Manual.ly Logo

Mennekes AMTRON Compact 2.0 C2 Manual

0.0 · 0 Ratings

PDF manual · 312 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 312

Loading...
f3317c787b45dc2d9c4ff29651961e0d29e3 page 20
2
1 About this document
The charging station is hereinafter referred to as
“product”. This document applies to the following
product variants:
n AMTRON® Compact 2.0 11
n AMTRON® Compact 2.0 22
This document provides information for the quali-
fied electrician and the operator. It contains import-
ant instructions for the installation and proper use
of the product.
Copyright ©2022 Mennekes Elektrotechnik GmbH
& Co. KG
1.1 Contact
Website: https://www.chargeupyourday.com/
Service partner
If you have questions concerning the product,
please contact your responsible service partner. On
our website under “Search for Partners” you will
find qualified contacts in your region.
MENNEKES
Please use the form on our website under “Con-
tact” to contact MENNEKES directly.
FAQ
Further information on the subject of electromobility
is provided on our website under “FAQ”.
1.2 Warning notices
Warning of personal injury
DANGER
This warning notice indicates imminent danger that
will result in death or severe injuries.
WARNING
This warning notice indicates a dangerous situation
that can result in death or severe injuries.
CAUTION
This warning notice indicates a dangerous situation
that can result in minor injuries.
Warning of material damage
ATTENTION
This warning notice indicates a dangerous situation
that can result in material damage.
1.3 Symbols used
The activities marked with this symbol may
only be carried out by a qualified electri-
cian.
This symbol indicates an important note.
This symbol is used to point out supple-
mental, useful information.
ü This symbol is used to point out a requirement.
u This symbol is used to point out a call for action.
ð This symbol is used to point out a result.
n This symbol indicates a listing.
1 Das Symbol verweist auf ein anderes Dokument
oder auf eine andere Textstelle in diesem Doku-
ment.

Chat with your Mennekes AMTRON Compact 2.0 C2 manual using AI

Get instant AI answers from your Mennekes AMTRON Compact 2.0 C2 manual

Ask anything about the Mennekes AMTRON Compact 2.0 C2. Answers come from this manual, with the pages they are based on.

AMTRON Compact 2.0 C2 Maintenance Schedule

Remind me when maintenance is due
Every 6 months
Inspect exterior housing

Visually inspect for defects and damage. Check product for cleanliness and clean if necessary.

Show in the manual (page 25)
Every 6 months
Inspect interior housing

Check for foreign objects and remove them. Inspect for dryness and remove moisture from seals.

Show in the manual (page 25)
Every 6 months
Check wall mounting

Verify fastening on the wall or stand system and tighten screws if necessary.

Show in the manual (page 25)
Every 6 months
Inspect protective devices

Visually inspect protective devices for damage.

Show in the manual (page 25)
Every 6 months
Check LED info panel

Verify function and readability of the LED information panel.

Show in the manual (page 25)
Every 6 months
Inspect charging cable

Check for damage such as kinks or cracks. Clean and remove foreign objects if necessary.

Show in the manual (page 25)
Yearly
Tighten terminals

Check supply line terminals and retighten if necessary.

Show in the manual (page 25)
Yearly
Inspect electrical system

Perform inspection per IEC 60364-6, repeat measurements, and conduct functional test with charging simulation.

Show in the manual (page 25)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AMTRON Compact 2.0 C2?

Yes No

Frequently Asked Questions

A

The Amtron Compact 2.0 offers 11 kW or 22 kW models. Choose based on grid connection.

Is this answer helpful?

A

Yes, IP44 protection class allows outdoor mounting.

Is this answer helpful?

A

No, a 7.5-meter Type 2 cable is permanently attached to the device.

Is this answer helpful?

A

Yes, use DIP switches to set the maximum current from 6 to 32 amps.

Is this answer helpful?

A

It has DC monitoring but requires an external Type A RCD for AC protection.

Is this answer helpful?

A

Use the LED info panel to see standby, charging, or fault signals.

Is this answer helpful?

A

Yes, regular checks by an electrician are recommended for safety compliance.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Robust design with IP44 rating suitable for indoor and outdoor use.
  • Includes 7.5 meter permanently attached cable for convenience.
  • Sleep mode reduces standby power consumption to approximately one watt.
  • Configurable via DIP switches for local load management.
  • Clear LED status indicators communicate fault or standby states easily.
VS

Disadvantages

  • No internal residual current device requiring external type A installation.
  • Requires wall mounting or stand system not compatible with mobile use.
  • Installation must be performed by a qualified electrician only.
  • No integrated circuit breaker necessitating external fuse protection.
  • Maximum current setting limited by configuration and grid capacity.
M: qwen/qwen3.5-flash-20260224

Product Specification

Number of Charging Points

1

Charging Mode

IEC 61851-1 (Mode 3)

Number of Phases

3-phase

Voltage

400V (AC)

Connector Type

Type 2

Cable Length

24.61 ft

Mounting Type

Wall Mount

Authorization

No

Ingress Protection

IP44

Dimensions

8.15x14.21x5.75in (WxHxD)

M: qwen/qwen3.5-flash-20260224

Product Description

Mennekes AMTRON Compact 2.0 Overview

The Mennekes AMTRON Compact 2.0 represents a robust solution for residential electric vehicle charging. Designed with versatility in mind, this unit supports both single-phase and three-phase connections to accommodate various grid setups. Users seeking detailed technical guidance often reference the Mennekes AMTRON Compact 2.0 C2 Manual to ensure proper wiring and safety compliance during installation. The charging station is built to withstand outdoor conditions effectively with an IP44 rating and high mechanical impact resistance. This ensures durability against weather exposure and accidental bumps common in driveway or parking areas.

Key Features

Equipped with a permanently attached type 2 charging cable measuring 7.5 meters, convenience is prioritized to avoid extra clutter. The integrated cable hangs allows for neat organization when not in use. Status is clearly communicated via a bright LED info field indicating standby, charging, or fault states. Color coding helps distinguish between normal operation and errors easily. Power output options range from 11 kW for standard setups up to 22 kW for faster charging sessions. The unit features a sleep mode that minimizes standby power consumption to approximately one watt, promoting energy efficiency even when idle. This feature helps reduce electricity bills for users charging primarily during off-peak hours.

Configuration and Safety

Flexibility in power delivery is achieved through DIP switches, allowing qualified electricians to adjust the maximum charging current to suit specific breaker capacities. Security features include DC residual current monitoring greater than six milliamperes. It is important to note that the product requires external protective devices such as a type A residual current device and a suitable circuit breaker rated according to the model. The housing is constructed from durable AMELAN materials suitable for rugged environments. Safety warnings are prominently displayed to prevent misuse and ensure personal protection during handling. Regular maintenance checks are essential to identify potential wear on connectors or casing.

Installation and Usage

Wall mounting is the standard configuration, ensuring accessibility while keeping it secure from ground-level impacts. Regular inspection by a qualified specialist is recommended to maintain safety standards. The system supports local load management through external inputs, allowing integration with home energy management systems. This allows for dynamic adjustments based on available solar power or electricity tariffs. Whether for private homes or small business sites, this charging point offers a reliable and configurable method for electric mobility. Always adhere to national regulations when connecting the unit to ensure legal compliance and insurance validity during operation.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly