Manual.ly Logo

Makita DUR190 Manual

0.0 · 0 Ratings

PDF manual · 152 Pages

English

M: OA-GPT-5-NAN
page

/ 152

Loading...
4933afeaf15eb26422e522d79c6da52c5758 page 11
17 ENGLISH
2. Before doing any maintenance or repair work
󰀨
remove the battery cartridge.
3. Always wear protective gloves when handling
the cutting blade.
4. 󰀨
use gasoline, benzine, thinner, alcohol or the
like for the purpose. Discoloration, deformation
or cracks of the plastic components may result.
5. After each use, tighten all screws and nuts.
6. Do not attempt any maintenance or repair not
described in the instruction manual. Ask our
authorized service center for such work.
7. Always use our genuine spare parts and
accessories only. Using parts or accessories
supplied by a third party may result in the tool
breakdown, property damage and/or serious

8. Request our authorized service center to
inspect and maintain the tool at regular
interval.
9. Always keep the tool in good working condi-
tion. Poor maintenance can result in inferior per-
formance and shorten the life of the tool.
Storage
1. Before storing the tool, perform full cleaning
and maintenance. Remove the battery car-
tridge. Attach the cover to the cutting blade.
2. Store the tool in a dry and high or locked loca-
tion out of reach of children.
3. Do not prop the tool against something, such
as a wall. Otherwise it may fall suddenly and

First aid
1. 
Immediately replace any item taken from the

2. When asking for help, give the following
information:
— Place of the accident
— What happened
 
 
— Your name
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current

breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn

8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10.
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
󰀨
battery in such a manner that it cannot move
around in the packaging.
11. When disposing the battery cartridge, remove
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12. Use the batteries only with the products
 Installing the batteries to
-
sive heat, explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting

also void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3.
Charge the battery cartridge with room tempera-
ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hot
battery cartridge cool down before charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).

Chat with your Makita DUR190 manual using AI

Get instant AI answers from your Makita DUR190 manual

Ask anything about the Makita DUR190. Answers come from this manual, with the pages they are based on.

DUR190 Maintenance Schedule

Remind me when maintenance is due
After each use
Tighten all screws and nuts

After each use, tighten all screws and nuts to ensure proper assembly.

Show in the manual (page 17)
Yearly
Request authorized service center inspection

Request our authorized service center to inspect and maintain the tool at regular intervals.

Show in the manual (page 17)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend DUR190?

Yes No

Frequently Asked Questions

A

The DUR190 accepts Makita BL18-series batteries such as BL1815N, BL1820(B), BL1830(B), BL1840(B), BL1850(B) and BL1860B. Compatible chargers include DC18RC, DC18RD, DC18RE, DC18SD, DC18SE, DC18SF and DC18SH. Use only listed Makita batteries and chargers to ensure safety and maintain warranty.

Is this answer helpful?

A

Use Makita-approved nylon cutting heads (2.0–2.4 mm line), plastic blades, or 3‑/4‑tooth metal blades (230 mm) as specified. Nylon heads and plastic blades suit lawn trimming; metal blades are for weeds, high grass and undergrowth. Always fit the correct guard and follow installation instructions.

Is this answer helpful?

A

Wear helmet, eye protection, hearing protection, gloves and sturdy non-slip footwear. Keep bystanders and animals at least 15 m away, inspect the area for stones or hazards, never operate in poor visibility or explosive atmospheres, remove the battery before maintenance, and avoid cutting above waist height.

Is this answer helpful?

A

The tool features an integrated protection system that stops the motor and signals via a caution lamp when overloaded, overheated, or when the battery is over-discharged. In overload or overheat situations, release the trigger, clear obstructions, and allow the tool and battery to cool before resuming.

Is this answer helpful?

A

For bump‑and‑feed nylon heads, tap the rotating head on the ground to feed line. To replace line, remove the nylon head per the manual, open the cover and rewind or replace the line using only recommended Makita nylon cord. Always remove the battery before servicing the cutting head.

Is this answer helpful?

A

Common causes include an improperly installed or low battery, battery under-voltage, or tool protection activation due to overload/overheat. Ensure the battery is fully seated until the red indicator is hidden, charge or replace the battery, and check for entangled debris or damaged cutting attachments.

Is this answer helpful?

A

Makita advises using genuine Makita batteries, chargers and accessories. Non‑genuine or altered batteries may burst or malfunction and can void the Makita warranty. Similarly, only use cutting tools recommended by Makita to avoid safety risks and tool damage.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Versatile three-speed control and ADT for adaptive torque and efficient cutting across grass conditions.
  • Compatible with multiple cutting attachments (nylon head, plastic blade, 3/4‑tooth blades) for varied tasks.
  • Built-in tool/battery protection: overload, overheat and over-discharge safeguards prolong life.
  • Lightweight and ergonomic with adjustable handle/hanger and shoulder harness for comfortable use.
  • Part of Makita 18V ecosystem—works with a wide range of BL18-series batteries and chargers.
VS

Disadvantages

  • May produce noise levels approaching or exceeding 80 dB(A) under working conditions—hearing protection required.
  • Limited to 18V power class—may not match the sustained torque of higher-voltage commercial brushcutters.
  • Reverse and electric brake functions operate for short periods; heavy entanglements may require manual clearing.
  • Requires genuine Makita accessories and batteries to maintain warranty and safe operation.
  • Regular maintenance and proper battery handling required to avoid overheating or performance drops.
M: OA-GPT-5-NAN

Product Specification

Type

Grass trimmer

Working width

11.81 in

Cutting system

Line (2-line technique)

Line feed

Bump feed

Line diameter

0.08 in

Features

automatic speed control (ADT), charge status indicator, constant electronics, auxiliary handle, soft start, motor brake (AFT), brushless motor, telescopic

Noise level

91.6dB(A)

M: OA-GPT-54-NAN

Product Description

Makita DUR190 Battery Grass Trimmer — Reliable Cordless Cutting Power

The Makita DUR190 is a versatile 18V cordless grass trimmer engineered for both homeowners and light commercial users who need efficient, lightweight cutting performance. Available in bike-handle (U) and loop-handle (L) configurations and in two closely related models (DUR190 / DUR191), this trimmer delivers three selectable speed levels (Low 3,500 min-1; Medium 5,100 min-1; High 6,000 min-1) and supports multiple cutting attachments — nylon cutting heads, plastic blades, and 3‑ or 4‑tooth metal blades — for trimming lawn grass or tackling tougher weeds and undergrowth.

Designed around Makita’s 18V lithium-ion battery ecosystem, the DUR190 accepts a wide range of BL18-series battery cartridges and benefits from battery/tool protection systems that guard against overload, overheating and over-discharge. The tool also features ADT (Automatic Torque Drive Technology) to adapt torque and speed to cutting conditions, a reverse function to help clear tangled debris, and an electric brake for quick stop capability.

Ergonomics and safety are central to the DUR190’s design. Models with bike handles include a barrier for additional protection, and all versions support an adjustable shoulder harness and handle positioning for comfortable operation. The tool emphasizes operator safety with clear warnings, a safety lever plus switch trigger arrangement to prevent accidental starts, and comprehensive guarding requirements for blades or nylon heads. Vibration and noise levels are measured and provided, and hearing protection is recommended during use.

Maintenance and reliability considerations are straightforward: install and lock the battery properly, inspect cutting attachments regularly, remove the battery before servicing, and use only recommended Makita blades and nylon heads. Genuine Makita replacement parts and Makita-authorized service are advised for repairs. The manual includes guidance on replacing nylon cord, mounting cutting tools, and troubleshooting common issues like abnormal vibration, stalling, or loss of power.

Overall, the Makita DUR190 is a compact, adaptable trimmer option for users who value cordless freedom, modular cutting choices, and built-in protections that help preserve battery and tool life while prioritizing operator safety.

Notes

  • Operate with recommended Makita BL18 battery cartridges and compatible Makita chargers.
  • Wear eye, ear, hand and foot protection; keep bystanders 15 m away.
  • Use only specified cutting attachments and follow guard and installation instructions.
  • Allow the tool and battery to cool if overload/overheat protection activates.
  • Remove battery before storage, transport, or maintenance.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly