Manual.ly Logo

Monacor EUL-2SUB Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-5-NAN
page

/ 4

Loading...
3c15ca237409f7b50ea16eadc11d8e61a204 page 2
2
FREQUENCY RANGE 70 -19,000 Hz
2-WAY SPEAKER SYSTEM
EUL-2
/SW
Best.-N
r. 17.4450
50
37.5
25
12.5
WRMS
100 V
EUL-2SUB/SW
Best.-Nr. 17.4460
100 V
INPUT
PAR./SAT
OUT
FREQUENCY RANGE 38 -250 Hz
SUBWOOFER SYSTEM
120
90
60
30
WRMS
32 2
1 1
DeutschEnglish
ELA-Lautsprecherboxen
Diese Anleitung richtet sich an Installateure mit
Fachkenntnissen in der 100-V-Beschallungs-
technik. Bitte lesen Sie die Anleitung vor der
Installation gründlich durch und heben Sie sie
für ein späteres Nachlesen auf.
1 Verwendungsmöglichkeiten
Diese Lautsprecherboxen sind speziell für den
Einsatz in Beschallungsanlagen konzipiert,
die mit 100-V-Technik arbeiten. Das Modell
EUL-2 / SW ist eine Fullrange-Lautsprecherbox
mit zwei 20-cm-Basslautsprechern (8”) und
einem 25-mm-Hornhochtöner (1”).
Das Modell EUL-2SUB / SW ist eine Subwoo-
ferbox mit einem 30-cm-Basslautsprecher (12”)
und integrierter Frequenzweiche (Tiefpass). Sie
dient zur Tiefbass ergänzung von ELA-Lautspre-
chern und passt perfekt zum Modell EUL-2 / SW.
2 Wichtige Hinweise
fürdenGebrauch
Der Lautsprecher entspricht allen relevan-
ten Richtlinien der EU und trägt deshalb das
-Zeichen.
•
Der Lautsprecher ist nur zur Verwendung im
Innenbereich geeignet. Schützen Sie ihn vor
Tropf- und Spritzwasser, hoher Luftfeuchtig-
keit und Hitze (zu lässiger Einsatztemperatur-
bereich 0 – 40 °C).
•
Verwenden Sie zum Reinigen nur ein trocke-
nes, weiches Tuch, auf keinen Fall Wasser
oder Chemikalien.
•
Wird der Lautsprecher zweckentfremdet,
falsch angeschlossen oder überlastet, kann
keine Haftung für daraus resultierende Sach-
oder Personenschäden und keine Garantie
für den Lautsprecher übernommen werden.
Soll der Lautsprecher endgültig aus
dem Betrieb genommen werden,
übergeben Sie ihn zur umweltgerech-
ten Entsorgung einem örtlichen Recy-
clingbetrieb.
3 Installation
WARNUNG Im Betrieb liegt berührungsge-
fährliche Spannung bis 100 V an
der Lautsprecherleitung an. Die
Installation darf nur durch Fach-
personal erfolgen.
Achten Sie auf die Belastung des ELA-Ver-
stärkers durch die Lautsprecher. Eine Überlas-
tung kann den Verstärker beschädigen! Die
Summe der Leistungen aller angeschlossenen
Lautsprecher darf die Verstärkerleistung nicht
überschreiten.
1) Das Modell EUL-2SUB / SW frei auf dem
Boden aufstellen. Über die Subwooferbox
lässt sich in einem bestimmten Abstand eine
Lautsprecherbox (z. B. EUL-2 / SW) als Topteil
aufsetzen. Dazu ein Boxen-Zwischenstück
(z. B. PAST-28 / SW) in die Stativhülse auf der
Oberseite der Subwooferbox stecken und
darauf die Lautsprecherbox. Das Modell
EUL-2 / SW kann auch separat auf ein Boxen-
stativ montiert werden.
2) Vor dem Anschluss des Lautsprechers die
ELA-Anlage komplett ausschalten, damit
die 100-V-Audioleitung vom ELA-Verstärker
spannungsfrei ist!
3) Über die Speakon
®
-Eingangsbuchse (2) den
Lautsprecher mit dem ELA-Verstärker ver-
binden. Der Speakon-Stecker muss wie folgt
angeschlossen sein:
1−
2
−
2+
1+
1+ = Lautsprecher-Pluspol
(gekennzeichnete Ader)
1− = Lautsprecher-Minuspol
2+ und 2− bleiben frei
4) Mit dem Drehschalter (1) auf der Geräte-
rückseite die Nennbelastung einstellen.
5) Bei der Box EUL-2SUB / SW kann über die
Speakon-Ausgangsbuchse PAR. / SAT OUT (3)
ein weiterer 100-V-Lautsprecher (z. B. EUL-
2 / SW) angeschlossen werden.
6) Beim Anschluss von mehreren Lautspre-
chern darauf achten, dass die Lautsprecher
alle gleich gepolt werden.
Änderungen vorbehalten.
PA Speaker Systems
These instructions are intended for installers
with sufficient knowledge in 100 V technology
for PA applications. Please read the instructions
carefully prior to installation and keep them for
later reference.
1 Applications
These speakers systems are specially designed
for application in PA systems operating with
100 V technique. EUL-2 / SW is a full-range
speaker system with two 20 cm (8”) bass
speakers and a 25 mm (1”) horn tweeter.
EUL-2SUB / SW is a subwoofer system with a
30 cm (12”) bass speaker and an integrated
crossover network (low pass). It is used as a
low-frequency complement of PA speakers and
is a perfect match for EUL-2 / SW.
2 Important Notes
The speaker corresponds to all relevant direc-
tives of the EU and is therefore marked with
.
•
The speaker is suitable for indoor use only.
Protect it against dripping water and splash
water, high air humidity and heat (admissible
ambient temperature range 0 – 40 °C).
•
For cleaning only use a dry, soft cloth; never
use water or chemicals.
•
No guarantee claims for the speaker and
no liability for any resulting personal dam-
age or material damage will be accepted if
the speaker is used for other purposes than
originally intended, if it is not correctly con-
nected, or if it is overloaded.
If the speaker is to be put out of op-
eration definitively, take it to a local
recycling plant for a disposal which is
not harmful to the environment.
3 Installation
WARNING During operation, there is a haz-
ard of contact with a voltage of
up to 100 V at the speaker cable.
Installation must be made by
skilled personnel only.
Observe the load of the PA amplifier by the
speaker systems. An overload may damage
the amplifier! The total power of all speaker
systems connected must not exceed the am-
plifier power.
1) Set up EUL-2SUB / SW on the floor. A speaker
system (e. g. EUL-2 / SW) can be placed as
a top part onto the subwoofer system at
a certain distance. For this purpose, insert
an adapter for speaker systems (e. g. PAST-
28 / SW) into the stand sleeve provided on
the upper side of the subwoofer system and
place the speaker system on the adapter.
EUL-2 / SW can also be mounted separately
onto a speaker stand.
2) Completely switch off the PA system before
connecting the speaker so that the 100 V
audio cable from the PA amplifier will not
carry any voltage!
3) Connect the speaker to the PA amplifier via
the Speakon
®
input jack (2). Connect the
Speakon plug as follows:
1−
2
−
2+
1+
1+ = positive pole of speaker
(marked core)
1− = negative pole of speaker
2+ and 2− not connected
4) Adjust the power rating with the selector
switch (1) on the rear side of the speaker.
5) EUL-2SUB / SW: The Speakon output jack
PAR. / SAT OUT (3) allows connection of an-
other 100 V speaker (e. g. EUL-2 / SW).
6) When connecting several speakers, make
sure that all speakers have the same polarity.
Subject to technical modification.
Technische Daten Specifications EUL-2 /SW EUL-2SUB /SW
Nennbelastbarkeit Power rating 50 / 37,5 / 25 / 12,5 W 120 / 90 / 60 / 30 W
Frequenzbereich Frequency range 70 – 19 000 Hz 38 – 250 Hz
Kennschalldruck SPL 95 dB (1 W/1 m) 95 dB (1 W/1 m)
Abmessung (B × H × T) Dimensions (W × H × D) 320 × 485 × 250 mm 420 × 430 × 445 mm
Gewicht Weight 8,7 kg 18,2 kg
Anschluss Connection Speakon
®
Speakon
®
Einsatztemperatur Ambient temperature 0 – 40 °C 0 – 40 °C
Rückseite • Rear side

Chat with your Monacor EUL-2SUB manual using AI

Get instant AI answers from your Monacor EUL-2SUB manual

Ask anything about the Monacor EUL-2SUB. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EUL-2SUB?

Yes No

Frequently Asked Questions

A

The EUL-2SUB schwarz covers 38–250 Hz, focusing on deep bass reproduction to complement full-range PA speakers.

Is this answer helpful?

A

Power down the PA amplifier first. Use the Speakon® input for the 100 V feed. Set the rear selector to the desired wattage tap. Optionally use the PAR./SAT Speakon output to feed an additional 100 V speaker.

Is this answer helpful?

A

Yes. Place the EUL-2SUB on the floor and use an adapter (e.g., PAST-28 / SW) in the top stand sleeve to mount an EUL-2 / SW or similar top cabinet at a safe distance above the subwoofer.

Is this answer helpful?

A

No. The EUL-2SUB schwarz is intended for indoor use only and must be protected from dripping or splashing water, high humidity, and extreme heat.

Is this answer helpful?

A

Installation must be performed by qualified personnel. There can be contact voltages up to 100 V on the speaker cable. Always switch off the PA amplifier before wiring and ensure correct speaker polarity to avoid amplifier overload.

Is this answer helpful?

A

The subwoofer offers 120 / 90 / 60 / 30 W taps. These let you match output to room size, amplifier capacity, and the number of speakers on the 100 V line to prevent overloading the amplifier.

Is this answer helpful?

A

Use only a dry, soft cloth for cleaning. Do not use water or chemical cleaners. Keep the unit in ambient temperatures between 0–40 °C and protect it from moisture to maintain performance and longevity.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Dedicated 30 cm (12") woofer with integrated low-pass crossover for true sub bass (38–250 Hz).
  • Multiple power taps (120 / 90 / 60 / 30 W) for flexible 100 V system balancing.
  • Speakon® input and PAR./SAT output for secure connections and easy chaining of satellites.
  • Designed to pair with EUL-2 / SW full-range cabinets for coherent system voicing.
  • Robust indoor-rated enclosure with clear installation options and 95 dB SPL sensitivity.
VS

Disadvantages

  • Indoor use only; not suitable for outdoor installations or wet environments.
  • Requires qualified installer due to up-to-100 V contact voltage on speaker lines.
  • Relatively heavy (18.2 kg), may need handling equipment for some installs.
  • No onboard amplification—needs compatible PA amplifier and 100 V line.
  • Limited frequency overlap control beyond the fixed integrated low-pass crossover.
M: OA-GPT-5-NAN

Product Specification

Woofer

1x 12"/12.00in

Amplification

passive

Frequency Range

38Hz-250Hz

Power Handling

120W RMS

Max. SPL

95dB

Dimensions

16.54x16.93x17.52in (WxHxD)

Weight

40.12 lb

M: OA-GPT-54-NAN

Product Description

Monacor EUL-2SUB schwarz — Powerful 100V Subwoofer for PA Systems

The Monacor EUL-2SUB schwarz is a dedicated 100 V subwoofer engineered to extend the low-end performance of public address and PA speaker setups. Designed to pair seamlessly with the EUL-2 / SW full-range cabinets, the EUL-2SUB delivers deep, controlled bass through a 30 cm (12") woofer and an integrated low-pass crossover. Housed in a robust black enclosure, it’s tailored for indoor installations where reliable low-frequency reinforcement is required.

Compact but substantial, the EUL-2SUB schwarz is built for installers and system integrators who work with 100 V distributed audio systems. With selectable power taps (120 / 90 / 60 / 30 W) and Speakon® connections for input and PAR./SAT output, the unit supports flexible deployment and daisy-chaining of additional 100 V speakers. The integrated crossover ensures the subwoofer focuses on deep frequencies (38–250 Hz), leaving mid and high frequencies to compatible full-range tops.

Installation is straightforward for qualified technicians. The subwoofer is intended to sit on the floor; a stand adapter (e.g., PAST-28 / SW) allows placing a matching EUL-2 / SW on top as a top box. Always power down the 100 V amplifier before connecting, observe correct polarity across speakers, and set the rear selector switch to the desired power tap. The Speakon output provides an easy route for adding a satellite speaker while maintaining correct 100 V wiring practice.

Key practical features include a nominal SPL of 95 dB (1 W/1 m), durable Speakon® connectors, and an operating temperature range of 0–40 °C. Weighing 18.2 kg and sized to integrate with PA setups, the EUL-2SUB schwarz balances performance and installability for venues that need reliable low-frequency presence without complex amplification schemes.

Whether used to augment voice intelligibility in large spaces, add punch to background music, or reinforce the low end in event audio, the EUL-2SUB schwarz is a pragmatic choice for 100 V PA systems. Its focused frequency band, clear power tap options, and compatibility with the EUL-2 / SW make it a practical subwoofer for fixed installations, halls, and multi-room systems.

Notes

  • For safety and performance, installation must be performed by qualified personnel experienced with 100 V systems. Always disconnect amplifier power before wiring.
  • Protect the unit from moisture and excessive heat; clean only with a dry soft cloth.
  • Dispose of the speaker at an appropriate recycling facility when decommissioned.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly