Manual.ly Logo

Mafell ZH 245 Ec Manual

0.0 · 0 Ratings

PDF manual · 78 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 78

Loading...
08082cc62579d0e6d58bfb51ffbe516e83e5 page b
-11-
Im normalen Betrieb sollte die Spanabnahme auf ca.
3 mm beschränkt bleiben. Die maximale
Spanabnahme sollte zur Vermeidung einer
Überlastung des Motors nur in extremen Fällen
ausgenutzt werden.
5.4 Arbeitshinweise
Der Zimmereihobel liegt infolge seiner
ausgewogenen Gewichtsverteilung gut in der Hand.
Er lässt sich mit den Handgriffen 1 und 4 (Abb. 4)
führen.
Zum Hobeln wird die Maschine mit der vorderen
Auflagefläche so auf das Werkstück aufgelegt, dass
die Hobelwelle nicht zum Eingriff kommt. Nach dem
Einschalten wird der Zimmereihobel, sobald die
Hobelwelle ihre volle Drehzahl erreicht hat, mit
gleichmäßigem Druck über das Holz geführt. Ein
gleichmäßiger Vorschub ergibt ein sauberes
Hobelbild und schont die Maschine.
Beim Überlasten des Zimmereihobels fällt die
Drehzahl der Hobelwelle ab. Es muss gewartet
werden, bis die Hobelwelle ihre volle Drehzahl wieder
erreicht hat. Danach kann mit verringertem Vorschub
weitergearbeitet werden.
Bei Arbeiten mit voller Hobelbreite wird der Hebel mit
der Führungsrolle 7 nach unten geschwenkt und mit
dem Rändelknopf 8 festgespannt. Dadurch hat der
Hobel eine seitliche Führung.
Nach dem Hobeln Maschine durch Loslassen des
Schalters sofort ausschalten und nicht mit laufender
Hobelwelle absetzen. Beim Zurückstellen der
Spanabnahme auf 0 kann der Hobel auch bei
ungünstiger Lage der Messer auf einer ebenen
Fläche abgestellt werden, ohne die Unterlage zu
beschädigen.
5.5 Späneauswurf
Der Zimmereihobel ist so gestaltet, dass beim Hobeln
mit sachgerechter Vorschubgeschwindigkeit und voll
ausgenutzter Hobelbreite ein einwandfreier
Spanauswurf sichergestellt ist. Dabei werden die
Späne seitlich ausgeworfen, so dass eine
Behinderung der Sicht auf das Werkstück vermieden
wird.
6 Wartung und Instandhaltung
Gefahr
Bei allen Wartungsarbeiten den
Netzstecker ziehen.
MAFELL-Maschinen sind wartungsarm konstruiert.
Die eingesetzten Kugellager sind auf Lebenszeit
geschmiert. Nach längerer Betriebszeit empfehlen
wir, die Maschine einer autorisierten MAFELL-
Kundendienstwerkstatt zur Durchsicht zu übergeben.
Für alle Schmierstellen nur unser Spezialfett, Bestell -
Nr. 049040 (1 kg - Dose), verwenden.
6.1 Werkzeug
Die auf der Maschine benutzte Hobelwelle,
Spannbacken, Messerträger und Messer sollten
regelmäßig entharzt werden, da ein sauberes
Werkzeug die Schnittqualität verbessert. Das
Entharzen erfolgt durch 24-stündiges Einlegen der
Spannbacken, Messerträger und Wendemesser in
Petroleum oder handelsübliche Entharzungsmittel.
Aluminiumwerkzeuge dürfen nur
mit Lösungsmitteln, welche das
Aluminium nicht angreifen, entharzt
werden.
6.2 Lagerung
Wird die Maschine längere Zeit nicht verwendet, ist
sie sorgfältig zu reinigen. Blanke Metallteile mit einem
Rostschutzmittel einsprühen.

Chat with your Mafell ZH 245 Ec manual using AI

Get instant AI answers from your Mafell ZH 245 Ec manual

Ask anything about the Mafell ZH 245 Ec. Answers come from this manual, with the pages they are based on.

ZH 245 Ec Maintenance Schedule

Regularly
Clean and deresinify tool parts

Regularly clean the planing shaft, spacer blocks, blade carriers and blades to improve cutting quality. Soak parts in petroleum or commercial deresinification agent for 24 hours.

Show in the manual (page 11)
After extended use
Service machine at authorized center

After a longer period of operation, hand the machine over to an authorized MAFELL customer service shop for inspection.

Show in the manual (page 11)
Long-term storage
Clean and protect metal parts

If the machine is not used for a long time, clean it carefully and spray bright metal parts with a rust inhibitor.

Show in the manual (page 11)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend ZH 245 Ec?

Yes No

Frequently Asked Questions

A

The machine features a robust 2500-watt universal motor designed for consistent performance under heavy load conditions.

Is this answer helpful?

A

No, the machine is designed exclusively for processing solid wood and using specific hard metal blades.

Is this answer helpful?

A

The planing shaft rotates at an impressive speed of 8500 revolutions per minute for precise cuts.

Is this answer helpful?

A

An external system with an air velocity of at least 20 meters per second is mandatory for safety.

Is this answer helpful?

A

Yes, chip removal can be set between 0 and 4 mm using the depth adjustment handle.

Is this answer helpful?

A

The weight is 13.2 kilograms, so care is needed when handling and positioning the machine.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Powerful 2500-watt universal motor for consistent performance
  • Electronic speed regulation maintains consistency under load
  • Automatic brake stops cutter head within three seconds
  • Large 245 mm planing width for efficient work
  • Reversible hard metal blades for longevity
VS

Disadvantages

  • Heavy unit weight of 13.2 kilograms without cable
  • Requires external dust extraction for optimal safety
  • Maintenance intervals must be regular to prevent strain
  • Only suitable for solid wood processing applications
  • Specific rust inhibitor needed for long-term storage
M: qwen/qwen3.5-flash-20260224

Product Specification

Power

2,300W

No-load speed

8,500 rpm

Planing width

9.76 in

Depth of cut

0-0.16 in

Features

Dust extraction, Auxiliary handle, Electronic speed control

Weight

40.34 lbs

Package Contents

Reversible blades

M: qwen/qwen3.5-flash-20260224

Product Description

Master Woodworking with Precision Tools

The Mafell ZH 245 Ec Electric Planer Manual Overview

When it comes to professional carpentry and fine woodworking, having the right tools is essential for success in any workshop environment. The Mafell ZH 245 Ec Electric Planer Manual provides crucial insights for operating this powerful machine safely and efficiently during daily jobs. This industrial-grade planer boasts a robust 2500-watt universal motor that delivers consistent performance under heavy load conditions. It handles large surfaces with a planing width of 245 millimeters. This ensures a smooth, consistent finish throughout the entire project without compromise.

The unit operates at an impressive speed of 8500 revolutions per minute, ensuring that cuts are clean and precise every time. One of the standout features is the electronic speed regulation which maintains consistency even when facing significant resistance from the timber. Safety is paramount, and the Mafell ZH 245 Ec Electric Planer Manual highlights the importance of the automatic brake that stops the cutter head within three seconds after release. This feature significantly reduces accident risks during heavy use and frequent operation in professional settings.

Dust extraction is another critical aspect of this tool for maintaining air quality and operator health. The planer requires an external dust extraction system with an air velocity of at least 20 meters per second to ensure safe working conditions. The manual details how to connect the 75-millimeter dust port correctly for optimal performance and cleanliness of the work area. Maintenance is straightforward but requires regular attention to keep the device in top condition. Blades should be reversed or replaced when dull to prevent motor strain and ensure a quality cut every day.

We recommend reviewing the safety instructions section thoroughly before every job to avoid injury or machine damage completely. The machine is designed for solid wood processing and uses reversible hard metal blades for longevity and high efficiency. Handling the unit requires care due to its weight of 13.2 kilograms without the mains cable attached. Proper storage involves cleaning metal parts and applying rust inhibitor to prevent corrosion over time effectively.

Conclusion and Usage Tips for Best Results

Always prioritize safety gear like ear protection and dust masks during operation to protect your health from wood dust effectively. Ensure the workpiece is secured against slipping before starting to prevent dangerous kickbacks or accidents. This guide ensures longevity and safe operation for years of dedicated work in the shop regularly.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly