Manual.ly Logo

MXR CSP037 Raijin Drive Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: QW-35-FL
page

/ 4

Loading...
85777a035fed4d078f1d93659fc22f6df677 page 1
Raijin Drive
Designed in conjunction with Shin Suzuki, Japan’s
most celebrated amp and pedal designer, this pedal
reinvents two iconic Japanese stompboxes—an
overdrive and a distortion—with greater tonal range
and usability so that those beloved sounds can keep
up with the modern tone chase. The overdrive signal
is smooth, fat, and wide open while the distortion
signal packs an aggressive, harmonically rich punch
with just enough gain to get good and heavy.
CSP037
jimdunlop.com/csp037
™

Chat with your MXR CSP037 Raijin Drive manual using AI

Get instant AI answers from your MXR CSP037 Raijin Drive manual

Ask anything about the MXR CSP037 Raijin Drive. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend CSP037 Raijin Drive?

Yes No

Frequently Asked Questions

A

The DRIVE SELECT switch toggles between distortion and overdrive signals. Flip it up for distortion or down for overdrive, allowing rapid switching between aggressive punch and smooth tone.

Is this answer helpful?

A

The pedal is powered by a nine volt battery, the Dunlop ECB003 adapter, or DC Brick, Iso-Brick, and Mini Iso-Brick power supplies. Remove bottom plate to install battery.

Is this answer helpful?

A

The input impedance is 120 kOhm at 1KHz. This high impedance helps preserve the tonal characteristics of your guitar signal.

Is this answer helpful?

A

Yes, the efficient current draw of seven milliamps helps when using multiple pedals on a board without overloading the power supply.

Is this answer helpful?

A

Connect a cable from your guitar to the CSP037 INPUT jack. Run another cable from the OUTPUT jack to your amplifier to begin.

Is this answer helpful?

A

Rotate the Tone knob clockwise for a brighter sound or counterclockwise for a warmer sound. Start with all knobs at 12 oclock for neutral settings.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Versatile drive tones with distinct overdrive and distortion modes for different genres.
  • Designed by Shin Suzuki ensuring high quality and Japanese design heritage.
  • Straightforward control layout with five external knobs and a toggle switch.
  • Low noise floor provides clarity even when using high gain settings.
  • Efficient power draw allows use alongside other pedals without draining power.
VS

Disadvantages

  • Requires specific power supply options like Iso-Brick for optimal performance.
  • Does not mention true bypass which may affect tone when effect is off.
  • No expression pedal inputs available for dynamic control of parameters.
  • Fixed impedance may not match all vintage guitar setups perfectly.
  • Battery compartment access requires removing the bottom plate.
M: QW-35-FL

Product Specification

Type

Effect Pedal

Effect

Overdrive

M: QW-35-FL

Product Description

Unlocking Japanese Tone with the MXR CSP037 Raijin Drive

The MXR CSP037 Raijin Drive represents a significant collaboration between Dunlop and Shin Suzuki. It is designed for guitarists seeking vintage-inspired sounds without sacrificing modern reliability. This instrument reinvents two iconic Japanese stompboxes into a single unit. Players can choose between an overdrive and a distortion signal. This choice allows for greater tonal range and usability than previous generations. The overdrive signal is smooth, fat, and wide open. This characteristic makes it perfect for blues or classic rock applications. Conversely, the distortion signal packs an aggressive, harmonically rich punch. It offers just enough gain to get good and heavy for metal or hard rock styles.

While reviewing the MXR CSP037 Raijin Drive Manual, users find the interface straightforward and intuitive. There are five external controls to manage the sound. The Level knob adjusts the overall volume of the effect. The Tone knob adjusts the EQ of the effect to fit your mix. The Drive knob adjusts the amount of overdrive or distortion. A dedicated switch toggles between the distortion and overdrive signals. A footswitch activates the effect, signaled by a blue LED. The input impedance is high at 120 kOhm to preserve tone.

Using the Raijin Drive is essential for the modern tone chase. It keeps beloved sounds up to speed with current gear needs. The noise floor is low, ensuring clarity even with high gain. Specifications show a current draw of only seven milliamps. This efficiency helps when using multiple pedals on a board. Whether you are recording in a studio or playing live, this pedal delivers. Guitarists looking to expand their drive collection will appreciate the flexibility offered here.

You can start with all knobs set to 12 o'clock. Turn the effect on by depressing the footswitch. Rotate the Level knob clockwise to increase overall volume of effect or counterclockwise to decrease it. Rotate Tone knob clockwise for a brighter sound or counterclockwise for a warmer sound. Rotate Drive knob clockwise to increase amount of distortion or overdrive or counterclockwise to decrease it. Flip Drive Select switch up for distortion or down for overdrive.

The pedal is powered by one nine volt battery or the Dunlop ECB003 adapter. You can also use DC Brick, Iso-Brick, or Mini Iso-Brick power supplies. Remove bottom plate to install the battery if needed.

Notes

Ensure you are using a regulated power supply for best results. The Max Input Level is 5.1 VPP. Noise floor varies between distortion and OD settings. Keep connections tight to avoid signal loss.

M: QW-35-FL

© Copyright 2026 Manual.ly