Manual.ly Logo

Monacor Sound-100Sub Manual

0.0 · 0 Ratings

PDF manual · 30 Pages

English

M: QW-35-FL
page

/ 30

Loading...
6f8342b979b41e4c8a1f1eaec855e7ac31b0 page 8
8
Deutsch
Deutsch Seite
Inhalt
Français
Français Page
Table des matières
Italiano
Italiano Pagina
Indice
Español
Español Página
Contenidos
Nederlands
Nederlands Pagina
Inhoud
Polski
Polski Strona
Spis treści
English
English Page
Contents
English
Contents
1 Operating Elements
and Connections . . . . . . . . . . . 8
2 Safety Notes . . . . . . . . . . . . . 9
3 Applications. . . . . . . . . . . . . .9
4 Setting Up and Connecting . . . . . 9
4.1 Stereo input LINE IN . . . . . . . . . 10
4.2 Stereo input HIGH LEVEL IN . . . . . 10
4.3 Mono input LFE. . . . . . . . . . . . 10
4.4 Power supply . . . . . . . . . . . . . 10
5 Operation . . . . . . . . . . . . . . 10
5.1 Protective circuits . . . . . . . . . . . 11
6 Specifications . . . . . . . . . . . . 11
Active Subwoofer System
These operating instructions are intended for
users with basic knowledge in audio technol-
ogy. Please read the instructions carefully prior
to operating the unit and keep them for later
reference.
All operating elements and connections
described can be found on the fold-out page 3.
1 Operating Elements
and Connections
1 POWER LED
green subwoofer in operation
red subwoofer in standby mode or pro-
tective circuit activated
2 VOLUME control
3
CROSSOVER control to adjust the cutoff fre-
quency (50 – 150 Hz) of the low pass filter for
the inputs LINE IN and HIGH LEVEL IN
4 POWER switch
5 Support for the mains fuse;
always replace a blown fuse by one of the
same type
6
Cable for connection to a mains socket
(230 V/ 50 Hz)
7 Stereo signal input LINE IN (RCA jacks)
8 Mono signal input LFE (RCA jack)
9 PHASE reversal switch
10 STAND BY selector switch
position OFF: always in standby mode
position ON: always in operation
position AUTO: switching between the
modes operation and
standby depending on
the signal level
11
Stereo signal input HIGH LEVEL IN for connec-
tion to the speaker output of an amplifier
There are banana jacks under the protective
caps of the screw terminals.
12
Feed-through outputs HIGH LEVEL OUT,
connected to the corresponding jacks
HIGH LEVEL IN (11), for connecting the
other speakers
There are banana jacks under the protective
caps of the screw terminals.

Chat with your Monacor Sound-100Sub manual using AI

Get instant AI answers from your Monacor Sound-100Sub manual

Ask anything about the Monacor Sound-100Sub. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Sound-100Sub?

Yes No

Frequently Asked Questions

A

The subwoofer delivers a peak output power of 200 watts and a continuous RMS power of 120 watts, providing strong low-frequency performance.

Is this answer helpful?

A

Yes, the unit features a dedicated LFE input specifically designed for connecting to multi-channel systems like 5.1 setups for low-frequency effects.

Is this answer helpful?

A

Use the CROSSOVER control knob to adjust the cutoff frequency of the low-pass filter between 50 Hz and 150 Hz to match your main speakers.

Is this answer helpful?

A

Yes, it includes a STAND BY switch with an AUTO position that puts the unit into standby mode automatically when no signal is detected for a few minutes.

Is this answer helpful?

A

A red LED indicates the protective circuit has activated due to overload or overheating. Turn the unit off immediately and let it cool down before checking the cause.

Is this answer helpful?

A

No, this device is strictly for indoor use only and must be protected from moisture, humidity, and extreme temperatures.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High peak power output of 200 W for dynamic bass response
  • Multiple connection options including LINE IN, HIGH LEVEL IN, and LFE
  • Adjustable crossover filter from 50 Hz to 150 Hz for precise tuning
  • Automatic standby mode saves energy when idle
  • Built-in protection circuits prevent overload and overheating
VS

Disadvantages

  • Heavy weight of 13 kg makes moving it difficult
  • No wireless connectivity options available
  • Bass reflex ports require clearance from walls to function correctly
  • Limited to indoor use only due to environmental restrictions
  • Manual volume control requires careful adjustment to avoid distortion
M: QW-35-FL

Product Specification

Subwoofer

1x 10"/254mm

Amplification

active

Design

Frontfire

Enclosure type

Bass reflex

Frequency range

35Hz-100Hz

Power

120W RMS, 200W Peak

Max SPL

108dB

Color

black

Dimensions (WxDxH)

13.0x14.2x14.2 in

Weight

28.77 lbs

M: QW-35-FL

Product Description

Monacor Sound-100Sub: Elevate Your Audio Experience

The Monacor Sound-100Sub is a compact active subwoofer designed to bring deep, resonant bass to your home audio setup. Whether you are building a high-fidelity stereo system, setting up a home cinema, or creating a home recording studio, this device serves as the perfect low-frequency complement to your existing speakers. Powered by a robust amplifier capable of delivering a peak output of 200 watts and a continuous RMS power of 120 watts, it features a 25-centimeter (10-inch) bass driver that handles the lowest notes with precision.

Installation is straightforward thanks to versatile connectivity options. You can connect via standard line-level inputs for preamplifiers or mixers, or utilize the high-level inputs to tap directly into speaker outputs from an integrated amplifier. The unit also includes a dedicated LFE input for multi-channel systems like 5.1 setups, ensuring seamless integration for movie enthusiasts. An adjustable crossover filter allows you to set the cutoff frequency between 50 Hz and 150 Hz, optimizing the blend between the subwoofer and your main speakers. Additionally, a phase switch helps eliminate acoustic cancellations caused by room acoustics or speaker placement.

Safety and convenience are built into the design with automatic standby modes that save energy when no signal is present. The internal amplifier is protected against overheating and overload, indicated by a clear LED status light that shows green during operation and red when in standby or if a fault is detected. With dimensions of 330 x 360 x 360 mm and a weight of 13 kg, it fits easily into most listening environments without dominating the space.

Key Notes for Users

Ensure the unit is placed on a flat surface away from walls to allow proper heat dissipation through the bass reflex openings. Always switch off connected equipment before making connections to prevent damage. Regularly check the fuse if the unit fails to power on, replacing it only with the specified type.

M: QW-35-FL

© Copyright 2026 Manual.ly