compressor requires a 9 V DC power supply such as the Dunlop ECB003, DC Brick, Iso-Brick, or Mini Iso-Brick. It cannot be powered by a battery.
Is this answer helpful?
The Attack switch toggles between slow and fast attack times. Slow attack yields smoother leveling and preserves transients; fast attack clamps down quicker for tighter, more controlled transients. A red LED indicates the fast-attack mode.
Is this answer helpful?
The Tone knob adjusts midrange centered at 1 kHz by +/-7 dB. Turning it clockwise boosts mids to help the bass cut through a mix; counterclockwise reduces mids for a rounder, more scooped tone.
Is this answer helpful?
Yes. With low noise, modest current draw, and intuitive controls, the Dyna Comp Bass Compressor is well-suited for both live and studio applications, offering consistent, musical compression and improved sustain.
Is this answer helpful?
The pedal has an input impedance of 600 kΩ and an output impedance of 25 kΩ, ensuring proper interfacing with most basses and amplifier inputs without significant loading issues.
Is this answer helpful?
Maximum compression is approximately 36 dB, allowing heavy leveling when desired. Use Sensitivity and Clean controls to dial in subtle to aggressive compression while preserving musicality.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Classic MXR compression voiced specifically for bass preserves low-end while adding sustain.
- Clean blend knob allows parallel mixing to retain articulation and punch.
- Simple, intuitive controls: Output, Clean, Sensitivity, Attack switch, and Tone.
- Low noise floor (~-100 dBV) and modest current draw (11 mA) suitable for pedalboards.
- Robust tonal shaping with a 1 kHz Tone control +/-7 dB to help bass cut through mixes.
Disadvantages
- Cannot be battery powered; requires an external 9V DC adapter.
- Limited advanced routing or sidechain features compared to modern multi-band compressors.
- Tone control is centered only at 1 kHz, which may limit broader EQ shaping.
- Maximum compression (36 dB) can be heavy-handed if not carefully adjusted.
- No onboard presets or programmable options for instant recall in varied setups.
Product Specification
Type
Effects Pedal
Effect
Compressor
Product Description
MXR Dyna Comp Bass Compressor — Classic Compression, Tailored for Bass
The MXR Dyna Comp Bass Compressor refines an iconic compression character specifically for bassists. Built around the same classic circuitry that shaped countless records, this version is voiced and tuned to preserve low-end punch while smoothing dynamics. It provides a familiar, musical compression that enhances sustain and tightens grooves without stripping tone.
Key Features and Operation
Start with straightforward controls: Output for overall level, Clean to blend unaffected signal, Sensitivity for sustain and compression depth, Attack switch for slow or fast response, and Tone to sculpt midrange around 1 kHz. The Clean knob lets you parallel-blend dry bass back into the compressed signal, retaining articulation and low-frequency clarity. Sensitivity controls how aggressively the compressor reacts, extending sustain when turned up. The Attack switch offers two distinct response styles—slow for natural leveling, fast for snappier transient control. Tone adjusts midrange presence to cut through mixes or sit back for a warmer, rounded sound.
Powering the pedal requires a 9V DC supply (Dunlop ECB003 or compatible bricks); it does not accept battery power. The rugged footswitch toggles the effect on with a blue LED indicator, while the fast-attack mode is shown by a red LED.
Sound and Use Cases
Use the Dyna Comp Bass Compressor to add sustain for soloing, smooth uneven picking, tighten slap tones, or lock in consistent foundation for the band. It excels in studio and live contexts where reliable, musical compression is needed without excessive noise. Specs like 600 kΩ input impedance and low current draw make it pedalboard-friendly, and a noise floor around -100 dBV ensures quiet operation.
Notes
- Not battery powered; requires a 9V DC adapter such as the Dunlop ECB003 or an Iso-Brick.
- Tone control centers at 1 kHz with +/-7 dB range.
- Max compression reaches about 36 dB for heavy leveling when pushed.
Search for 67,706 Manuals online
Type-in Brand or Model