Manual.ly Logo

Micron DDR5 ECC UDIMM Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: QW-35-FL
page

/ 20

Loading...
01a8d2e592a701b7b7658543a3bc564a3c76 page 1
288-Pin DDR5 UDIMM Core
Product Description
CCM005-802248454-12 Micron Technology, Inc. reserves the right to change products or specifications without notice.
ddr5_udimm_core.pdf - Rev. E 10/21 EN © 2020 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
1
DDR5 SDRAM UDIMM Core
Product Description
This specification defines the electrical and mechanical
requirements for 288-pin, 1.1V (V
DD
) double data rate,
synchronous DRAM, unbuffered memory modules
(DDR5 SDRAM UDIMMs). These DDR5 UDIMMs are
intended for use as main memory when installed in PCs.
Some specifications are part number-specific; refer to
the module data sheet addendum of the specific Micron
part number (MPN)
for the complete specification.
Notes: 1. Attributes shown in this table are for reference only and do not necessarily reflect the same options supported by
Micron. Please refer to the MPN-specific module addendum for supported features for the MPN.
Features
• DDR5 functionality and operations supported as de-
fined in the component data sheet
• 288-pin UDIMM
• Sideband access with I3C-basic/I2C support
• Two
independent I/O sub channels for increased
bandwidth
• Gold edge contacts
• Halogen-free
• Fly-by topology
• Terminated clock, control and command/address
bus
Table 1: Product Family Attributes
Parameter Options Notes
DIMM organization x64, x72 ECC Two 32-bit sub-channels (non-ECC), two
36-bit sub-channels (ECC)
DIMM dimensions (nominal) 133.35mm x 31.25mm Refer to Module Dimensions
Pin count 288
DDR5 SDRAM densities supported 16Gb, 24Gb, 32Gb, 64Gb 78/82-ball FBGA package for
x4/x8 devices
Capacity 8Gb–128GB
DDR5 SDRAM width x8, x16
Data transfer rate PC5-3200 to PC5-5600 Refer to Key Timing Parameters
Serial presence detect hub w
ith tem-
perature sensor
1024 byte
Voltage (external supply, nominal) V
IN_Bulk
: 5V Bulk input DC supply voltage from sys-
tem
Voltage (PMIC output) V
DD
: 1.1V Supply voltage from PMIC
V
DDQ
: 1.1V I/O Supply voltage from PMIC
V
PP
: 1.8V Pump voltage from PMIC
1.8V LDO output From PMIC to HUB
1.0V LDO output
Interface 1.1V signaling
DRAM operating temperature T
OPER
= 0 to 95°C Refer to Thermal Characteristics
ddr5_udimm_core.ditamap Page 1

Chat with your Micron DDR5 ECC UDIMM manual using AI

Get instant AI answers from your Micron DDR5 ECC UDIMM manual

Ask anything about the Micron DDR5 ECC UDIMM. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend DDR5 ECC UDIMM?

Yes No

Frequently Asked Questions

A

The Micron ECC DIMM DDR5 supports data transfer rates ranging from PC5-3200 to PC5-5600 MT/s, depending on the specific speed grade selected.

Is this answer helpful?

A

Yes, the module includes ECC (Error Correction Code) functionality, which detects and corrects common types of internal data corruption to ensure reliability.

Is this answer helpful?

A

The Power Management Integrated Circuit regulates voltage internally, reducing electrical noise and improving power efficiency, which leads to more stable system performance.

Is this answer helpful?

A

No, this DDR5 module requires a motherboard specifically designed for DDR5 memory slots and support for the new voltage standards and pinout.

Is this answer helpful?

A

The normal commercial operating case temperature range is 0 to 85 degrees Celsius, though the device can operate up to 95 degrees Celsius with specific refresh adjustments.

Is this answer helpful?

A

Yes, an integrated thermal sensor continuously monitors the module's temperature and reports data to the host system via the sideband bus.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports high data transfer rates up to 5600 MT/s for exceptional speed
  • Integrated ECC technology ensures data accuracy and system stability
  • On-module PMIC provides efficient power management and reduced noise
  • Fly-by topology enhances signal integrity at high frequencies
  • Real-time thermal monitoring via integrated sensor protects hardware
VS

Disadvantages

  • Requires a compatible motherboard with DDR5 support to function
  • Operating temperatures may require robust cooling solutions
  • Higher cost compared to previous generation DDR4 memory modules
  • Strict voltage requirements necessitate careful system configuration
  • Not suitable for automotive or critical safety applications without designation
M: QW-35-FL

Product Specification

Type

DDR5 DIMM 288-Pin, ECC, on-die ECC

Clock Speed

4800MHz

JEDEC

PC5-38400E

CAS Latency CL

40 (equivalent to ~16.67ns)

Row-to-Column Delay tRCD

39 (equivalent to ~16.25ns)

Row Precharge Time tRP

39 (equivalent to ~16.25ns)

Voltage

1.1V

Module Height

1.26 inches

Heatsink

N/A

Lighting

N/A

Features

Standard SPD

Warranty

36 months

M: QW-35-FL

Product Description

Micron ECC DIMM DDR5: The Future of High-Speed Computing

The Micron ECC DIMM DDR5 represents a significant leap forward in memory technology, designed to meet the demanding needs of modern personal computers and high-performance workstations. This 288-pin unbuffered memory module integrates advanced features that ensure data integrity and superior speed. By utilizing a 1.1V supply voltage managed by an on-module Power Management Integrated Circuit (PMIC), this memory solution offers enhanced efficiency compared to previous generations. The architecture supports two independent I/O sub-channels, effectively doubling bandwidth potential and allowing for smoother multitasking and faster data processing.

Engineered with a fly-by topology, the clock and control signals are routed to improve signal quality at higher speeds, minimizing interference and ensuring stable operation even at data rates ranging from PC5-3200 up to PC5-5600 MT/s. The inclusion of Error Correction Code (ECC) provides a critical layer of protection against data corruption, making it ideal for applications where reliability is paramount. Furthermore, the module features an integrated thermal sensor and an SPD EEPROM hub, allowing the system to monitor temperature in real-time and adjust performance accordingly to maintain optimal conditions.

Key Features and Benefits

This DDR5 UDIMM is not just about raw speed; it is about intelligent design. The gold edge contacts ensure a reliable connection over time, while the halogen-free construction reflects a commitment to environmental standards. The PMIC allows for precise voltage regulation, converting the standard 5V bulk input into the specific voltages required by the DRAM chips. This internal power management reduces electrical noise and improves overall system stability. Whether you are building a gaming rig or a professional workstation, the Micron ECC DIMM DDR5 delivers the consistency and performance required for complex tasks.

Important Notes

  • Always verify compatibility with your motherboard before installation.
  • Ensure adequate cooling solutions are in place as operating temperatures can reach up to 95°C under load.
  • Use only authorized distributors to guarantee product authenticity and warranty coverage.
M: QW-35-FL

© Copyright 2026 Manual.ly