Manual.ly Logo

MSW MSW-CPI600MS Manual

0.0 · 0 Ratings

PDF manual · 19 Pages

English

M: OA-GPT-5-NAN
page

/ 19

Loading...
4584953218e2ff8cb41662b754b9704d60e7 page 5
8
The product satises the relevant safety
standards.
Read the instructions before use.
The product must be recycled.
Class II protection device with double insulation.
Whenever "device" or "product" are used in the warnings
and instructions, it shall mean car power inverter. Do not
use in very humid environments or in the direct vicinity
of water tanks. Prevent the device from getting wet. Risk
of electric shock! Do not cover air inlets / outlets. When
in use, do not put your hands or other items inside the
device!
3.1 Electrical safety
a) Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
b) It is forbidden to connect both inputs and outputs of
the power inverter to energy sources from the power
grid.
c) Be aware that there is voltage in the power supply
inverter connected to the power source. Even if the
switch is in the O position, there still is a risk of
electric shock.
d) In order to connect the receiving device to the car
power inverter, it is necessary to use the original,
unmodied plugs that match a given socket.
Original plugs and matching sockets reduce the risk
of electric shock.
e) Always make sure that the parameters of the
receiving device correspond to the parameters
generated by the car power inverter.
3.2 Safety at the workplace
a) Do not use the device in an explosion hazard zone,
for example in the presence of ammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
b) Upon discovering damage or irregular operation,
immediately switch the device o and report it to
a supervisor without delay.
c) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e) If a re starts, use solely powder or carbon dioxide
(CO
2
) re extinguishers suitable for use on live
devices to put it out.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. Taking
into account technological progress and noise reduction
opportunities, the device was designed to reduce noise
emission risks to the minimum.
Legend
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
dier from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. Usage safety
Electrical equipment:
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, re
and/or serious injury or even death.
REMEMBER! When using the device, protect children
and other bystanders.
3.3 Personal safety
a) Do not use the device when tired, ill or under the
inuence of alcohol, narcotics or medication which
can signicantly impair the ability to operate the
device.
b) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
3.4 Safe device use
a) Do not overload the device. Use appropriate tools for
the given task. A correctly selected device will perform
the task for which it was designed better and in a safer
manner.
b) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
o). Devices which cannot be switched on and o
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c) Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d) Keep the device out of the reach of children.
e) Device repair or maintenance should be carried out by
qualied persons, only using original spare parts. This
will ensure safe use.
f) To ensure the operational integrity of the device, do
not remove factory tted guards and do not loosen
any screws
g) Provide the space around the device for a width of
min. 5cm.
h) The device must be protected against water soaking
and adverse weather conditions.
i) During intensive use the device housing may
signicantly heat up.
j) Do not cover the device with any fabrics or items.
k) Do not use damaged or faulty batteries as a power
supply source.
l) Never leave the device connected to a power supply
when not in use!
4. Use guidelines
The car power inverter is a device designed to change
a 12V DC voltage to 230 V alternating voltage. It will be
used on campsites, boats, etc., where there is no electricity
supplied from the grid.
The user is liable for any damage resulting from non-
