Manual.ly Logo

Monacor WALL-05DTM/WS Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: QW-35-FL
page

/ 24

Loading...
cef6709131cfc8191cf687ef1ccef2e9dc49 page a
10
English
Deutsch
Deutsch Seite
Français
Français Page
Italiano
Italiano Pagina
Español
Español Página
Nederlands
Nederlands Pagina
Polski
Polski Strona
Active Speaker
forDanteNetworks
These instructions are intended for audio system
installers with knowledge of network technol-
ogy. Please read the instructions carefully prior
to operation and keep them for later reference.
The figures relating to the text below can be
found on page 2.
1 Overview
1 Speaker
2
Screws for fastening the speaker to the
bracket
3 Metal bracket
4 Plastic support
5 RJ45 jack IN PoE to connect the speaker to
the network (Ethernet) and to supply the
speaker with power via the network (e. g. via
a network switch with PoE power supply).
The two LEDs at the jack indicate connection
establishment and data communication.
6
RJ45 jack LINK to route the network connec-
tion (e. g. to an additional WALL-05DTM)
The PoE power supply, however, is not
routed via this jack. The two LEDs at the
jack indicate connection establishment and
data communication.
7 Power supply jack to connect a 19 V power
supply unit as an alternative to the PoE
power supply via the network jack (5)
8 Status LEDs
1 – MASTER
2 – SYSTEM BOOTING
3 – SLAVE
4 – SYSTEM READY
2 Important Notes
The product corresponds to all relevant directives
of the EU and is therefore marked with .
The product corresponds to the relevant UK
legislation and is therefore marked with UKCA.
•
The product is suitable for indoor use only.
Protect it against dripping water, splash water
and high air humidity. The admissible ambient
temperature range is 0 – 40 °C.
•
For cleaning the product, only use a dry, soft
cloth; never use water or chemicals.
•
No guarantee claims for the product and no
liability for any resulting personal damage
or material damage will be accepted if the
product is not correctly used, if it is not safely
installed or not expertly repaired.
If the product is to be put out of opera-
tion definitively, dispose of the product
in accordance with local regulations.
3 Applications
The compact active speaker WALL-05DTM is
suited for versatile PA applications, especially
for fixed installation (e. g. for background sound
and announcements). The speaker is designed
as a 2-way system. The speaker features an
Ethernet interface that allows the speaker to
be integrated into a Dante audio network as a
receiver of audio signals.
The speaker is supplied with power via the net-
work connection (Power over Ethernet) or via
an additional power supply unit.
3.1 Dante
Dante, an audio network developed by the
company Audinate, allows transmission of up
to 512 audio channels at the same time. Dante
(Digital Audio Network Through Ethernet) uses
a common Ethernet standard and is based on
the Internet protocol. The transmission of audio
signals is uncompressed and synchronized, with
minimum latency. The advantage over analog
audio signal transmission is a cost-effective con-
nection of components via standard network
cables and low susceptibility to interference,
even in case of long transmission paths. In ad-
dition, signal routing between components that
English
English Page

Chat with your Monacor WALL-05DTM/WS manual using AI

Get instant AI answers from your Monacor WALL-05DTM/WS manual

Ask anything about the Monacor WALL-05DTM/WS. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend WALL-05DTM/WS?

Yes No

Frequently Asked Questions

A

The unit supports Power over Ethernet for simplified cabling. Alternatively, an external 19V power supply can be used for higher wattage. Lower voltages like 12V or 9V are supported but reduce output power capability.

Is this answer helpful?

A

It is designed for indoor use only. It should be mounted on walls or ceilings using the provided bracket. Avoid areas with high air humidity, dripping water, or temperature extremes outside 0 to 40 degrees Celsius.

Is this answer helpful?

A

No, the speaker itself contains no control elements. Volume adjustments must be made using digital level values at the signal source or transmitter within the Dante network configuration.

Is this answer helpful?

A

The peak sound pressure level reaches 105 dB. This ensures the audio remains clear and audible even in noisy background environments. Amplifier power varies based on the input voltage supply connected.

Is this answer helpful?

A

Configuration is done via the Dante Controller software. You access the network view to assign transmitting channels to receiving channels on the speaker. Settings are saved in the network devices directly.

Is this answer helpful?

A

Yes, the RJ45 LINK jack allows routing the network connection to additional speakers. Note that Power over Ethernet is not routed through this output port, so each unit needs independent power or PoE capability.

Is this answer helpful?

A

Only use a dry, soft cloth for cleaning. Never use water, chemicals, or wet wipes. Exposure to moisture can damage the internal components and void the warranty protection on the product.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Integrated Dante network support for uncompressed audio transmission
  • Flexible power options including Power over Ethernet and external supply
  • Clear LED status indicators for system monitoring and diagnostics
  • Adjustable mounting bracket allows precise speaker aiming
  • High sensitivity with frequency range up to 20 kHz
VS

Disadvantages

  • Indoor use only limits application to climate controlled spaces
  • No physical volume controls on the speaker chassis
  • Requires specific network switch support for Fast Ethernet
  • Configuration requires network knowledge and software tools
  • Sensitivity to moisture reduces durability in humid environments
M: QW-35-FL

Product Specification

Type

2-Way

Tweeter

1x 0.50"

Woofer

1x 5"

Amplification

Active

Frequency Range

62Hz-20kHz

Power

30W RMS

Sensitivity

89dB

Max SPL

105dB

Dimensions

6.42x9.92x6.50" (WxHxD)

Weight

4.67 lbs

M: QW-35-FL

Product Description

Advanced Audio Integration with Monacor WALL-05DTM/WS

The Monacor WALL-05DTM/WS represents a significant advancement in active loudspeaker technology designed for Dante audio networks. This professional unit allows installers to seamlessly integrate high-quality audio into digital environments without extensive cabling complexities. It is specifically built for background music and announcement systems in commercial spaces such as offices, hospitals, or retail stores. The compact form factor fits easily into drop ceilings or wall mounts where space is limited but performance is critical.

Network Capability and Dante Support

The core strength lies in its network capability provided by the Dante protocol. Utilizing this technology, the speaker receives uncompressed audio signals with minimal latency, ensuring high fidelity transmission across large networks. This system supports the transfer of up to 512 audio channels simultaneously. Users can manage routing and configuration through software tools rather than physical switches, enhancing flexibility during design phases and future maintenance. The Ethernet interface handles signal routing and power distribution efficiently.

Power Supply Flexibility

Power options provide versatility for various site requirements and architectural constraints. The unit accepts Power over Ethernet for streamlined installations where only a single cable run is available for data and power transmission via an RJ45 jack. Alternatively, a dedicated 19 volt power supply connection supports higher output wattage reaching up to 30 watts. Lower voltages are also supported at reduced power levels to accommodate legacy infrastructure or specific power budgets available on site.

Physical Build and Installation

Physical construction ensures durability and adjustability for varied acoustic environments. The 2-way system includes a 13 cm woofer paired with a 13 mm tweeter for balanced sound reproduction across the spectrum. Frequency response ranges from 62 Hz to 20 kHz with high sensitivity ratings. The design allows for wall or ceiling mounting with an adjustable metal bracket system. LED indicators provide immediate feedback on system status and synchronization status for the audio network.

During installation, the system separates a plastic support from the metal bracket. Screws secure the bracket to the wall or ceiling structure first. Then the speaker attaches to the bracket using specific mounting holes. Adjusting the angle before final tightening ensures the sound targets the correct area. Network connectivity relies on a switch supporting Fast Ethernet standards. If power via cable is not possible, the external jack allows standard DC connection. Status lights cycle during boot to confirm hardware is ready for network integration.

Important Considerations

Important Considerations: Operate strictly indoors within temperature ranges of 0 to 40 degrees Celsius to ensure reliability. High humidity or water exposure will void warranty terms and damage components. Cleaning should only be performed with a dry cloth to prevent liquid ingress damage. Audio levels must be managed carefully at the source to avoid distortion as the device lacks local volume controls on the chassis itself. Users should configure the Dante Controller software carefully for optimal routing.

This device proves essential for modern distributed audio systems requiring reliability and clarity. It simplifies the installation process while delivering professional sound quality in digital formats.

M: QW-35-FL

© Copyright 2026 Manual.ly