Manual.ly Logo

Mafell MHU 82 Manual

0.0 · 0 Ratings

PDF manual · 22 Pages

English

M: OA-GPT-5-NAN
page

/ 22

Loading...
dd8b0f3b7c8b5a86fc71f396d2d8c8486a22 page b
1.5 Vibration
The typical hand-arm vibration is less than 2.5 m/s
2
.
2. Delivery specification
Portable electric plane MHU 82 complete with:
1 pair of TCT knives
1 rabbet depth stop
1 hose connector
1 service tool
1 carrying case – according to type-specific
machine execution
1 operating manual
1 folder «Safety Instructions»
3. Use according to intended purpose
The MAFELL portable electric plane MHU 82 is
intended exclusively for cutting operations on solid
timber and sheet materials, such as particle board,
core-boards and MDF boards, using TCT knives.
The dimension of the clamping devices, knife sup-
ports and the knives used must correspond to the
Ref. Nos in the spare parts list.
In combination with the bench stand 033110 (optio-
nal accessory), the portable electric plane MHU 82
is intended for stationary usage.
Any other use beyond this scope is considered as
failing to comply with the intended purpose. The
manufacturer is not liable for any damage caused as
a result of this; the risk is borne solely by the user.
The machine is not suitable for operation in the rain
outdoors or in areas subject to explosion hazards.
Use according to the intended purpose also includes
compliance with the operating, maintenance
and
repair conditions specified by the manufacturer
, and
adherence to the safety instructions contained in
the operating manual.
The portable electric plane MHU 82 must be operated,
tooled and maintained only by persons familiar with
the machines and instructed as to the risks. Repair
work must be carried out by MAFELL authorized
dealers or MAFELL customer service agencies.
The relevant accident prevention regulations and
other generally recognized industrial, medical and
technical safety rules must be complied with.
Unauthorized modifications to the machine preclude
the liability of the manufacturer for any resultant
damage.
Residual risks:
Even when used according to the intended purpose
and in compliance with all the relevant safety
regulations, the design of the machine prescribed
by its function gives rise to potential residual risks,
for instance from the following sources:
– Touching the running cutter head underneath the
base plate.
– Touching the sharp planing knives when cutter
head is not running.
– Touching the sharp cutting edges of the planing
knives when changing the knives.
– Touching the running cutter head in the chip
ejection area.
– Hurling away of planing knives which have not
been inserted correctly.
–
Breakage and hurling away of pieces of the planing
knives.
– Hurling away of the machine or the workpiece
during dropped-in cutting especially when using
profile reversible knives.
– Touching live parts with the housing open and the
mains plug not removed.
– Hearing can be impaired when working for long
periods without ear protectors.
– Emission of wood dust: a health hazard when
working for long periods in closed premises with-
out dust extraction.
4. Safety instructions
If used incorrectly, woodworking machines can be
dangerous. For this reason, always comply with the
safety instructions summarized in this chapter, the
accident prevention regulations of the relevant
liability insurance association or equivalent, and the
safety regulations applicable in the country con-
cerned.
– Never work without the protective equipment
prescribed for the relevant operation and do not
make any modifications to the machine that
could undermine safety.
–
Children and young persons must not operate this
machine. This rule does not apply to young per-
sons receiving training and being supervised by
an expert.
– Always wear close-fitting industrial clothing and
remove rings, bracelets and watches.
– 11 –

Chat with your Mafell MHU 82 manual using AI

Get instant AI answers from your Mafell MHU 82 manual

Ask anything about the Mafell MHU 82. Answers come from this manual, with the pages they are based on.

MHU 82 Maintenance Schedule

Remind me when maintenance is due
Yearly
Professional inspection

After prolonged operation, have the machine checked by an authorized MAFELL customer service agency.

Show in the manual (page 13)
Regularly
Clean machine of dust

Remove accumulated dust and blow out motor ventilation openings. Pull mains plug before starting.

Show in the manual (page 13)
Regularly
Deresinize cutter head and knives

Soak clamping devices, knife supports and knives for 24 hours in paraffin or resin remover to improve cutting quality.

Show in the manual (page 13)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend MHU 82?

Yes No

Frequently Asked Questions

A

The MHU 82 is intended for solid timber and panel materials such as chipboard, core-boards, laminated boards and MDF. It is not suitable for cutting metal, wet wood or for use in explosive atmospheres.

Is this answer helpful?

A

Yes. The standard delivery includes TCT reversible knives, a rabbet depth stop, hose connector, a service tool and a carrying case. Specific accessories depend on model execution; optional add-ons include angle fences, a bench stand with retractable knife guard and dust bags.

Is this answer helpful?

A

Always disconnect the mains first. Loosen the handle screw, set the rabbet depth stop, loosen pressure screws, remove and flip or replace the knife, align it with front and rear supports and retighten pressure screws to the specified torque. Clean components before reassembly.

Is this answer helpful?

A

For prolonged indoor use or when machining materials that generate hazardous dust, connect the plane to a suitable extractor. To meet health guidance (e.g., TRGS 553), use a tested extractor; air velocity should be at least 20 m/s to keep wood dust concentrations low.

Is this answer helpful?

A

Wear hearing protection (noise often exceeds 85 dB(A)), eye protection and close-fitting clothing. Secure the workpiece, keep hands away from the cutter head, do not operate in wet conditions, and always unplug the machine before maintenance or knife changes.

Is this answer helpful?

A

Regularly clean dust from the machine and blow out motor vents. De-resinate cutter head, clamping devices and knives periodically (soak in paraffin or approved remover). Bearings are grease-packed for life; after extended use have the machine checked by authorized MAFELL service.

Is this answer helpful?

A

Check mains power and fuses first. If carbon brushes are worn, return the machine to an authorized MAFELL service center. If it stops under load, verify power supply, inspect brushes and ensure knives are sharp and correctly installed.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Portable yet powerful: 82 mm cutting width with high cutter head speed for clean results.
  • Complete kit: includes reversible TCT knives, rabbet depth stop, hose connector and carrying case.
  • Low maintenance: lifetime-greased bearings and straightforward de-resination procedures.
  • Safe design: Class II double insulation and a start lock-off to prevent accidental activation.
  • Modular: optional bench stand, angle fences and multiple clamping/knife sets for expanded use.
VS

Disadvantages

  • Noise and vibration: workplace sound pressure typically exceeds 85 dB(A); hearing protection required.
  • Dust hazard: requires external extraction for prolonged indoor use to meet health limits.
  • Not for outdoor wet or explosive atmospheres; limited to wood and approved panels.
  • Requires careful knife handling: risk of kickback or ejected parts if knives are incorrectly fitted.
  • Some repairs (carbon brushes, service) require authorized MAFELL service to retain warranty.
M: OA-GPT-5-NAN

Product Specification

Power

800W

No-load speed

12000/min

Planing width

max. 3.23 in

Rebating depth

0.87 in

Chip depth

0-0.12 in

Special features

Dust extraction, Depth stop, Auxiliary handle

Weight

7.50 lb

Scope of delivery

Case (T-Max), Reversible blade

M: OA-GPT-54-NAN

Product Description

Mafell MHU 82 Electric planer incl. case Manual

The Mafell MHU 82 Electric planer incl. case Manual describes a compact, high-performance one-handed planer designed for precision woodworking on solid timber and panel materials such as chipboard, MDF and laminated boards. Equipped with an 82 mm cutting width and a high-speed cutter head, the MHU 82 balances portability and capability, making it suitable for craftsmen who need clean, repeatable planing, rabbeting and profiling in workshops or on-site jobs.

Built with a robust universal motor and double insulation (Class II), the MHU 82 delivers reliable power at 230 V or 110 V variants. The planer ships complete with TCT reversible knives, a rabbet depth stop, hose connector for dust extraction, service tool and a carrying case for secure transport and storage. Optional accessories — including angle fences, a bench stand with retractable knife guard, dust bags and multiple wave clamping sets — expand the tool’s versatility for jointer-style use and extended stationary operation.

Safety and proper use are core focuses of the manual. The planner must be used only on appropriate wood-based materials and only by trained users who observe the safety instructions: wear hearing protection, avoid wet conditions, secure the workpiece, disconnect mains before servicing, and always use correct MAFELL spare parts. Residual risks are documented (sharp knives, rotating cutter head, ejected parts, wood dust and noise), alongside recommended protective measures and connection to a dust extractor for prolonged use.

Maintenance guidance emphasizes low upkeep: ball bearings are grease-packed for life, but the cutter head, clamping devices and knives should be regularly cleaned and de-resinated to maintain surface quality. Knife reversal or replacement is advised when dull, and periodic inspection by an authorized MAFELL service center is recommended for long-term reliable operation.

Operational details include non-latching start with a safety lock-off button, adjustable cutting depth via a dial, instructions for rabbeting with the depth stop, and secure knife changing and alignment steps. Troubleshooting covers common issues: power absence, worn carbon brushes, blunt knives, uneven feed, chip ejection blockages and recommended remedies.

In short, the Mafell MHU 82 is a thoughtfully engineered portable planer that combines precision features, modular accessory support and clear safety and maintenance guidance—ideal for professionals and serious hobbyists seeking a nimble tool for planing and rabbeting tasks.

Notes

  • Always disconnect the mains before knife changes or maintenance.
  • Use an approved dust extractor for prolonged indoor use; maintain air velocity >= 20 m/s.
  • Only use original MAFELL replacement parts to preserve warranty and safety.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly