Manual.ly Logo

Monacor DRIVE Series Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-5-NAN
page

/ 4

Loading...
f8888cbb865a1ae559c239745b87897d90e6 page 3
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS
1 2
3
1 2
3
1 2
3
2 1
3
USE ONLY WITH A 250V FUSE
2 1
3
LINE IN B LINE OUT B
MIX OUT
MUSIC P WR SIG CLIPLOWCUTFLAT
MODE SYSTEM
LINE IN A
LINE OUT A VOLUME
0 dB
-∞
ON
OFF
FUSE
8
6
7
10
9
1
2
4
3
5
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
DRIVE-08A Order number 1000192
DRIVE-10A Order number 1000193
DRIVE-12A Order number 1000194
DRIVE-15A Order number 1000195
Active Speaker System
These instructions are intended for users
with basic knowledge of PA technology.
Please read the instructions carefully prior
to operation and keep them for later ref-
erence.
1 Applications
This 2-way speaker system of the DRIVE series
with integrated DSP-controlled 2-channel ampli-
fier is designed for a great variety of professional
sound applications. The speaker system can be
used, for example, as a floor monitor or set up
by means of a speaker stand via its stand sleeve.
For suspended installation, three M8 threaded
inserts are provided respectively on the top side
and on the left and right sides of the speaker
cabinet. For horizontal operation, the horn
tweeter can be turned by 90°.
2 Safety Notes
The product corresponds to all relevant directives
of the EU and is therefore marked with .
WARNING The product uses dangerous
mains voltage. Leave servicing to
skilled personnel. Inexpert han-
dling may result in electric shock.
•
The product is suitable for indoor use only.
Protect it against dripping water, splash water
and high air humidity. The admissible ambient
temperature range is 0 – 40 °C.
•
Do not place any vessels filled with liquid,
e. g. drinking glasses, on the product.
•
Do not use the product and immediately dis-
connect the mains plug from the socket
1. if the speaker system or the mains cable is
visibly damaged,
2. if a defect might have occurred after the
product was dropped or suffered a similar
accident,
3. if malfunctions occur.
Any repairs must be carried out by specialists.
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug.
•
For cleaning the product, only use a dry, soft
cloth; never use water or chemicals.
•
No guarantee claims for the product and no
liability for any resulting personal damage or
material damage will be accepted if the prod-
uct is not correctly used, if it is not set up safely
or not expertly repaired.
If the product is to be put out of oper-
ation definitely, dispose of the product
in accordance with local regulations.
3 Overview
1 Selector switch for the sound
MUSIC = for music reproduction
FLAT = linear response
LOWCUT = to suppress frequencies below
100 Hz
2 Input LINE IN A (XLR, bal.) to connect a signal
source with line level (e. g. mixer, preamplifier,
CD / MP3 player)
3 Feed-through output LINE OUT A
The signal of the input LINE IN A is available
at this output; this signal can be routed to
an additional active speaker system, for ex-
ample.
4 Input LINE IN B (XLR / 6.3 mm jack, bal.) to con-
nect a signal source with line level (e. g.mixer,
preamplifier, CD / MP3 player)
5 Feed-through output LINE OUT B
The signal of the input LINE IN B is available
at this output; this signal can be routed to
an additional active speaker system, for ex-
ample.
6 LED indicators
PWR = power LED
SIG = signal LED
CLIP = overload LED
7 VOLUME control
8 Output MIX OUT
The mixed signal of the two input jacks LINE
IN A and LINE IN B is available at this output;
its level is depends on the position of the
VOLUME control.
9 ON / OFF switch
10 Mains jack for connection to a mains socket
(230 V/ 50 Hz) via the mains cable provided
4 Connections
Before connecting / disconnecting, switch off the
speaker system or set the VOLUME control(7)
to the left stop (position “- ∞”) to prevent noise.
1) For signal input, the jacks LINE IN A (2) and
LINE IN B (4) are available. A line level signal
is required, e. g. from a mixer, preamplifier or
CD / MP3 player.
Stereo mode: Connect one stereo channel
each to a DRIVE speaker system via the jack
LINE IN A or LINE IN B.
Mono mode: For a stereo input signal, use
both input jacks; for a mono input signal, feed
the signal to one of the two input jacks.
2) To route the input signals (to another active
speaker system, for example), use the jacks
LINE OUT A and B (3, 5) or the jack MIX
OUT (8): At the jacks LINE OUT, the corre-
sponding input signal of the jacks LINE IN A
and B (2, 4) can be picked up. At the jack MIX
OUT, the mixed signal of the two input jacks
LINE IN is available. The level of the mixed sig-
nal depends on the position of the VOLUME
control(7).
English

Chat with your Monacor DRIVE Series manual using AI

Get instant AI answers from your Monacor DRIVE Series manual

Ask anything about the Monacor DRIVE Series. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend DRIVE Series?

Yes No

Frequently Asked Questions

A

Each unit has LINE IN A (balanced XLR) and LINE IN B (balanced XLR / 6.3 mm combo) for line-level sources, plus LINE OUT A/B feed-throughs and a MIX OUT that provides the summed signal of both inputs.

Is this answer helpful?

A

Yes. The horn tweeter can be rotated by 90° to optimise horizontal dispersion when the cabinet is used in a monitor or horizontally mounted configuration.

Is this answer helpful?

A

LOWCUT suppresses frequencies below ~100 Hz and is recommended when using an external subwoofer, when reducing low-frequency buildup on stage monitors, or when the application focuses on speech clarity.

Is this answer helpful?

A

The SIG LED indicates that an input signal is present at a significant level. The CLIP LED warns of amplifier overload or peaks; brief illumination is acceptable, but sustained CLIP requires reducing the volume to avoid distortion or damage.

Is this answer helpful?

A

They are designed for indoor use and must be protected from splash and high humidity. For outdoor use, provide adequate weather protection and ensure safe mains and grounding arrangements.

Is this answer helpful?

A

Always use the specified fuse rating, disconnect mains by the plug not the cable, keep liquids away, and have repairs performed only by qualified service personnel to avoid electric shock and maintain warranty coverage.

Is this answer helpful?

A

Use the LINE OUT feed-throughs to daisy-chain the corresponding input signals to other active cabinets, or use MIX OUT to send the summed signal; ensure proper gain staging and speaker placement for even coverage.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • DSP-controlled 2-channel amplifier for reliable, tailored crossover and protection.
  • Multiple input and feed-through options (XLR, combo jack, MIX OUT) for flexible routing.
  • Rotatable horn and M8 mounting points support versatile mounting and orientation.
  • Robust birch plywood cabinet balances durability with acoustic performance.
  • Clear front-panel controls and LED indicators for simple live operation and monitoring.
VS

Disadvantages

  • Intended for indoor use only; not weatherproof for outdoor deployments without protection.
  • Relatively heavy birch plywood cabinets can be cumbersome for frequent transport.
  • Requires correct fuse and mains handling; servicing must be done by qualified personnel.
  • No onboard wireless or digital inputs; limited to analog line-level connections.
  • Low-end extension varies by model; may require a dedicated subwoofer for deep bass.
M: OA-GPT-5-NAN

Product Specification

Type

2-Way

Tweeter

1x 1"/1in

Amplification

Active

Sensitivity

98dB

Dispersion Angle

90x60 deg

M: OA-GPT-54-NAN

Product Description

Monacor Drive-Active — Powerful, flexible active speaker

The Monacor Drive-Active is a professional 2-way active speaker series equipped with a DSP-controlled 2-channel amplifier. Designed for PA use, the Drive-Active models (Drive-08A, Drive-10A, Drive-12A, Drive-15A) cover a wide range of scenarios from floor-monitor duties to main PA roles. Each cabinet features balanced XLR inputs, feed-through outputs, a MIX OUT, rotary volume control, mode selector (MUSIC / FLAT / LOWCUT), and LED indicators for power, signal and clip. The tweeter horn can be rotated 90° for horizontal operation and each cabinet includes M8 threaded inserts for flown mounting or a stand sleeve for pole mounting.

The Drive-Active series emphasizes robust, user-friendly operation: protected mains circuitry (use only specified fuses), a clear front-panel layout, and practical connection options for stereo or mono setups. Units are intended for indoor use within 0–40 °C and are built in birch plywood enclosures to balance durability and acoustic performance. The DSP-driven crossover and onboard amplification deliver controlled frequency response and headroom, with LOWCUT mode available to integrate external subwoofers or optimize speech intelligibility.

Technical specs vary by model: power ratings range roughly from 140 W to 300 W nominal with peak capabilities up to 750 W, speaker sizes from 8" to 15" woofers, and frequency responses roughly 40–60 Hz up to 20 kHz depending on the model. Sensitivity is about 98 dB (1 W/1 m) with maximum SPLs around 122–125 dB. Inputs accept line-level sources via XLR (LINE IN A) and XLR/6.3 mm combo (LINE IN B). The MIX OUT provides a summed signal dependent on the main volume control, while LINE OUT jacks allow daisy-chaining to additional active cabinets.

Operation is straightforward: set MODE for the desired tonal character, connect sources, power on after sources, and adjust VOLUME while watching SIG/CLIP LEDs to prevent distortion. Safety guidance stresses indoor use, proper fuse and mains handling, avoiding liquids, and professional servicing for faults. The product complies with EU directives and includes disposal guidance per local regulations.

Notes:

  • Rotate the horn 90° for horizontal placement or use M8 points for flown installs.
  • Use LOWCUT when deploying a subwoofer or for clearer speech reproduction.
  • Always start with VOLUME at minimum to avoid switch-on noise and protect hearing.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly