Manual.ly Logo

Mavic E-Deemax S 30 Manual

0.0 · 0 Ratings

PDF manual · 39 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 39

Loading...
599ea86251280c66fad51936ce9f5f32a767 page b
The Mavic
®
team has put all its energy, experience and
expertise into designing and building your wheel. The
recommendations in this user guide are applicable to
all wheel types (road, MTB, track, etc.) and the original
accessories supplied. Mavic
®
products are available only from
approved Mavic
®
dealers.
BEFORE USING THE WHEELS AND ACCESSORIES, READ THE FOLLOWING
INSTRUCTIONS AND ANY SPECIAL USER GUIDES PROVIDED CAREFULLY
(ALSO AVAILABLE ON www.mavic.com). KEEP THE INSTRUCTIONS IN A
SAFE PLACE AND PASS THEM ON TO POTENTIAL BUYERS AND USERS.
SAFETY WARNINGS
Cycling involves inherent risk of serious or possible fatal injury.
If you fail to follow these instructions you are putting yourself at risk
of serious or possible fatal injury.
If you are in any doubt about how to use, assemble, maintain, repair
or replace original parts, please consult your approved Mavic
®
dealer.
Use your common sense. Be vigilant and follow the traffic safety rules
during the day and in the dark (lights and reflectors). Modify your
riding behavior according to the weather.
For safe riding, you are recommended to wear a helmet, protective
clothing and visibility equipment.
Your Mavic
®
wheels can be used only with Mavic
®
quick releases.
Before each use, check the quick release adjustment as described
in sections 9 and 10, make sure that the wheels are not buckled
or dented, and check the wear of the brake pads, rims, composite
components and tyres. If you are in any doubt, consult your approved
Mavic
®
dealer.
Do not make any changes to your wheels (spoke tension,
components, etc.). Even minor changes to your wheels can damage
them and involve potential risk.
In a descent, use discontinuous and front-rear balanced braking
to limit the heat generated on the wheel as this can result in damage
to the rim, the inner tube or the tyre.
All components undergo mechanical aging (high forces and fatigue)
which can alter their strength. Any cracking, scratch or color change
may indicate the end of a product’s service life, causing it to suddenly
fail resulting in injuries, and should be replaced.
If you fall or have an accident, it is essential to have your wheel
checked by your approved Mavic
®
dealer even if there are no visible
signs of damage. In the event of an impact, wheels with composite
components must be returned to the Mavic
®
MSC After Sales Service
for inspection by your dealer.
Use a disc brake wheel only on a bicycle designed for disc brakes.
A UST
®
Tubeless wheel must be fitted only with a UST
®
Tubeless tyre,
otherwise the tyre may roll off the rim.
IMPORTANT INFORMATION
Every Mavic
®
wheel is intended for the following uses only:
- in the discipline stated on www.mavic.com. For example: a cross-
country racing wheel on a cross-country circuit, etc.
- on a track bike, a road bike or an MTB – not suitable for other types
of bike such as tandems, cyclo-cross, etc. (unless expressly stated
otherwise in writing by Mavic
®
).
Mavic
®
wheels may have a weight limit for the cyclist and equipment.
Ask your approved Mavic
®
dealer for advice.
Check the wear of the braking surfaces on the rim regularly. Replace
the rim if it is worn. Inspect the inside (especially under the rim tape
if there is any) and outside of the rim, looking for signs of fatigue or
wear – deterioration of the braking surfaces, cracks in the sidewalls
or where the spokes are attached.
All equipment (in particular the brake discs) must be tightened to the
specified torques by your approved Mavic
®
dealer, using a torque
wrench.
Use Mavic
®
spare parts only (especially tyres, inner tubes, brake
pads), supplied and fitted by your approved Mavic
®
dealer.
INSTRUCTIONS
When reading these instructions please refer to the illustrations
provided.
1 & 2 Fitting the rim tape
You are recommended to replace the rim tape whenever you change
the tyre or once a year if the wheel is in use, regardless of the
distance covered.
3. Compatibility and tyre pressure (clinchers and tubulars)
If your wheel is supplied with a Mavic tyre, please refer to the
attached user guide.
Before each use, make sure that the tyre is compatible with your
wheel and that it does not affect toe clearance.
When you inflate your tyres, observe the maximum pressure stated
on the tyre or rim. If different pressures are indicated, use the lower
pressure as the tyre may otherwise roll off the rim or the rim may
be damaged.
Before each use, make sure that the tyre is correctly seated. If a tyre
is too easy to fit, it may be dangerous when it is in use.
If you use anti-puncture sealants, it is essential to follow the
manufacturer’s instructions. Some of these products may affect the
rims and the tyres, and Mavic cannot accept responsibility for any
damage caused.
Use plastic tyre levers only.
Use butyl inner tubes. Do not use latex inner tubes.
For instructions on gluing a tubular to your wheel, refer to the user
guide for the tubular and the glue.
For composite wheels, use tubular glue that is resistant to the heat
generated on the rim by braking.
4. Fitting and using the valve extender
5. UST
®
valves
6. Compatibility of cassettes/free wheels
7. Fitting the cassette
8. Fitting the brake discs
If your wheels are supplied with disc screws, always use these
screws.
A: tightening torque of screws (5N.m)
B: tightening torque of Center Lock nuts (40N.m)
Center Lock: disc system licensed by Shimano
®
Inc.
9. Tightening the track wheel
10. Tightening devices
Your Mavic
®
wheels can only be used with Mavic
®
tightening
devices (quick releases or axles).
If you fail to tighten your quick release correctly (or sufficiently), you run the
risk of serious and possible fatal injury.
Always check that your quick release is compatible with your wheel.
Make sure that the fork material on your bike is compatible with quick
releases material– if you are in any doubt, consult your approved Mavic
®
dealer.
Do not use (front and rear) forks if the fork ends are less than 4 mm in
width. After assembly, check that your fork is compatible with Mavic quick
