Manual.ly Logo

Moon 760A Manual

0.0 · 0 Ratings

PDF manual · 18 Pages

English

M: QW-35-FL
page

/ 18

Loading...
88547bccfcc6b99d1c11e89cb76dc43d2ca8 page 1
The performance of a lifetime
Owner’s Manual
MOON 760A
Power Amplifier

Chat with your Moon 760A manual using AI

Get instant AI answers from your Moon 760A manual

Ask anything about the Moon 760A. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend 760A?

Yes No

Frequently Asked Questions

A

The performance will continue to improve during the first 300 hours of listening. This break-in period is required for the numerous high quality electronic parts used throughout this amplifier to function at their best level.

Is this answer helpful?

A

Yes, the unit can be converted to bridged mono mode without complex modifications. A Simaudio XLR-BRIDGE Y-cable is required to send one input signal to both channels. This mode produces 500 watts of output power at 8 ohms.

Is this answer helpful?

A

The blue LED indicates operational status. Blinking 2 times means DC protection, 3 times means overheating, and 4 times indicates an unknown problem. You must power down and check for DC in inputs or ensure ventilation is clear.

Is this answer helpful?

A

Yes, we recommend leaving your 760A powered up at all times to maintain optimal performance. If you plan on being away for a few days, it may be okay to power off, but it requires several hours to reach optimal performance again.

Is this answer helpful?

A

Use Class 2 rated loudspeaker wire properly terminated and connected securely to the binding posts. We highly recommend using high quality speaker cables as poor quality ones can degrade the overall sonic performance of your system.

Is this answer helpful?

A

No. Never wet the inside of the unit with any liquid. Clean only with a dry cloth. Never use flammable or combustible chemicals for cleaning audio components to avoid damage and safety hazards.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Dual mono design for independent channel operation and reduced crosstalk
  • High damping factor provides superior musical dynamics and refined timbre
  • Bridged mono operation delivers 500 watts output power at 8 ohms
  • Custom toroidal transformer reduces magnetic and thermal loss
  • No overall feedback circuit eliminates phase errors and distortion
VS

Disadvantages

  • Unit is heavy and requires a solid level surface to operate safely
  • Heats significantly and needs reasonable ventilation for temperature control
  • Break in period requires 300 hours of listening for optimal performance
  • Requires Class 2 rated wires and specific fuse types for safety
  • Cannot use AC extension cords and must maintain accessible plug
M: QW-35-FL

Product Specification

Channels

2

Power per Channel

130W (8 Ohm), 260W (4 Ohm)

Connectors

Stereo Line In (RCA), Stereo Line In (XLR)

Power Consumption

35W standby

Dimensions

18.74 x 4.02 x 18.11 inches (WxHxD)

Weight

44.09 lbs

M: QW-35-FL

Product Description

Welcome to High Fidelity Audio

Welcome to the world of premium audio with the Moon 760A amplifier. Designed by Simaudio, this component offers state of the art performance in an elegant package. You have selected a true Dual mono design where each channel operates completely independent of the other. Performance will continue to improve during the first 300 hours of listening. This is a break in period required for the numerous high quality electronic parts used throughout this amplifier. Before setup, please review the guidelines for the Moon 760A (various colors) Manual for proper installation and usage.

Design Excellence

The amplifier incorporates a no overall feedback circuit design. This results in real time amplification since interactions from the speaker back to the amplifier are virtually eliminated. You get more accurate musical reproduction regarding tonality and virtually non existent transient intermodulation distortion. Custom proprietary toroidal transformer design lowers magnetic electrical and thermal loss. Power supply capacitors store significant energy for better dynamics. The chassis is exceptionally rigid to minimize the effects of external vibrations. High damping factor yields superior musical dynamics.

Installation and Usage

This unit is both powerful and heavy. It requires reasonable ventilation to maintain an optimum and consistent operating temperature. Never place another component on top of this amplifier. The amplifier should be placed on a solid level surface. Avoid placing it near a heat source. If the surface you chose is not perfectly level, the four cones are height adjustable. Each leg can be raised or lowered carefully. When using balanced XLR inputs, remove the factory installed dummy jumpers. There are two pairs of heavy duty gold plated speaker binding posts for each channel to accommodate bi wiring.

Power and Performance

The Moon 760A produces 130 watts of output power per channel at eight ohms. Operate in bridged mono mode to produce 500 watts at eight ohms. Leave it powered up at all times for optimal performance. The blue LED indicates operational status. Blinking means overheating or DC presence. Always power up your preamplifier before the amplifier to avoid annoying noises. Never operate the unit with covers removed. There are no user serviceable parts inside. Contact your dealer for servicing if needed.

Remote operation allows daisy chaining. Twelve volt triggers on the rear panel help sync with preamplifiers. Specifications show frequency response from 10Hz to 200kHz. Signal to noise ratio is 104dB at full power. Intermodulation distortion sits at 0.01%. This ensures refined timbre accuracy. The high damping factor yields superior musical dynamics. It is designed to be powered up at all times. If you plan on being away for a few days, power off the amplifier. Once broken in, it requires several hours before reaching optimal performance. Keep electrical equipment out of reach of children. Unplug during lightning storms.

Safety and Maintenance

Safety is paramount for long term use. Use only Class 2 rated loudspeaker wire properly terminated. Protect the power cord from being walked on or pinched. Do not block ventilation openings. Install in accordance with manufacturer instructions. Do not install near heat sources like radiators. Clean only with a dry cloth. Unplug during lightning storms. Use a three conductor AC mains power cord. AC extension cords are not recommended. The mains plug must remain accessible. Keep these instructions safe. Heed all warnings. Follow all instructions. Never use flammable chemicals for cleaning audio components. Never wet the inside of the unit with liquid. This ensures longevity for many years of music enjoyment.

M: QW-35-FL

© Copyright 2026 Manual.ly