Manual.ly Logo

Monacor WALL-05SET/WS Manual

0.0 · 0 Ratings

PDF manual · 8 Pages

English

M: QW-35-FL
page

/ 8

Loading...
12e14366997c8854a8436f0a6464e8622d8a page 7
7
English
2 Applications
This versatile active speaker set is suited both for
home applications and professional applications,
e. g. presentations. The set includes an active
speaker (speaker with amplifier) for the left chan-
nel and a passive speaker (without amplifier) for
the right channel.
3 Installation
Use the mounting brackets to install the speaker at
a suitable place on a wall. When the speakers are
ready for operation, align them optimally towards
the listening area.
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
4 Setting into Operation
Connection
Control element
Function
Making connections
OUTPUT
RIGHT SPEAKER
Connect the passive speaker to this output. Observe the correct polarity (do not
confuse positive and negative connections).
INPUT
Connect the signal source (e. g. MP3/CD player, mixer) to the RCA jacks or to the
screw terminals. The screw terminals can be disconnected to make handling easier.
230 V~ / 50 Hz
FUSE
Connect the mains connection jack to a mains socket (230 V/ 50 Hz) via the mains
cable provided. — The fuse holder
⏛
is below the mains connection jack. Always
replace a blown fuse by one of the same type!
Operation
POWER
Switching on / off. Before switching on, set the control VOL to MIN to make sure that
the initial volume is not too high.
The power LED ON will light up when the active speaker has been switched on.
VOL Use the control to adjust the desired volume.
BASS + TREB Use the controls to adjust the sound.
—
The active speaker will go to standby after approximately 3.5 minutes if there is no
input signal. The LED ON will go out. As soon as a signal is present, the speaker will
switch on again.
5 Specifications
Model WALL-05SET / WS WALL-06SET / WS
Output power
Power rating
Maximum power
2 × 30 W
2 × 50 W
2 × 30 W
2 × 50 W
Frequency range 80 – 20 000 Hz 70 – 20 000 Hz
Input sensitivity/ Input impedance
RCA jacks, unbal.
Screw terminals, bal.
500 mV/ 20 kΩ
660 mV/ 40 kΩ
890 mV/ 20 kΩ
1600 mV/ 40 kΩ
Bass speaker
Tweeter
13 cm (5”) bass speaker
dome tweeter
16 cm (6”) bass speaker
dome tweeter
Connection impedance of passive speaker
8 Ω min. 8 Ω min.
Max. SPL 104 dB 105 dB
Power supply
Power consumption for operation / standby
230 V/ 50 Hz
100 VA / 0.4 VA
230 V/ 50 Hz
140 VA / 0.5 VA
Ambient temperature 0 – 40 °C 0 – 40 °C
Dimensions (W × H × D), weight (pair) 163 × 252 × 203 mm, 5.5 kg 196 × 303 × 250 mm, 8.05 kg
Subject to technical modification.

Chat with your Monacor WALL-05SET/WS manual using AI

Get instant AI answers from your Monacor WALL-05SET/WS manual

Ask anything about the Monacor WALL-05SET/WS. Answers come from this manual, with the pages they are based on.

WALL-05SET/WS Maintenance Schedule

As needed
Clean the speaker cabinet

Use only a soft, dry cloth for cleaning. Never use chemicals or water.

When blown
Replace the fuse

Always replace a blown fuse with one of the same type (1.0A 250V).

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend WALL-05SET/WS?

Yes No

Frequently Asked Questions

A

No, the specifications strictly state indoor use only. Protection against dripping water and high humidity is required to ensure safety and prevent damage to the components and electrical safety features.

Is this answer helpful?

A

The WALL-05SET/WS model provides two times 30 watts of power continuously. The WALL-06SET/WS version offers higher output at two times 50 watts for greater volume and headroom in larger spaces.

Is this answer helpful?

A

Connect the signal source like a player to the input jacks or screw terminals. Connect the passive speaker to the output jack on the active unit paying attention to correct polarity to ensure proper sound stage.

Is this answer helpful?

A

The active speaker automatically switches to standby after approximately 3.5 minutes of silence to save power and protect components. The LED indicator turns off until a new signal is detected and the device wakes up.

Is this answer helpful?

A

No, the instructions are designed for users without technical knowledge. Just screw the brackets to the wall and connect the input cables to your device without needing special electronics expertise.

Is this answer helpful?

A

Waste heat is dissipated via cooling fins, so ensure they are not covered. Overheating should not occur under normal use if the fins are kept clear and the unit is placed in a standard room.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Versatile design suitable for home or professional presentations and music listening
  • Wall mounting capability saves floor space and offers clear audio positioning for improved imaging
  • Active and passive speaker configuration simplifies wiring and power needs significantly for easier setup
  • Built-in standby mode reduces energy consumption automatically when input signal is absent
  • Adjustable bass and treble controls allow for customized sound quality tuning to user preference
VS

Disadvantages

  • Indoor use only restricts deployment in outdoor or high humidity environments permanently
  • Requires connection to mains voltage, posing electrical shock risks if internal servicing is attempted
  • Passive speaker lacks independent amplification and relies on the active unit for signal processing
  • Cooling fins must remain uncovered to prevent overheating and potential performance loss over time
  • Fixed installation limits physical flexibility compared to portable speaker options that move easier
M: QW-35-FL

Product Specification

Type

2-Way

Tweeter

1x

Woofer

1x 5 in

Amplification

Active

Frequency Range

80Hz-20kHz

Power

30W RMS, 50W Peak

Sensitivity

89dB

Max SPL

104dB

Dimensions

6.42 x 9.92 x 7.99 in (WxHxD)

Weight

5.69 lbs

M: QW-35-FL

Product Description

Discover High Performance Audio Solutions

The Monacor WALL-05SET/WS Pair is an excellent choice for individuals seeking high-quality sound without cluttering their living space. This active speaker set is engineered for both residential audio needs and professional environments such as meeting rooms or presentation halls where reliability is key. The system features a clever design comprising one active speaker equipped with a built-in amplifier and one passive speaker for balanced stereo output. This unique combination simplifies the installation process while delivering robust audio performance across wide frequency ranges suitable for various music genres and clear voice applications in professional settings.

Installation and Placement

Mounting these units is a straightforward task thanks to the included hardware and robust brackets provided. You can securely screw the speakers onto a suitable location on any interior wall inside the room. Once the physical installation is complete, align the speakers optimally facing the listening area to maximize sound projection and stereo imaging. Proper positioning ensures the best auditory experience for everyone in the room regardless of where they sit. It is highly recommended to consult the Monacor WALL-05SET/WS Pair Manual for detailed diagrams during this setup phase to ensure structural integrity. Ensure the surface is solid enough to hold the weight of the pair securely without wobbling during vibration from deep bass.

Audio Specifications and Control

Sound quality is significantly enhanced by a frequency response ranging from 80 to 20,000 Hz on this specific model of speaker system. The audio drivers include a 13-centimeter bass speaker and a dome tweeter for crisp highs that cut through background noise. Users can fine-tune the audio experience using the volume, bass, and treble controls located conveniently on the front panel. The input section supports RCA jacks or screw terminals, providing broad compatibility with various music sources and mixers available today. This flexibility allows for seamless integration into different audio setups for home or office. Power consumption is relatively low in standby mode, making it eco-friendly during office hours when idle for long periods.

Safety and Maintenance

Safety features are integrated directly into the design to protect users and the equipment from harm. The units operate on high mains voltage, so never attempt to open the casing yourself due to severe electrical shock risk hazards. Always keep the speakers indoors to protect them from moisture and extreme temperatures which could damage internal components permanently. The cooling fins must remain uncovered to dissipate heat effectively and prevent overheating issues that could shorten the lifespan. Additionally, the device includes a smart standby function that activates after a short period of silence to conserve energy effectively. Always clean the exterior with a dry cloth only to prevent damage from moisture or harsh chemicals that could ruin the finish. Do not place liquid containers on the speakers to avoid accidents.

Conclusion

Overall, this speaker set offers a perfect balance of power, space saving, and convenience for modern users. Whether for background music or clear presentation audio, it performs reliably and safely in almost any indoor environment. The wall-mounted design helps save valuable tabletop or shelf space which is often scarce in busy offices or small homes. With adjustable controls and durable construction, it serves as a long-term investment for quality sound in any compliant environment. Always ensure proper ventilation when installed to maintain optimal sound quality over time for years of enjoyment.

M: QW-35-FL

© Copyright 2026 Manual.ly