intended use of the device.
+
–
+
–
AC Output
9
4.1 Device description
MSW-CPI-380MS, MSW-CPI-300MS, MSW-CPI-300PSL,
MSW-CPI600MS, MSW-CPI800MS
1. On/O switch
2. Diode informing about the error – activation of the
protection
3. Diode informing about the active 230V output
4. Diode informing about the active USB output
5. USB port
6. 230V socket
7. Ventilation holes
• Do not use excessive force when tightening the
wires to the terminals on the battery and the power
inverter, as this may damage the equipment.
• Some models have an adapter for connecting the
power inverter to the cigarette lighter as a 12VDC
voltage source. In case of using the adapter, it is
necessary to connect the wires to the power inverter,
keeping compatibility of the marking on the cable
with the marking on the terminal. And then insert the
plug into the cigarette lighter socket.
• Always make sure that the power of the device being
connected does not exceed the car inverter power
value.
• Connect the receiving device powered by 230V AC
voltage. Turn on the voltage on the 230V socket by
switching the On / O switch to the On "I" position.
When the power supply to the socket is turned on,
the cooling fan of the device will be started.
Connection diagram:
• The green LED (3) informs that the device is working
properly, while the active LED (2) informs that one of
the device protections has been triggered.
• The USB port is active when the power inverter
is connected to the power supply and the On /
O switch is in the O "O" position. For example,
a mobile phone can be charged using the port.
Protections
The device has the following protections:
• Overload protection
• Overheating protection released when the device
temperature is above ca. 65°C
• Protection against too low voltage, i.e. protection of
the battery against excessive discharging or before
connecting the device to the lighter socket with too
low voltage.
• Protection against too high voltage
• Short-circuit protection at the output of the device.
Usage tips
• In the case of having to connect the power inverter
to the battery installed in the car, it is recommended
to start the car engine and only then to connect the
power inverter. It is not recommended to connect
the inverter to a switched o car engine, as this may
cause excessive battery discharging preventing the
car from being able to start.
• It is forbidden to use the power inverter connected
by wires to the car battery, if the car is moving. In
case there is car movement, it is only possible to use
the power inverter connection with the adapter for
the cigarette lighter socket.
• Do not leave the power inverter under the car hood.
• It is forbidden to put the power inverter on the
battery.
• The device power is between 12 and 13V for the
inverter voltage supply.
4.2 Preparing for use
The device must be unpacked and checked for any damage
it may have experienced during transport. The work surface
where the device will be located must be suitable for the
size of the appliance, please refer to the measurements. The
work surface must be levelled, dry, heat-resistant and at
a tting height from the ground to enable a proper use of
the device. The ambient temperature should be between 0
and 40°C. The battery to which the device will be connected
should be functional, charged and have data in accordance
with the input parameters of the power inverter.
4.3 Device use
Operating
• Make sure that the On / O switch is in the O „O"
position.
• Connect the connected wires to the appropriate
poles of the power inverter "+" and "-”.
• Connect the wires to the battery with the voltage
compatible with the input voltage of the car power
inverter.
• Pay special attention to connect the cables correctly,
i.e. so that the cable to both the converter and the
battery will be connected to the same pole. Change
of the poles may damage the car power inverter.
MSW-CPI-600PS, MSW-CPI-1000PS, MSW-CPI1000MS
MSW-CPI1500PS
6
1
2
4
5
3
7
1
2
3
4
5
7
6
1
2 3 4
5
7
6
Rev. 10.07.2018
Rev. 10.07.2018