releases as described in the section below ASSEMBLY AND TIGHTENING.
Check that the quick releases are securely tightened every time you ride
the bike, especially if you have carbon fiber fork ends.
Do not make changes to or try to remove the retention lips (or any other
retention system) if your fork has them.
Mavic quick releases are not compatible with fork ends made of titanium
or any other harder material.
Every time you use your bike, make sure that the wheels are securely
fixed to the frame and fork – give a sharp tug on the wheel to check
that the quick release is tightened correctly. The wheel should not move
or come off.
You must use the adjusting nut – not the lever – to tighten or loosen the
quick release.
ASSEMBLY AND TIGHTENING OF QUICK RELEASES
Quick releases are designed to be operated by hand.
Never use a tool to tighten or loosen the mechanism as this may cause
damage.
If it is too easy to move the quick release lever to the CLOSE position, the
wheel will not be secured with sufficient clamping force.
Make sure that the hub of the wheel is fully engaged and centered within
the fork (front) or frame (rear). Move the lever to the OPEN position and
tighten the adjusting nut (not the lever) to increase the
clamping force.
Push the quick release lever to the CLOSE position.
If the clamping force is too great and the lever cannot be
moved to the CLOSE position, move the lever to the OPEN
position and loosen the adjusting nut (not the lever) to
slightly reduce the clamping force.
Repeat until the lever can be pushed to the CLOSE position.
Do not forget to re-attach the brake cables if necessary.
When you have finished setting the adjusting nut, the end
of the quick release skewer must not be more than 5mm
inside the adjusting nut (viewed from the outside).
In the CLOSE position, do not turn the lever like a wingnut.
When the quick release is in the CLOSE position, it must
leave a permanent mark on the fork ends. If it does not,
the clamping force is insufficient and you should repeat the
adjustment steps.
In the CLOSE position, the lever must not touch any other
part of the bicycle.
Every time the wheel is attached, check that the front wheel
is correctly centered on the front fork and that the rear wheel is centered
in the frame.
11. Brake pad adjustment
Wet weather reduces visibility and grip and increases braking distances
– the rider must reduce speed and anticipate braking.
If you are in any doubt about the instructions below, consult your
approved Mavic
®
dealer.
Check the brake pad surfaces for any signs of oil, grease, foreign
particles (gravel, metal filings, etc.). If necessary clean the brake pad
surfaces by rubbing them with medium sandpaper.
Regularly check the brake pad wear indicator. Replace brake pads
when necessary.
If the brake pads are supplied with the wheel, they must only be
replaced with an identical Mavic
®
model (go to www.mavic.com for
reference numbers).
To guarantee effective braking, only use brake pads specifically
designed for the braking surfaces on the rim (UB Control
®
, Céramic
®
,
Exalith
®
, carbon fiber, etc.). Remember that braking performance
changes depending on the interaction between the various brake pads
and rims. Some brake pads can cause the rims to wear out more quickly.
Newly installed brake pads may make a noise when they touch the rim.
This will stop after a run-in period.
After brake pads have been used with an aluminum rim, they should
never then be used with a composite rim.
Adjust the brake pads as shown in the table.
12. Bearing adjustment
QRM+: To adjust the bearing play, leave the wheel on the bike and use
the hub wrench supplied with the wheel. If there is any play, tighten
the screw until it disappears. If the wheel does not spin freely, undo
the screw slightly.
QRM: QRM hubs are adjusted in the factory in order to optimize
performance and prevent premature wear.
QRM SL: Adjust the quick release closing force until the wheel has no
more play.
If you are in any doubt, if you cannot remove the play, or if the force
seems to be too small or too great, consult your approved Mavic
®
dealer.
13. Fitting wheels to your frame
Check that the wheel is compatible with your frame and fork (wheel
diameter and clearance in between the wheel and frame, hub, tire
dimensions).
If your MTB wheel has an adapter on the hub, make sure it is positioned
correctly every time you remove the wheel.
Whenever you adjust the wheels, check that the front wheel is centered
in the front fork and that the rear wheel is centered in the frame.
If you are in any doubt, consult your approved Mavic
®
dealer.
MAINTENANCE
Every year, have your free wheel system, brakes and quick releases
checked by your approved Mavic
®
dealer.
The wheel components must be lubricated only by your approved
Mavic
®
dealer.
Never clean your wheels using a high pressure washer or abrasive
sponge. Use only soap and water. To prevent rust, wipe down after
washing or rain.
Solvents, detergents, paints, abrasives and adhesives can damage
composite wheels. The damage caused is often invisible. Do not use
your wheels if they have been exposed to these substances.
High temperatures can damage the wheels. Do not leave the wheels
in a car or close to a direct or indirect source of heat (vehicle muffler,
radiator, etc.). Do not hang up your bike by the wheel.
Clean the braking surfaces of your wheel regularly (except for rims
with carbon fiber and Exalith braking surfaces), preferably using the
Mavic
®
abrasive rubber rim stone to remove traces of brake pads and
other soiling.
Warranty conditions and customer service department on
www.mavic.com
ENU
Change Clean Lubricate Check Adjust Yourself
Your approved
Mavic dealer
Frequency
Rim
• • • After riding in the rain
• • Wear or shock
Brake pads
• • • • After riding in the rain
• • • Wear
Quick release • • • Every ride
Tyre • • Wear
Tyre pressure, tight connections, valves • • Monthly
Rim tape • •
When changing the tyre.
At least once a year
Hub play (QRM+) • • • • Every ride
Free wheel system (see www.mavic.com) • • • • • Monthly
Wheel (buckling, cracks, broken spokes,
composite components, etc.)
• • Every ride
• • • As necessary

Chat with your Mavic E-Deemax S 30 manual using AI

Get instant AI answers from your Mavic E-Deemax S 30 manual

Ask anything about the Mavic E-Deemax S 30. Answers come from this manual, with the pages they are based on.

E-Deemax S 30 Maintenance Schedule

Remind me when maintenance is due
Monthly
Check tire pressure, tight connections, valves

Verify tire pressure, secure connections, and valve integrity.

Show in the manual (page 10)
Yearly
Replace rim tape

Replace rim tape every time you change the tire or at least once a year regardless of distance covered.

Show in the manual (page 10)
Yearly
Service free wheel system, brakes, and quick releases

Have your free wheel system, brakes, and quick releases checked by an authorized Mavic dealer annually.

Show in the manual (page 10)
Every ride
Check quick release adjustment

Before each use, check the quick release adjustment to ensure wheels are securely fixed.

Show in the manual (page 10)
Every ride
Inspect wheel for damage

Check that wheels are not buckled or dented and inspect for cracks or spoke breakage.

Show in the manual (page 10)
Every ride
Adjust hub play (QRM+)

Leave wheel on bike and adjust bearing play using the supplied hub wrench if necessary.

Show in the manual (page 10)
After rain
Clean braking surfaces

Clean braking surfaces regularly after riding in rain to remove brake pad traces and dirt.

Show in the manual (page 10)
As needed
Replace brake pads

Regularly check wear indicators and replace brake pads when worn.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend E-Deemax S 30?

Yes No

Frequently Asked Questions

A

No, Mavic wheels should only be used with Mavic brand quick releases. Using incompatible devices can lead to loose wheels and potential fatal injury.

Is this answer helpful?

A

For QRM+, leave wheel on bike and use supplied hub wrench. Tighten screw if play exists. Loosen if wheel does not spin freely. Consult dealer if uncertainty.

Is this answer helpful?

A

Respect max pressure on tire or rim. If indications differ, use lower pressure to prevent tire dismounting or rim damage.

Is this answer helpful?

A

Replace when changing tire or at least once a year if in use. This ensures inner tube protection and rim sealing.

Is this answer helpful?

A

Warranty requires authorized dealer service. Using unapproved sealants or modifying wheels can void warranty and void responsibility for damage.

Is this answer helpful?

A

A UST wheel must be fitted only with a UST tubeless tire. Using incompatible tires risks rolling off the rim.

Is this answer helpful?

A

Have wheel checked by authorized Mavic dealer even if no visible damage. Composite wheels with impact must be returned for inspection.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Designed for mechanical stress resistance with durable construction techniques.
  • Clear safety warnings and torque specifications for assembly.
  • Compatible with disc brake systems including Center Lock.
  • Uses Mavic approved safety standards for quick releases.
VS

Disadvantages

  • Weight limits for cyclist and equipment may apply.
  • Maintenance must be done by authorized dealers exclusively.
  • Quick release compatibility issues with some fork dropouts.
  • Requires strict torque adherence to prevent failure.
  • Composite parts need impact inspection after accidents.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Rear Wheel

Colors

black, white

Wheel Size

29 "

Tire Type

Wire / Folding Tire (Clincher)

Material

Aluminum

Rim Width

30mm Internal

Rear Dropout Spacing

12x148 Thru Axle

Brake Type

Disc Brake (6-Hole)

Lacing Type

Standard

Spoke Count

28

Freehub Body

SRAM XD

Weight

2.45 lbs

Features

Aero Spokes, tubeless ready

M: qwen/qwen3.5-flash-20260224

Product Description

Exploring the Mavic E-Deemax S 30 29" Wheel

Building Trust Through Engineering

When selecting a rear wheel for your mountain bike, reliability is paramount. The Mavic E-Deemax S 30 offers a robust solution designed for the demands of modern e-MTB riding. This wheel integrates advanced construction techniques to handle complex forces while maintaining durability. Riders depend on these components to perform under pressure without failure.

Safety First

Safety is the foundation of every ride. The manual emphasizes strict adherence to assembly instructions. Users must ensure all components are tightened to specific torque values. For disc brakes, center lock nuts require 40 Newton meters, while screws need 5 Newton meters. Ignoring these values can lead to severe injury. Always check quick release compatibility before mounting. You should only use Mavic quick releases to prevent accidents. All equipment including discs must be tightened to specified torques using a torque wrench by an authorized dealer.

Maintenance Protocol

Regular maintenance ensures longevity. Replace rim tape when changing tires or at least once a year. Check for cracks, scratches, or color changes on composite components. If a fall occurs, inspect the wheel even if no damage is visible. Clean surfaces with soapy water only, avoiding high pressure washers. Lubrication should be done by authorized dealers. Check bearing play regularly using the supplied wrench.

Tire and Component Care

Tire pressure must be respected based on tire or rim markings. If indications differ, use the lower pressure to avoid rolling off the rim. Weight limits for cyclist and equipment may apply, so consult a dealer. Using non-approved sealants can void warranties and damage rims. Ensure the wheel is centered in the frame and fork every time it is mounted. Brake pads should be replaced before wear indicators are fully passed.

Final Thoughts

Ultimately, the E-Deemax S 30 29" 6-Hole Rear Wheel represents a commitment to quality. By following detailed instructions in the user guide, riders can maximize performance and safety. Always consult approved dealers for replacement parts and servicing. This careful approach guarantees that your riding experience remains enjoyable and secure for miles to come. Use disc brake wheels exclusively on bikes designed for them. A tubeless wheel must be mounted only with a UST tubeless tire to prevent dismounting risks.

Safety Warnings

The manual notes that cycling involves inherent risks of serious or fatal injury. Failure to follow instructions puts riders at risk. Be vigilant and follow traffic safety rules during day and night. Use lights and reflectors. Adapt riding behavior to weather conditions. For safe riding, helmet and protective clothing are recommended. The manual advises against modifying wheel spoke tension or components as minor changes can damage them or cause risk. In a descent, use discontinuous and front-rear balanced braking to limit heat on the wheel.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly