Manual.ly Logo

Markbass Little AG 1000 Manual

0.0 · 0 Ratings

PDF manual · 5 Pages

English

M: OA-GPT-5-NAN
page

/ 5

Loading...
649bf3e0a2a47de9a84dd0368c525318dcaa page 2
02
“To be used only
where the climate
is not tropical”
“The Lightning Flash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of uninsulated
“dangerous voltage” within the product enclosure
that maϐto constitute
a risk of shock to persons.”
“The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.”
“To be used only
with altitude
not exceeding 2000 m”
MORE INFORMATION
For warranty and service information, please contact your local Markbass distributor (contact information available at www.mark
bass.it). For more technical information, please visit us at www.markbass.it and ll out the form on the
Support page. We hope you enjoy your power amp and use it to make great music!
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions;
2) Keep these instructions;
3) Heed all warnings;
4) Follow all instructions;
5) Do not use this apparatus near water;
6) Clean only with dry cloth;
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions;
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
that
produce heat;
9) Do not defeat the safety purpose of the polarized or ground-type plug. A polarized plug has two blades with one wider tha
n the
other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, cons
ult an
electrician for replacement of the obsolete outlet;
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point wher
e
they exit from the apparatus
11) Only use attachments/accessories specied by the manufacturer;
12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from the tip-over (and Fig 2
1 DU
Tipping Cart Symbol).
13) Unplug this apparatus during lightning storms or when unused for long periods of time;
14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, su
ch as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus h
as been
exposed to rain or moisture, does not operate normally, or has been dropped;
15) “WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS”.
16) TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE
AC RECEPTACLE;
17) THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REAMIN READILY ACCESSIBLE.
18) In case of voltage selector make sure the switch on the rear panel is on the correct voltage before connecting it to the AC
power,
and the fuse is the right value for that voltage (This selector is not available on the 100V version).
Please change the voltage/fuse values label located near the voltage selector matching the voltage/fuse values when you
need
to change the voltage of the apparatus.
19) “WARNING: THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR OR WALL IN ACCORDANCE WITH INSTALLATION
ISTRUCTION. TIPPING, SHAKING, OR ROCKING THE MACHINE MAY CAUSE INJURY OR DEATH.”
20) “CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN TEH OPERATING INSTRUCTIONS UNLESS
YOU ARE QUALIFIED TO DO SO”
PRÉCAUTIONS D’EMPLOI
1) Lire ces instructions;
2) Conserver ces instructions;
3) Suivre tous les conseils d’utilisations;
4) Suivre toutes les instructions;
5) Ne pas utiliser cet appareil au bord de l’eau;
6) Nettoyer uniquement avec un chion humide;
7) Ne pas bloquer le système de ventilation. Installer conformément aux instructions du fabricant;
8) Ne pas installer l’appareil près d’une source de chaleur tel qu’un radiateur, un fourneau, ou bien un autre appareil qui
produit de
la chaleur;
9) Ne pas modier le système de sécurité de la che polarisée ou de de la che pour les prises de terre. Une che polarisée a deux
broches, l’une étant plus distante de l’autre. Une che pour prise de terre a deux broches et une pointe pour la masse.
La broche plus distante et la pointe pour la masse ont été installées pour votre sécurité. Si la che fournie de rentre pas dans
votre prise de courant consulter un électricien pour la substitution;
10) Protéger le cordon d’alimentation an qu’il ne soit pas piétiné ou écrasé tout particulièrement au niveau des ches, des pr
ises de
courant femelles, et des parties qui sortent de l’appareil;
11) Utiliser uniquement les accessoires recommendés par le fabricant;
12) Utilisez uniquement avec le chariot, le socle, le trépied, le support ou la table spéciés par le fabricant ou vendu avec l’appareil.
Lorsque vous utilisez un chariot, soyez prudent lorsque vous déplacez l’ensemble chariot / appareil pour éviter toute b
lessure du
renversement (et la gure 21 DU Tipping panier Symbol).
13) Ne pas branché l’appareil en cas d’orage accompagné d’éclairs. Le débrancher en cas de non utilisation prolongée;
14) S’adresser à un service assistance agréé si l’appareil a subi des dommages, si le cordon d’alimentation ou la che a été
endommagé, si un liquide a été renversé sur l’appareil ou bien si un object est tombé dans l’appareil, si ce dernier a été exposé à
la pluie ou à l’humidité, s’il ne fonctionne pas correctement ou s’il est tombé;
15) “AVERTISSANT: POUR RÉDUIRE LE RISQUE DU FEU OU DE DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU
L’HUMIDITÉ ET LES OBJETS REMPLIS DE LIQUIDES; TELS QUE DES VASES, NE DEVRAIENT PAS ÊTRE PLACÉS SUR CET APPAREIL”;
16) POUR DÉCONNECTER COMPLETEMEN L’APPAREIL DU RESEAU D’ALIMENTATION, DÉCONNECTER LE CORDON D’ALIMENTATION
DE LA PRISE MURALE;
17) LA PRISE DU RESEAU D’ALIMENTATION DOIT DEMEURER AISEMENT ACCESSIBLE.
18) En cas de sélecteur de tension s'assurer que l'interrupteur sur le panneau arrière est sur la bonne tension avant de le r
accorder à
l'alimentation secteur et le fusible est la bonne valeur pour que la tension (Ce sélecteur n'est pas disponible sur la version 100V).
S'il vous plaît changer la tension / valeurs de fusibles étiquette située près du sélecteur de tension correspondant aux valeurs /
fusibles de tension lorsque vous avez besoin de changer la tension de l'appareil.
19) “AVERTISSEMENT: CET APPAREIL DOIT ÊTRE ASSUJETTI AU PLANCHER OU AU MUR CONFORMÉMENT AUX INSTRUCTIONS
D’INSTALLATION. LE FAIT DE L’INCLINER, DE LE BALANCER OU DE L’AGITER PEUT CAUSER DES BLESSURES OU LA MORT.”
20) “ATTENTION: CES INSTRUCTIONS D'ENTRETIEN SONT DESTINÉES PAR PERSONNEL QUALIFIÉ SEULEMENT . POUR REDUIRE LE
RISQUE DE CHOC ÉLECTRIQUE NE PAS EFFECTUER TOUT ENTRETIEN AUTRE QUE CELLES CONTENUES DANS TEH MODE D'EMPLOI
SAUF SI VOUS ÊTES QUALIFIÉ POUR LE FAIRE”

Chat with your Markbass Little AG 1000 manual using AI

Get instant AI answers from your Markbass Little AG 1000 manual

Ask anything about the Markbass Little AG 1000. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Little AG 1000?

Yes No

Frequently Asked Questions

A

The Little AG 1000 delivers 1000W RMS at 4 ohms and 600W RMS at 8 ohms, making it suitable for high-volume live situations while remaining compact and lightweight.

Is this answer helpful?

A

The amp is factory preset to the sale-region voltage (100V/120V/230V/240V). Due to homologation and safety, changing the voltage may be restricted; follow manufacturer guidance and only have qualified service personnel perform changes and fuse replacements.

Is this answer helpful?

A

It features a balanced XLR Line Out (max 20 Vpp) for DI/PA use, Effect Send/Return (pre-EQ send), and a Tuner Out. These connections allow direct recording, FOH integration, and flexible effects routing.

Is this answer helpful?

A

The preamp offers five EQ bands—Ultralow (65 Hz), Low (100 Hz), Mid (500 Hz), High Mid (1.4 kHz) and High (3.8 kHz)—each with ±16 dB of adjustment, enabling precise sculpting from deep lows to cutting highs.

Is this answer helpful?

A

Yes. Its lightweight construction, robust features like a limiter, ground lift, mute and optional footswitch input, plus pro I/O, make it well suited for touring and professional gigging.

Is this answer helpful?

A

Use speaker cabinets with a minimum impedance of 4 ohms. Operating below 4 ohms can damage the amp or speaker outputs and void safe operating conditions.

Is this answer helpful?

A

No. Rack ears are not included and must be purchased separately if you plan to mount the head in a rack. Check Markbass accessories for compatible mounting options.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Very high power: 1000W RMS @ 4 ohm in a lightweight 3.2 kg chassis.
  • Five-band EQ with ±16 dB per band offers detailed tonal shaping.
  • Comprehensive I/O: balanced XLR Line Out, FX Send/Return, Tuner Out and Speakon output.
  • Limiter and clear gain range (-46 to 23dB) for stage-ready dynamics control.
  • Portable footprint ideal for gigging musicians and easy rig integration.
VS

Disadvantages

  • Voltage is factory preset by region and may not be user-changeable due to homologation.
  • Rack ears and some accessories are not included—additional purchase required.
  • Minimum load 4 ohms restricts use with lower-impedance speaker configurations.
  • Fuse values must match mains setting; incorrect fuses can damage the unit.
  • No onboard speaker modeling or digital effects—pure analog preamp only.
M: OA-GPT-5-NAN

Product Specification

Type

Top

Instrument

Electric Bass

Type

Transistor

Power

1,000 W

Channels

1

Special Features

Balanced Out (XLR)

Dimensions

10.87x3.27x9.84in (WxHxD)

Weight

7.05 lb

M: OA-GPT-54-NAN

Product Description

Markbass Little AG 1000 — Compact Power, Big Tone

The Markbass Little AG 1000 is a lightweight, high-power bass amp head designed for gigging bassists who need portability without sacrificing output. Weighing just 3.2 kg (7.05 lbs) and measuring roughly 27.6 x 25 x 8.3 cm, this head delivers a remarkable 1000W RMS at 4 ohms (600W at 8 ohms) while offering a full-featured preamp and flexible I/O suited to studio and live situations.

Features and sound

Despite its compact footprint, the Little AG 1000 provides a comprehensive EQ section with five bands: Ultralow (65 Hz), Low (100 Hz), Mid (500 Hz), High Mid (1.4 kHz) and High (3.8 kHz), each offering ±16 dB of adjustment. The front-panel controls include Gain (-46 to 23 dB), Master Volume, Line Out Level, a Limiter knob, and a Mute switch. Additional rear-panel options include Ground Lift and Pre/Post EQ selection, plus an optional footswitch input to toggle EQ and Mute.

Connectivity covers balanced XLR Line Out (max 20 Vpp), Effect Send/Return (pre-EQ send), Tuner Out, and a Neutrik Speakon speaker output with a minimum load of 4 ohms. The input section accommodates instruments with a high 500 kΩ input impedance, giving a responsive, dynamic tone. A built-in limiter and clear gain staging make it practical for stage use, protecting speakers while preserving headroom.

Build, power and safety

The Little AG 1000 is built with touring and professional use in mind: robust construction, clear labeling, and international power presets (100V/120V/230V/240V factory-set to region). It includes safety features and user guidance such as voltage/fuse notes and a packed set of operational warnings (ventilation, grounding, and servicing cautions). Fuse ratings vary by mains voltage and should be observed when servicing.

Who it’s for

This head suits session players, touring bassists, and anyone who wants a high-output, portable amp head with versatile tone shaping and pro-level connectivity. It’s ideal paired with tight, responsive speaker cabinets and works well in both live PA and direct recording setups via the balanced line output.

Notes

  • Minimum speaker load: 4 ohms. Do not operate below this rating.
  • Voltage is factory preset for the sale region; changing it may be restricted due to homologation.
  • Accessories such as rack ears are not included.
  • Specifications subject to change; intended for professional use.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly