Manual.ly Logo

Monacor IT-250TW Manual

0.0 · 0 Ratings

PDF manual · 3 Pages

English

M: OA-GPT-54-NAN
page

/ 3

Loading...
b233305378c7200bf94297f267e4e8612296 page 1
®
Druckkammer-Musikhorn
Bitte lesen Sie diese Anleitung vor der Installation
gründlich durch und heben Sie sie für ein späteres
Nachlesen auf.
1 Verwendungsmöglichkeiten
Dieser Druckkammerlautsprecher ist speziell für den
Einsatz in ELA-Beschallungsanlagen konzipiert. Er ist
mit einem Übertrager für den Betrieb an 100-V-An -
lagen ausgestattet, kann aber auch direkt an nieder-
ohmige Verstärkerausgänge angeschlossen werden.
Um eine gute Musikwiedergabe zu erreichen, ist er als
2-Wege-System aufgebaut (16-cm-Tiefmitteltöner und
2,5-cm-Hochtonhorn). Durch das wetterfeste ABS-
Gehäuse (IP 66) eignet sich der Lautsprecher auch für
den Außenbereich.
2 Wichtige Hinweise für den Gebrauch
Der Lautsprecher entspricht allen relevanten Richt -
linien der EU und ist deshalb mit gekennzeichnet.
G
Schützen Sie den Lautsprecher vor extremen Tempe-
raturen (zulässiger Einsatztemperaturbereich:
-
20 °C
bis +50 °C).
G
Verwenden Sie zum Reinigen nur ein trockenes
oder angefeuchtetes, weiches Tuch, auf keinen Fall
scharfe Reinigungsmittel oder Chemikalien.
G
Wird der Lautsprecher zweckentfremdet, nicht fach-
gerecht montiert, falsch angeschlossen oder über-
lastet, kann keine Haftung für daraus resultierende
Sach- oder Personenschäden und keine Garantie
für den Lautsprecher übernommen werden.
3 Installation
1) Den Lautsprecher an geeigneter Stelle festschrau-
ben und auf die zu beschallende Fläche ausrichten.
2) Vor dem Anschluss des Lautsprechers die ELA-
Anlage komplett ausschalten, damit die Lautspre-
cherleitung spannungsfrei ist!
WARNUNG Im Betrieb liegt berührungsgefährliche
Spannung bis 100 V an der Anschluss-
leitung an. Die Installation darf nur
durch Fachpersonal erfolgen.
Achten Sie auf die Belastung des ELA-Verstärkers
durch die Lautsprecher. Eine Überlastung kann den
Verstärker beschädigen! Die Summe der Leistungen
aller angeschlossenen Lautsprecher darf die Verstär-
kerleistung nicht überschreiten.
Soll der Lautsprecher endgültig aus dem
Betrieb genommen werden, übergeben Sie
ihn zur umweltgerechten Entsorgung einem
örtlichen Recyclingbetrieb.
3) Die Anschlüsse des Lautsprechers befinden sich
unter dem Schutzdeckel auf der Rückseite. Den
Deckel abschrauben.
4) Die Lautsprecherleitung durch die Kabeldurchfüh-
rung des Deckels stecken und an die Schraub-
klemmen des Lautsprechers anschließen:
Beim Anschluss von mehreren Lautsprechern
darauf achten, dass die Lautsprecher alle gleich
gepolt werden.
5) Den Schutzdeckel wieder anschrauben und die
Mutter der Kabeldurchführung festziehen, sodass
die Anschlüsse wettergeschützt sind.
Änderungen vorbehalten.
Klemmen-Nr. Nennbelastung Impedanz
1 + 2 50 W 200 Ω
2 + 3 25 W 400 Ω
3 + 4 12,5 W 800 Ω
1 + 3 9W 1,1 kΩ
2 + 4 4,5 W 2,2 kΩ
1 + 4 3,5 W 2,8 kΩ
1 + 5 50 W 8Ω!
IT-250TW Bestellnummer 16.3190
Music Horn Speaker
Please read these operating instructions carefully
prior to the installation and keep them for later use.
1 Applications
This horn speaker is especially designed for applica-
tion in PA systems. It is equipped with a transformer for
operation at a 100 V system but may also be directly
connected to low-impedance amplifier outputs. To pro-
vide high-quality music reproduction, the speaker is
designed as a 2-way system (16 cm bass-midrange
speaker and 2.5 cm tweeter horn). Due to its weather-
proof ABS housing (IP 66), the speaker is also suited
for outdoor applications.
2 Important Notes
The speaker corresponds to all relevant directives of
the EU and is therefore marked with .
G
Protect the speaker against extreme temperatures
(admissible ambient temperature range:
-
20 °C to
+50 °C).
G
For cleaning, only use a soft cloth, dry or slightly
wet, never use aggressive detergents or chemicals.
G
No guarantee claims for the speaker and no liability
for any resulting personal damage or material dam-
age will be accepted if the speaker is used for other
purposes than originally intended, if it is not installed
in an expert way, not correctly connected, or if it is
overloaded.
3 Installation
1) Fasten the speaker at a suitable place using
screws, and align the speaker to the desired direc-
tion of sound.
2) Prior to connecting the speaker, completely switch
off the PA system so that the speaker cable does
not carry any voltage.
WARNING During operation, there is a hazard of
contact with a voltage of up to 100 V at
the speaker cable. Installation must be
made by skilled personnel only.
Pay attention to the load of the PA amplifier by the
speakers. An overload may damage the amplifier!
The total power of all speakers connected must not
exceed the power of the amplifier.
If the speaker is to be put out of operation
definitively, take it to a local recycling plant for
a disposal which is not harmful to the envi-
ronment.
3) The connections of the speaker are located
beneath the protection cover on the rear side.
Remove the cover.
4) Pull the speaker cable through the grommet of the
cover and then connect the speaker cable to the
screw terminals of the speaker:
When connecting multiple speakers make sure that
all speakers have the same polarity.
5) Screw the protection cover on the speaker and
tighten the nut of the grommet so that the connec-
tions are weather-proof.
Subject to technical modifications.
Terminal no. Power rating Impedance
1 + 2 50 W 200 Ω
2 + 3 25 W 400 Ω
3 + 4 12.5 W 800 Ω
1 + 3 9W 1.1 kΩ
2 + 4 4.5 W 2.2 kΩ
1 + 4 3.5 W 2.8 kΩ
1 + 5 50 W 8Ω!
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright
©
by MONACOR INTERNATIONAL. All rights reserved. A-1493.99.01.12.2013
®
D A CH
GB
Technische Daten Specifications IT-250TW
Nennbelastbarkeit
100-V-Betrieb
8-Ω-Betrieb
Power rating
100 V operation
8 Ω operation
50 / 25 / 12,5 / 9 / 4,5 / 3,5 WRMS
50 WRMS
Frequenzbereich Frequency range 150 – 15 000 Hz
Mittlerer Schalldruck (1 W/1 m) SPL (1 W/1 m) 97 dB
Abstrahlwinkel horizontal/vertikal Radiation angle horizontal/vertical 100°/60°
Gehäuseschutzart Protective class of housing IP 66
Abmessungen Dimensions 370 × 270 × 305 mm
Gewicht Weight 4,1 kg

