Manual.ly Logo

Mannesmann ADAC Manual

0.0 · 0 Ratings

PDF manual · 27 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 27

Loading...
f636ed32f1084e481304b1cc7a4da7f703fa page 8
GB - 8
Electronic battery charger
Art. No. 12715
INSTRUCTION MANUAL
Read and observe all of the following safety precautions before you use your battery charger in order to prevent
injury to the user or damage to the appliance.
Keep this manual in a safe place for future reference, and include it with the charger if you wish to pass the charger
on to another person.
Intended use
The charger is intended solely for short-term and trickle charging on open lead-acid batteries and a variety of
sealed, maintenance-free lead acid batteries with a nominal voltage of 6 volts or 12 volts and a capacity of 1.2 to
120 Ah as commonly installed in vehicles. Suitable batteries include:
− Lead-acid batteries (WET)
− Gel batteries (gel-like electrolyte)
− AGM batteries (electrolyte absorbed in glass mat)
− Maintenance-free lead acid batteries (MF)
This charger must not be used on other rechargeable battery types such as NiCd, NiMH or Li-ion, or on non-
rechargeable batteries.
The charger may not be used as a starter aid. First charge the battery of your vehicle fully and remove the charger
before starting the vehicle.
The charger may not be used as a source of direct current or for other purposes.
The battery charger is designed for use in dry and protected environments at temperatures of -5 °C to +40°C.
This device is not designed to be used by children and people with limited mental capacities or those without
experience and/or knowledge. Keep children away from the device.
This charger is not intended for commercial use!
Explanation of symbols
Read instruction-manual before use!
Electrical products may not be
disposed of in the household waste!
For indoor use only!
(Dry environment)
Corresponds to EC directives
Insulated housing
(Protection class II)
IP65
IP-protection class
Spray water protected
Safety precautions
• Use your battery charger indoors only.
• Keep children and onlookers away from your working area.
• Do not use your charger in damp or wet surroundings.
• Make sure that you have sufficient light.
• Do not expose your battery charger to direct sunlight, rainfall or snow.
• Do not use your charger near explosive liquids or vapours.
• Wear eye protection and acid-resistant gloves.
• Keep your charger in a dry, safe place out of children’s reach.
• Do not use the cable to carry your charger or unplug it from the mains. Keep the cable protected from heat, oil,
and sharp edges.
• Make sure that your charger and all of its cables are in perfect condition before use.
• Have any damaged cables replaced at an authorised repair shop.
• Do not attempt to perform any repairs yourself.
• Always unplug the charger from the mains if you do not intend to use it.

Chat with your Mannesmann ADAC manual using AI

Get instant AI answers from your Mannesmann ADAC manual

Ask anything about the Mannesmann ADAC. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ADAC?

Yes No

Frequently Asked Questions

A

This device is designed for open and closed lead-acid batteries. It supports WET, Gel, AGM, and maintenance-free lead-acid models with a nominal voltage of 6 or 12 volts. It is not suitable for NiCd, NiMH, or Li-Ion batteries.

Is this answer helpful?

A

Connect the unit to a power socket, then press the MODE button multiple times to select the required program. Ensure the battery is connected before plugging in, and maintain the sequence of red to positive and black to negative.

Is this answer helpful?

A

The ER 1 display message indicates a faulty connection. This could result from wrong polarity, a short circuit, selection of an incorrect charging program, or overheating. Disconnect power and check connections immediately.

Is this answer helpful?

A

Yes, but you must connect the black negative cable to the car body, well away from the battery, carburetor, and fuel lines. Ensure the battery terminals are clean and free of rust before beginning.

Is this answer helpful?

A

Winter mode ensures the battery charges correctly in temperatures below 0 degrees Celsius. It adjusts voltage and current levels to prevent damage to the battery during the colder months when chemical reactions slow down.

Is this answer helpful?

A

The warranty covers free removal of faults, free replacement of defective parts, and free expert service including mounting. The fault must not be caused by improper handling or misuse of the device.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Microprocessor automates charging parameters for optimal performance
  • IP 65 rating protects against water jets in various environments
  • Supports 6V and 12V lead-acid batteries including AGM and Gel
  • Two-year full warranty covers defects and repair costs
  • Comfort connection option allows permanent mounting for convenience
VS

Disadvantages

  • Intended for indoor use only in dry environments
  • Cannot be used for commercial or industrial purposes
  • Not compatible with Li-ion or NiCd rechargeable batteries
  • Requires ventilation during charging to handle gas release
  • Maximum capacity limited to 120 Ah battery sizes
M: qwen/qwen3.5-flash-20260224

Product Specification

Suitable For

AGM, Lead, Maintenance-free Lead, Gel

Battery Voltage

6V, 12V

Charge Current Max.

4A

Battery Capacity

1.20-120Ah

Display

LCD (Battery Voltage, Charging Progress)

Color

Black, Red

M: qwen/qwen3.5-flash-20260224

Product Description

Master Your Vehicle Maintenance with the Mannesmann ADAC Car Battery Charger

Keeping your car running smoothly is vital for any driver seeking road reliability. When cold winter nights leave your vehicle stuck, having a reliable charging solution is key to avoiding tow trucks. The Mannesmann ADAC Car Battery Charger stands out as a robust tool designed to restore power to your lead-acid batteries efficiently. This electronic device supports both 6 volt and 12 volt systems, catering to motorcycles and standard passenger cars alike. Its versatility makes it an essential addition to any private garage or automotive workshop setting for maintenance.

Intelligent Charging Technology

At the core of this charger lies a sophisticated microprocessor that automates the entire charging process. Users do not need to guess the correct settings for their specific battery types. Simply connect the unit securely using the color-coded clips, select the mode via the keypad, and the device calculates the necessary parameters automatically. The digital display provides clear feedback on real-time voltage and current levels. You can choose between specialized programs like winter mode or long-term maintenance charging cycles. The winter settings adjust voltage and current specifically for temperatures below freezing, protecting the battery integrity during the coldest starts.

Safety and Durability Features

Safety is prioritized throughout the design specifications to prevent accidents during use. The unit carries an IP 65 rating, ensuring protection against water jets during outdoor washing or work. It includes reverse polarity protection switches to prevent damage from incorrect cable connections accidentally. However, please remember that this device is intended for indoor use only in dry environments. Never operate it near open flames or fuel lines due to flammable gas generation risks. The robust plastic housing shields internal components from typical garage hazards and accidental drops.

Operating Procedures and Care

Owners should follow detailed instructions to ensure safe usage always. Refer to the official Mannesmann ADAC Car Battery Charger Manual guidance for specific setup steps regarding connections to terminals. The kit includes ring eyes for a permanent comfort connection option for frequent users to save time. This allows you to keep cables in place without frequent reconnection every morning before trips. A two-year full warranty backs the product, covering defects and repair costs under normal conditions. Regular maintenance of the device ensures longevity and safety for years of service. Always disconnect power from the mains first before removing clamps to prevent electrical hazards or shocks. This charger simplifies the complex process of keeping your vehicle battery ready for the road ahead.

Important Usage Notes

Do not attempt to use this tool for non-rechargeable batteries or lithium-ion cells which require different chemistries. Ensure adequate ventilation since hydrogen gas may escape during charging cycles in enclosed spaces. If an error code appears, disconnect power immediately to reset the system safely. Check cables for wear and tear before every operation cycle to ensure integrity. This comprehensive tool simplifies maintenance while ensuring your investment lasts beyond standard units.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly