• This product complies with the EMC Directive below. Note that in environments where electromagnetic interference
exceeds EMC requirements dened in this directive, appropriate countermeasures are required to assure the product
performance.
• The display of this instrument may icker or disappear temporarily due to electromagnetic interference caused by
electrostatic discharge. However, it will return to the regular display once the interference is removed.
CE marking --------------------------------------------------------------------------------------------------------------
EMC Standard EN 61326-1 Immunity test requirement: Clause 6.2 Table 2
Emission limit: Class B
RoHS Directive EN IEC 63000
Precautions for Use ----------------------------------------------------------------------------------------------------
• Be sure to perform reference point adjustment by following points to notice below.
- Do not perfom the adjustment at sites where the temperature will change abruptly. Thermally stabilize the instrument
sufciently at room temperature.
- Wipe oil and dust off the both measuring faces and master gage using a gauze or chamois skin.
• Before using this product for the rst time, wipe the rust preventive oil from the product with a soft cloth soaked with
cleaning oil, and install the supplied battery.
• If rust preventive oil oil is dried, the product might not operate smoothly. Wipe a sliding surface with a cloth and then
apply a little oil to use the product. This can make the product operate smoothly.
• The thumb roller is a ne feeding device, and not a constant-force device. Measuring force tends to be large when
measuring with the thumb roller. Carefully apply an appropriate and even measuring force when using the thumb roller.
• If the instrument will not be used for more than three months, remove the battery from and store it properly. Otherwise,
liquid may leak from the battery and damage the instrument.
• After use, take corrosion prevention measures. Corrosion can cause the instrument to malfunction.
KEEP THIS MANUAL FOR FUTURE REFERENCE.
For more information, refer to https://manual.mitutoyo.co.jp.
IP67 ABS DIGIMATIC Messschieber mit gerundeten
Messflächen für Innen- und Außenmessung,
kühlmittelresistente Messschieber
►Sicherheitshinweise
Um die Sicherheit des Anwenders zu gewährleisten, ist das Gerät unter Befolgung der in vorliegender
Bedienungsanleitung aufgeführten Anweisungen und Spezikationen zu bedienen. Die Nichteinhaltung der
Anweisungen kann die Sicherheit beeinträchtigen.
►Hinweise zur Exportkontrolle
Begehen Sie keine Handlungen, die bezüglich der Ausfuhr oder Wiederausfuhr von Waren direkt oder indirekt gegen
die Gesetze oder Vorschriften Japans, Ihres Landes oder eines anderen internationalen Vertrages verstoßen könnten.
• Bewahren Sie Batterien/Akkus stets außerhalb der Reichweite von Kindern auf. Im Falle eines Verschluckensist sofort ein Arzt zu konsultieren.
• Batterien dürfen niemals kurzgeschlossen, zerlegt, oder verformt werden oder mit extremer Hitze oder Flammen in Berührung kommen.
• Wenn alkalische Batterieüssigkeit in die Augen gelangt, spülen Sie die Augen sofort mit sauberem Wasser aus und suchen Sie einen
Arzt auf. Wenn alkalische Batterieüssigkeit in Kontakt mit der Haut kommt, spülen Sie den freiliegenden Bereich gründlich mit
sauberem Wasser.
• Unternehmen Sie keinen Versuch, die Primärbatterie aufzuladen oder den Plus- und Minus-Anschluss beim Einbau umzukehren. Eine unsachgemäße
Handhabung oder Montage der Batterie kann dazu führen, dass die Batterie explodiert oder ausläuft sowie zu schweren Körperverletzungen oder Fehlfunktionen.
• Handhaben Sie die scharfen Messächen dieses Produkts stets mit Vorsicht, um Verletzungen zu vermeiden.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten (unter
Nutzung der in der Europäischen Union und in den anderen europäischen
Ländern vorgesehenen Mülltrennsysteme)
Dieses Symbol auf dem Produkt oder seiner Verpackung basiert auf der WEEE-Richtlinie (Richtlinie zu Elektro- und
Elektronik-Altgeräten), die in den EU-Mitgliedstaaten rechtlich verbindlich ist. Darin wird darauf hingewiesen, dass
dieses Produkt nicht als Haushaltsabfall zu behandeln ist.
Um die Auswirkungen auf die Umwelt zu verringern und das Deponievolumen zu minimieren, unterstützen Sie bitte
Wiederverwertung und Recycling.
Bitte wenden Sie sich an Ihren Händler oder das nächstgelegene Mitutoyo-Verkaufsbüro, um Anweisungen zur
Entsorgung des Produkts zu erhalten.
EU
Hg
Entsorgung von Altbatterien- und Akkus (gilt für die Europäische Union und
andere Staaten mit Systemen zur separaten Entsorgung)
Batterien und Akkus, die Schwermetalle wie Quecksilber, Blei und Kadmium enthalten, verursachen bei
unsachgemäßer Entsorgung Schadstoffbelastungen der Umwelt. Wenn sie verbrannt werden, werden bestimmte
Chemikalien in die Luft freigesetzt oder in den Ascherückständen des Verbrennungsprozesses konzentriert. Diese
können zu Gesundheitsrisiken für Menschen und Tiere führen und auch die Umwelt insgesamt schädigen.
Zur Einhaltung der gesetzlichen Bestimmungen wurden die Batterie bzw. die Verpackung mit dem Symbol einer
durchgestrichenen Abfalltonne markiert. Dieses Symbol weist darauf hin, dass die Entsorgung von Batterien als
Hausmüll strikt untersagt ist. Stattdessen müssen die Batterien gemäß separaten Sammel- und Recyclingvorschriften
entsorgt werden. Eine zusätzliche Markierung weist auf den in der Batterie enthaltenen Schwermetallgehalt hin
(z.B. Cd = Cadmium, Hg = Quecksilber, Pb = Blei), wenn dieser vorgeschriebene Werte überschreitet. Endverbraucher
sind gesetzlich verpichtet, Altbatterien vorschriftsmäßig zu entsorgen. In den Mitutoyo-Niederlassungen und
Vertragshändlern stehen Sammelbehälter zur kostenlosen Rücknahme bereit.
Timed to your purchase date. Always free, unsubscribe anytime.
M: QW-35-FL
Ask a Question
0/1000
Do you recommend ABS?
YesNo
Frequently Asked
Questions
A
It covers a 0 to 750 mm range (or equivalent in inches), allowing external, internal, depth, and step measurements across large workpieces while maintaining Mitutoyo accuracy standards.
Is this answer helpful?
A
ABS stands for Absolute (Digimatic) encoder. It retains the zero reference after power-off, lets you switch instantly between absolute and incremental modes, and eliminates repetitive origin-setting for faster, more reliable measurements.
Is this answer helpful?
A
Yes. The model is designed to IP67 standards for coolant-proof and dust-resistant performance, suitable for machining environments with splashes, coolant, and particulate exposure.
Is this answer helpful?
A
Wipe off the supplied rust-preventive oil before first use, apply a little oil to sliding surfaces if needed, avoid excessive force with the thumb roller, remove the battery for storage over three months, and follow corrosion-prevention procedures after use.
Is this answer helpful?
A
Install the supplied battery with correct polarity. Do not short, disassemble, or heat batteries. Remove batteries for long storage to avoid leakage. Dispose of batteries and the instrument per WEEE and local battery recycling regulations.
Is this answer helpful?
A
Strong electromagnetic interference or electrostatic discharge can cause the display to flicker or temporarily disappear; normal function returns after the interference is removed. Take appropriate countermeasures in high-EMI environments.
Is this answer helpful?
A
Yes. The thumb roller is a fine-feed device, not a constant-force tool. Use gentle, even pressure—excessive force can increase measurement error. For consistent results, apply an appropriate and steady measuring pressure.
Is this answer helpful?
M: OA-GPT-5-NAN
Advantagesand
Disadvantages
Advantages
Large 0–750 mm measuring range covers most workshop needs while maintaining high accuracy.
ABS Digimatic system provides instant ABS/INC switching and keeps zero reference after power-off.
IP67 coolant-proof construction resists splash, dust, and temporary immersion for harsh environments.
Rounded and nib-style jaws enable versatile external, internal, depth, and narrow-slot measurements.
Clear digital readout with metric/inch selection and thumb roller for precise fine feed control.
VS
Disadvantages
Large size can be less convenient for quick handheld checks compared with smaller calipers.
Thumb roller can increase measuring force if used improperly, affecting repeatability.
Battery leakage risk if stored long-term with battery installed; requires removal for storage.
Display may flicker or temporarily blank under strong electromagnetic interference.
Initial rust-preventive oil must be cleaned off before first use, adding a setup step.
M: OA-GPT-5-NAN
Product
Specification
Material
Plastic, Stainless Steel
Units of Measurement
imperial
Measuring Range
0-29.53in, Graduation 0.00039in
Accuracy
±0.06"
Display
yes
Special Features
Automatic Shut-off, Locking Screw
Power Supply
Battery operated (1x button cell)
Weight
3.11lb
M: OA-GPT-54-NAN
Product
Description
Mitutoyo ABS Digital Caliper 0-750mm — Precision, Durability, and Coolant Resistance
The Mitutoyo ABS Digital Caliper 0-750mm is a high-accuracy measuring instrument designed for shop, laboratory, and field use. Engineered with Mitutoyo’s ABS (Absolute) Digimatic system and IP67 coolant-proof construction, this caliper provides reliable, repeatable measurements across a wide 0–750 mm range. Its digitized ABS encoder enables instant switching between absolute (ABS) and incremental (INC) modes, eliminating the need for origin-setting on every power cycle and making measurements faster and less error-prone.
Featuring rounded measuring faces and optional nib-style jaws for narrow or inside measurements, the caliper adapts to many tasks: external, internal, depth, and step measurements. The robust stainless sliding mechanism, thumb roller for fine feed, and corrosion prevention instructions in the manual ensure smooth operation and long service life. IP67 sealing means the instrument resists coolant, splash, dust, and temporary immersion, making it suitable for machining environments where contaminants are present.
Mitutoyo’s design includes clear digital readout with metric/inch selection, reference-point adjustment guidance, and careful battery handling and disposal recommendations. Users are advised to remove batteries if the caliper will be stored for more than three months to prevent leakage, to clean anti-rust oil before first use, and to maintain sliding surfaces with light oil for optimal performance. The manual also highlights electromagnetic compatibility (EMC) standards compliance and cautions that strong electromagnetic interference can cause temporary display disruptions.
This caliper is built with safety and regulatory compliance in mind: WEEE and battery disposal symbols, RoHS conformance, CE marking, and export-control cautions are included. The package typically includes the battery and a user manual with instructions for reference-point setting, cleaning, thumb-roller usage, and corrosion prevention. Overall, the Mitutoyo ABS Digital Caliper 0-750mm balances precision measurement capabilities with rugged features needed for demanding industrial environments.
Notes
Clean off rust-preventive oil before first use and install supplied battery.
Remove the battery for storage longer than three months.
Avoid measuring with excessive force using the thumb roller; it is a fine-feed device, not a constant-force mechanism.
Dispose of batteries and electronics following local WEEE and battery recycling rules.