Manual.ly Logo

Monacor VM-1 Manual

0.0 · 0 Ratings

PDF manual · 3 Pages

English

M: QW-35-FL
page

/ 3

Loading...
5ab2ecd12f6a0b91ef1deb82b4463d080634 page 2
THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright
©
by MONACOR INTERNATIONAL. All rights reserved. A-2109.99.01.08.2021
VM -1
Order No. 1000616
3 Mounting and Connection
1) Use the suitable holder for the corresponding
camera:
Push the base of the holder into the camera
shoe mount and fix it with the knurled nut or
screw the holder to the GoPro camera holder.
2) Push the rear third of the microphone through
the two rubber rings of the holder and make
sure that the sound openings on the sides are
not covered.
3) Point the microphone in the viewing direction
of the camera and put on the foam windshield.
4) Connect the microphone to the camera or a
separate audio recorder using one of the adapt-
ers provided.
The connection must provide a DC voltage
(1.5 – 6 V) to supply the camera with power. If
not, the microphone can be connected via the
power supply adapter EMA-20.
4 Specifications
Type of microphone: . . . back electret
Pick-up pattern:
90°
270°
0°
30°330°
300°
60°
240° 120°
150°210°
180°
supercardioid
Frequency range: . . . . . 20 – 20 000 Hz
Sensitivity: . . . . . . . . . . . 10 mV/ Pa
Nominal impedance: . . . 2.2 kΩ
Max. SPL: . . . . . . . . . . . 125 dB
S/N ratio: . . . . . . . . . . . 69 dB
Supply voltage: . . . . . . .
⎓ 
1.5 – 6 V
Connection: . . . . . . . . . mini-XLR
Dimensions: . . . . . . . . . ⌀ 14 mm × 57.5 mm
Weight: . . . . . . . . . . . . 23.5 g
Subject to technical modification.
Directional Electret Microphone
These instructions are intended for users with-
out any specific technical knowledge. Please
read the instructions carefully prior to opera-
tion and keep them for later reference.
1 Applications
The compact microphone VM-1 is ideally suited
for sound recordings in combination with video
recordings. Due to its highly directional effect, the
recording of disturbing ambient noise is largely
suppressed. The microphone is supplied with a
windscreen and brackets for mounting it on a
standard camera shoe mount and on a GoPro
camera. Adapters with 3.5 mm plug or mini-USB
plug are provided for connection. Power is sup-
plied via the microphone connection.
2 Important Notes
The product corresponds to all relevant directives
of the EU and is therefore marked with .
•
The product is not waterproof. Protect it against
dripping water, splash water and high air humi-
dity. The admissible ambient temperature range
is 0 – 40 °C.
•
For cleaning the product only use a dry, soft
cloth; never use chemicals or water.
•
No guarantee claims for the product and no lia-
bility for any resulting personal damage or mate-
rial damage will be accepted if the product is not
correctly used or not expertly repaired.
If the product is to be put out of opera-
tion definitively, dispose of the product in
accordance with local regulations.
English

Chat with your Monacor VM-1 manual using AI

Get instant AI answers from your Monacor VM-1 manual

Ask anything about the Monacor VM-1. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend VM-1?

Yes No

Frequently Asked Questions

A

It is a directional electret microphone featuring a supercardioid pickup pattern for focused audio capture.

Is this answer helpful?

A

Use the included adapters for standard three point five mm or mini interfaces depending on your setup.

Is this answer helpful?

A

No, the unit is not waterproof and must be protected from dripping water, spray, and humidity.

Is this answer helpful?

A

The device covers a frequency range from twenty Hertz up to twenty thousand Hertz.

Is this answer helpful?

A

Yes, it includes brackets for standard camera shoe mounts and specific holders for GoPro cameras.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Highly directional supercardioid pattern suppresses ambient noise effectively for clean audio.
  • Compact design allows easy mounting on standard camera shoes and GoPro mounts.
  • Included foam windscreen protects against wind noise during outdoor shoots.
VS

Disadvantages

  • Not waterproof so exposure to rain or high humidity must be avoided at all times.
  • Requires specific voltage supply which some cameras might not provide natively.
  • No warranty accepted if product is incorrectly used or repaired by non experts.
M: QW-35-FL

Product Specification

Type

Camera Microphone, Shotgun Microphone

Design

Analog

Transducer Principle

Condenser

Polar Pattern

Super-cardioid

Connection

Jack (3.5mm Jack), Mini-XLR 3-Pin, USB Mini-B

Frequency Range

20Hz-20kHz

Nominal Impedance

2,200 Ohm

Max SPL

125 dB

Signal-to-Noise Ratio (SNR)

69 dB

Power Supply

Battery

Package Contents

Windscreen

Dimensions

2.26 x 0.55 x 0.55 in

Weight

0.85 oz

M: QW-35-FL

Product Description

Enhanced Audio Capture with Monacor VM-1

Achieve professional sound quality in your video projects with the Monacor VM-1 compact directional microphone. This device bridges the gap between visual storytelling and crystal clear audio recording. Whether you are a filmmaker or a content creator, capturing crisp dialogue while minimizing background noise is essential for production value. The VM-1 is engineered to deliver exactly that performance through its advanced electret technology designed for high fidelity output.

Superior Directional Performance

The core strength of this equipment lies in its highly directional pickup pattern. By utilizing a supercardioid characteristic, the microphone focuses on sound sources directly in front of the lens while suppressing ambient disturbances. This ensures that your audience hears exactly what you intend them to hear without distractions from wind or traffic. The frequency response spans from twenty to twenty thousand Hertz, covering the full spectrum of human vocal range and environmental sounds. Sensitivity specifications allow for low noise floor operation even in quiet environments with a signal to noise ratio of sixty-nine dB.

Versatile Mounting Solutions

Flexibility is key for modern creators who shoot in various locations. The package includes robust mounting brackets designed to fit standard camera shoe mounts commonly found on professional video cameras. Additionally, GoPro users benefit from dedicated hardware that secures the unit without compromising the camera body. A foam windscreen is included to further mitigate wind noise during outdoor shoots. Connection options vary with included adapters for standard three point five mm or mini interfaces. Power is drawn directly from the camera interface using a specific voltage range. Compatibility ensures you get the most out of your camera gear system. If the camera does not provide sufficient power, an external supply adapter ensures continuous operation without interruption.

Maintenance and Specifications

Keeping the device in optimal condition requires adherence to care instructions. The unit is not waterproof so exposure to moisture must be avoided strictly. Cleaning should be performed using only a dry soft cloth to prevent damage to sensitive components. Operating temperatures range between zero and forty degrees Celsius to ensure electronic stability. Weighing only twenty-three point five grams it remains lightweight yet durable for extended field use. The compact dimensions allow for easy integration into tight setups without adding bulk. Users reading the Monacor VM-1 Manual will find these details vital for longevity and sound reliability. This tool empowers creators to focus on content rather than technical limitations during production. Impedance levels match standard equipment allowing seamless integration without impedance matching boxes. Maximum sound pressure tolerance reaches one hundred twenty-five decibels making it suitable for loud environments too.

M: QW-35-FL

© Copyright 2026 Manual.ly