Chat with your Monacor IT-250TW manual using AI

Get instant AI answers from your Monacor IT-250TW manual

Ask anything about the Monacor IT-250TW. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend IT-250TW?

Yes No

Frequently Asked Questions

A

It is designed for speech, paging, and background music in indoor or outdoor spaces. Its 2-way horn design helps deliver clearer voice reproduction and more balanced sound than a standard single-driver horn speaker.

Is this answer helpful?

A

Yes. It has an IP66 rating and a weather-resistant ABS housing, so it is built to handle dust and strong weather exposure. It is suitable for entrances, yards, terraces, and similar installations.

Is this answer helpful?

A

Yes. The IT-250TW supports 100 V line operation and also works in 8 Ohm mode. That makes it flexible for both distributed audio systems and standard speaker setups.

Is this answer helpful?

A

It can do both. The 2-way design gives it better music reproduction than many horn speakers, while still keeping speech clear and direct. It is especially useful where announcements and light music share the same system.

Is this answer helpful?

A

It is efficient, with a sensitivity of 97 dB/W/m, so it can produce strong output without needing excessive amplifier power. The exact loudness depends on installation, amplifier choice, and the selected power tap.

Is this answer helpful?

A

It is supplied with a mounting bracket, which helps simplify installation. That makes it easier to position the speaker securely on a wall or other suitable surface.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 2-way design improves voice clarity and adds more natural music playback.
  • IP66 protection and ABS housing make it suitable for outdoor and dusty areas.
  • Supports both 100 V line and 8 Ohm operation for flexible installation.
  • High sensitivity and wide dispersion help cover spaces efficiently.
VS

Disadvantages

  • The 150 Hz lower limit means it will not produce deep bass.
  • It is better for speech and background music than true hi-fi listening.
  • The 4.1 kg weight is manageable, but not as light as smaller horns.
  • Best results depend on correct amplifier matching and installation.
M: OA-GPT-54-NAN

Product Specification

Type

2-way

Tweeter

1x

Woofer

1x

Amplification

passive

Frequency Range

150Hz-15kHz

Power Handling

50W RMS

Impedance

8Ω

Dispersion Angle

60°x100°

Dimensions

14.57x10.63x12.01in (WxHxD)

Weight

9.04 lb

M: OA-GPT-54-NAN

Product Description

Monacor IT-250TW White: Weatherproof 2-Way Music Horn

The Monacor IT-250TW white, piece manual points to a horn speaker designed for real-world audio distribution rather than simple paging alone. It combines the efficiency of a horn with the fuller presentation of a 2-way design, so speech stays understandable while music gains more presence. A 16 cm bass-midrange driver handles the body of the sound, while a 25 mm horn tweeter adds definition on top. The result is a more complete audio experience than a conventional single-driver horn can usually provide.

Durable enough for outdoor use

This speaker is built for locations where weather and dust are part of everyday life. The IP66 rating and ABS plastic housing help protect it against harsh conditions, making it suitable for entrances, terraces, warehouses, school grounds, parking areas, or other exposed sites. The white finish also gives it a clean, understated look that works well when the installation needs to remain visually discreet.

Flexible installation for different systems

One of the strongest points of the IT-250TW is its ability to work in both 100 V line systems and 8 Ohm setups. That versatility makes it easier to fit into new projects or replace older equipment without rethinking the whole audio chain. In 100 V mode, the selectable power taps allow the output to be matched to the space and amplifier. In 8 Ohm mode, it can serve as a direct, efficient speaker for standard installations.

Clear sound with practical coverage

With a sensitivity of 97 dB/W/m, the speaker is efficient and capable of producing a solid output without demanding excessive amplifier power. Its frequency range of 150 to 15,000 Hz is well suited to voice reinforcement and background music, especially when intelligibility matters more than deep bass. The 100-degree horizontal and 60-degree vertical dispersion help spread sound across a listening zone, reducing hot spots and making coverage more even.

Why it stands out

Compared with many traditional horn speakers, the IT-250TW aims for a more refined listening result. That makes it appealing in places where a spoken announcement must cut through noise, but the same system also needs to play ambient music during business hours. The combination of efficiency, dispersion, and dual impedance gives it broad usefulness for commercial, institutional, and public-facing spaces.

A sensible choice for everyday installations

For audio planners and installers, the IT-250TW offers a useful middle ground between ruggedness, clarity, and flexibility. It is not designed to replace a hi-fi loudspeaker, but it does a strong job where reliable outdoor performance and better-than-average horn sound are important. The included mounting bracket simplifies installation, and the 4.1 kg weight keeps handling manageable during setup.

Notes

  • Good fit for paging, announcements, and light music
  • Weather-resistant construction supports outdoor deployment
  • Always confirm amplifier compatibility before wiring
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly