Manual.ly Logo

Monacor PATL-105 Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
b3be61dfc66f5c1a8e3e46314580aa840413 page 2
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright
©
by MONACOR INTERNATIONAL. All rights reserved.
A-2099.99.01.05.2021
PATL-10 5
OUTPUTS
1 V
100
V
+
+
Z5
(YE)
1 V
100
V
+
Z4
(OG)
1 V
100
V
+
Z3
(RD)
1 V
100
V
+
Z2
(BN)
1 V
100
V
+
Z1
(BK)
+ + +
+
5 4 3 2 1
2
3
1
PATL-105
Order number 1000266
5-Channel Transformer
forConverting 100 V Signals
into Line Level Signals
These instructions are intended for in-
stallers with specific knowledge of sound
reproduction using 100 V technology.
Please read the instructions carefully prior
to installation and keep them for later ref-
erence.
1 Applications
The 5-way transformer PATL-105 is used in PA
systems to convert 100 V audio signals into
line level signals. Thus, it is possible to have a
tap for an additional amplifier with line level
input on each of five 100 V lines. This allows
the PA system to be expanded, e. g. for repro-
ducing sound in additional rooms. For the PA
mixing amplifiers PA-1120, PA-1240, PA-6240,
PA-6480 and PA-6600 and also the more recent
versions PA-5240 and PA-5480, it is possible to
install PATL-105 on the rear of the amplifier.
2 Safety Notes
The product corresponds to all relevant direc-
tives of the EU and is therefore marked with .
WARNING During operation, there is a
hazard of contact with a dan-
gerous voltage of up to 100 V
at the connection cables.
Installation must be carried out
by skilled personnel only.
•
The product is suitable for indoor use only.
Protect it against dripping water, splash
water and high air humidity. The admissible
ambient temperature range is 0 – 40 °C.
•
For cleaning the product only use a dry, soft
cloth; never use chemicals or water.
•
No guarantee claims for the product and no
liability for any resulting personal damage
or material damage will be accepted if the
product is not correctly used or not expertly
repaired.
If the product is to be put out of
operation definitely, dispose of the
product in accordance with local reg-
ulations.
3 Installation
1) Always switch off the PA system completely
before installing PATL-105 so that the 100 V
outputs of the PA amplifier will not carry any
voltage!
2) Connect the cables (3) to the 100 V output
terminals of the amplifier (each in parallel to
a speaker cable connected).
Channel + −
1 white black
2 white brown
3 white red
4 white orange
5 white yellow
3) Connect the line level inputs of the devices
to be connected (e. g. additional amplifiers)
to the corresponding terminal pairs (2).
4) Use the screws provided to attach PATL-105
via the mounting brackets (1) to the ampli-
fier, for example.
If it is necessary to remove the sheet metal
parts on the lower side for leading the cables
out, cut open their joining pieces to do so.
4 Specifications
Frequency range: . . . . . 15 – 30 000 Hz
Input impedance: . . . . . 20 kΩ
Output impedance: . . . . 200 Ω
Rated output level: . . . . 1 V
Connection at input: . . . cable (15 cm approx.)
with cable lugs
Connection at output:
. screw terminals
Ambient temperature:
. 0 – 40 °C
Dimensions
(W × H × D): . . . . . . . . . 120 × 75 × 60 mm
Weight: . . . . . . . . . . . . 410 g
Subject to technical modification.
English

Chat with your Monacor PATL-105 manual using AI

Get instant AI answers from your Monacor PATL-105 manual

Ask anything about the Monacor PATL-105. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend PATL-105?

Yes No

Frequently Asked Questions

A

It converts 100-V audio signals into line level signals for five separate channels.

Is this answer helpful?

A

No, it is suitable for indoor use only and must be protected from water and humidity.

Is this answer helpful?

A

It works with PA-1120, PA-1240, PA-6240, PA-6480, PA-6600, PA-5240, and PA-5480.

Is this answer helpful?

A

Yes, skilled personnel must perform the installation to ensure safety.

Is this answer helpful?

A

The frequency range spans from 15 Hz to 30,000 Hz for full audio spectrum reproduction.

Is this answer helpful?

A

Use a dry soft cloth to clean the surface never using water or chemicals.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports conversion of five high voltage audio lines to standard line level signals for system expansion
  • Compatible with Monacor PA series amplifiers allowing direct rear mounting for streamlined installation
  • Uses color-coded wiring to simplify channel identification and reduce wiring errors during setup
  • Meets EU safety directives ensuring compliance with electrical standards for professional use
  • Compact design fits in 120 by 75 by 60 mm space with a lightweight 410 gram package
VS

Disadvantages

  • Requires skilled personnel installation due to hazardous voltage exposure on cable connections
  • Restricted to indoor environments only preventing outdoor weatherproof deployment scenarios
  • Maximum of five conversion channels limits the number of additional outputs per single unit
  • Voltage reaches up to 100 V creating contact hazards during active operation
  • Void of warranty if not expertly repaired by authorized service technicians
M: QW-35-FL

Product Specification

Type

Other

Compatible with

Monacor PA-1120, PA-1240, PA-6240, PA-6480, PA-6600

M: QW-35-FL

Product Description

Monacor PATL-105 Product Overview

The Monacor PATL-105 stands as a robust solution for specialized audio installations requiring precise signal conversion. This five-channel transformer integrates advanced audio systems by converting high voltage 100-V signals into standard line level signals. This capability allows technicians to expand existing setups significantly without compromising audio quality. Installing this device enables users to tap into five separate 100-V lines, providing additional output points for extra amplifiers equipped with line level inputs. Such flexibility is essential for scaling up public address systems to cover larger venues or adding sound to new rooms.

Compatible with a wide range of specific professional audio mixing amplifiers, the unit simplifies integration. Models such as the PA-1120, PA-1240, PA-6240, PA-6480 and PA-6600 support direct rear mounting capabilities. Newer versions of the PA-5240 and PA-5480 also allow for this specific configuration. This ensures that legacy systems can be upgraded effectively using standard components. The device features clearly color-coded connection wires that assist installers in accurate wiring procedures. White combined with black, brown, red, orange, and yellow identifiers help distinguish the five distinct channels quickly.

Installation and Safety Guidelines

Safety is paramount during operation since voltage levels reach dangerous levels up to 100 V. Skilled personnel must perform the installation without exception. Always switch off the PA system completely before connecting cables to the amplifiers. The unit is suitable for indoor environments only and should be protected from moisture or extreme temperatures between zero and 40 C. Maintenance requires only a dry soft cloth for cleaning. Chemicals should never be used.

Technical Specifications

Technical specifications indicate a frequency range from 15 Hz to 30000 Hz which covers standard audio requirements. Input impedance is specified at 20 k-ohm while output impedance sits at 200 ohm. The rated output level remains constant at 1 V. Dimensions measure 120 by 75 by 60 mm with a weight of 410 grams. This compact size facilitates easy mounting on existing equipment racks. Users can access mounting brackets included in the package for secure attachment.

Product Notes

Notes for successful deployment include ensuring all power sources are disconnected. Verify that all connections match the specified color codes to prevent channel swapping. Dispose of unused components according to local regulations if the system is decommissioned. Never attempt to repair the unit internally if issues arise as this voids warranties. Reliable performance is ensured through compliant engineering standards for the professional market.

M: QW-35-FL

© Copyright 2026 Manual.ly