Chat with your MSW MSW-CPI600MS manual using AI

Get instant AI answers from your MSW MSW-CPI600MS manual

Ask anything about the MSW MSW-CPI600MS. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend MSW-CPI600MS?

Yes No

Frequently Asked Questions

A

The MSW-CPI600MS provides 600 W continuous power and a peak (surge) power of 1,200 W for short durations to handle startup loads.

Is this answer helpful?

A

It includes overload protection, overheat protection (trips around ~65°C), low-voltage cut-off to protect the battery, over-voltage protection, and short-circuit protection at the output.

Is this answer helpful?

A

Yes. The inverter includes a 5V/2.4A USB port intended for charging mobile phones and small USB devices while the unit is connected to a power source.

Is this answer helpful?

A

Ensure the inverter switch is OFF, connect the included cables to the correct battery poles (+ and −), avoid excessive tightening of terminals, and preferably start the vehicle engine before connecting to prevent excessive battery drain.

Is this answer helpful?

A

No. The inverter must be kept dry and protected from high humidity or direct water exposure; do not spray with water and avoid use near water containers to prevent electric shock and damage.

Is this answer helpful?

A

Unplug before cleaning, use non-corrosive cleaners, store in a cool dry place away from sunlight, check for damage regularly, ensure ventilation, and have repairs performed only by authorized service personnel with original parts.

Is this answer helpful?

A

It will power devices within its rated continuous power (600 W) and surge capability; high-power appliances (heaters, large compressors) exceeding ratings should not be used to avoid overload and protection trips.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Stable 600 W continuous output with 1,200 W peak for short surges
  • Comprehensive protections: overload, overheat (~65°C), low/high voltage, short circuit
  • Convenient 5V/2.4A USB charging port for phones and small devices
  • Compact, portable design suitable for camping, boating, and vehicle use
  • Clear status indicators (fault, AC output, USB) and simple On/Off control
VS

Disadvantages

  • Some models use modified sine output which may not suit sensitive electronics
  • Direct battery connection can drain vehicle battery if engine not running
  • Not waterproof; must be kept dry and away from high humidity
  • Certain repairs require authorized service and original spare parts
  • Ventilation required—housing can become hot during intensive use
M: OA-GPT-5-NAN

Product Specification

Input Voltage

12V DC Voltage

Output Voltage

230V AC Modified Sine Wave

Continuous Power

600W

Peak Power

1200W

Inputs

Cable Lugs

Outputs

1x Euro Socket, 1x USB-A

Features

Overheat Protection

Dimensions

7.68x3.74x2.17in

Weight

1.21lb

M: OA-GPT-54-NAN

Product Description

MSW MSW-CPI600MS Manual — Reliable Car Power Inverter

The MSW MSW-CPI600MS is a compact car power inverter designed to convert 12V DC from a vehicle battery into stable 230V AC at 50 Hz. Built with modern components and strict quality standards, the unit delivers continuous 600 W output with a 1,200 W peak capacity, making it suitable for powering small appliances, charging devices, and running electronics while camping, boating, or working off-grid. The inverter offers a pure sine output on higher models and modified sine options on other variants, ensuring compatibility with a wide range of loads.

The unit features a clear front panel layout: an On/Off switch, indicator LEDs for fault, AC output and USB output, a 230V socket, and a 5V/2.4A USB port for charging mobile devices. Ventilation openings and an internal cooling fan manage heat during operation. Some models include an adapter for cigarette-lighter connection, while others use direct battery cables; dimensions and weights vary across the MSW-CPI family.

Safety and protection are central to the design. Multiple built-in safeguards include overload protection, overheat protection (tripping around ~65°C), low-voltage cut-off to protect the battery, over-voltage protection, and short-circuit protection at the output. These protections help prevent damage to both the inverter and connected equipment and improve reliability in mobile use.

Practical usage guidance emphasizes correct cable polarity when connecting to the battery (+ and -), avoiding excessive tightening of terminals, and ensuring connected device power does not exceed the inverter rating. For vehicle battery connections, it is recommended to start the engine before connecting the inverter to avoid excessive battery drain. Do not place the inverter on the battery, under the hood, or use it in very humid locations. Keep at least 5 cm clearance around the unit for ventilation and never cover air inlets or outlets.

Maintenance is straightforward: always disconnect from power before cleaning, use non-corrosive cleaning agents, store in a dry cool place away from direct sunlight, and never spray with water. Repairs and internal maintenance should be carried out only by authorized service personnel using original spare parts. Regular inspection for damage and proper ventilation will prolong service life.

With balanced performance, robust protections, and user-friendly features like a USB charging port and clear status LEDs, the MSW-CPI600MS is a practical choice for users needing portable 230V power from a 12V vehicle source.

Notes

  • Continuous rating: 600 W; peak rating: 1,200 W.
  • Input: 12 V DC; Output: 230 V AC, 50 Hz.
  • USB output: 5 V / 2.4 A for device charging.
  • Observe all safety instructions; do not use in wet conditions.
  • For extended or intensive use ensure proper ventilation and cooling.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly