Manual.ly Logo

Mafell KSS 60 cc Manual

0.0 · 0 Ratings

PDF manual · 102 Pages

English

M: OA-GPT-54-NAN
page

/ 102

Loading...
b8bfee82f084c3a03d263e7acf1d3fe3d2e4 page d
-13-
Halten Sie die Maschine an den Handgriffen fest
und setzen Sie sie mit dem vorderen Teil der
Grundplatte auf das Werkstück auf.
Schalten Sie die Handkreissäge ein (siehe
Kapitel 5.2) und schieben Sie die Maschine
gleichmäßig in Schnittrichtung vor.
Nach dem Schnittende schalten Sie die Säge
durch Loslassen des Schalterdrückers 10 (Abb.
2) aus.
5.7 Sägen mit dem Parallelanschlag
Der Parallelanschlag dient zum Sägen parallel zu
einer schon vorhandenen Kante. Dabei kann der
Anschlag sowohl rechts als auch links an der
Maschine angebracht werden. Dabei beträgt der
Schnittbereich auf der rechten Seite 33 - 130 mm
(Ablesezeiger „X“ Abb. 1) und auf der linken Seite
163 - 300 mm (Ablesekante an Zeigerkante „Y“ Abb.
1). Im Bereich von 163 – 220 mm muss die Maschine
um ca. 10 mm nach oben gestellt werden, damit der
Anschlag unter das Motorgehäuse geschoben
werden kann.
Sie können die Schnittbreite nach dem Lösen
der Flügelschrauben 20 (Abb. 2) verstellen, in
dem Sie den Anschlag entsprechend
verschieben, und anschließend die
Flügelschrauben wieder festziehen.
Zusätzlich kann der Parallelanschlag durch einfaches
Umdrehen (Führungsfläche für die Werkstückkante
zeigt nach oben) auch als Doppelauflage zur
besseren Führung der Handkreissäge verwendet
werden. Nun kann die Maschine an einer auf dem
Werkstück befestigten Führung entlanggeführt
werden.
5.8 Arbeiten mit dem Untergreifanschlag
Der Untergreifanschlag dient zum Arbeiten parallel zu
einer schon vorhandenen Kante. Dabei kann der
Anschlag sowohl rechts als auch links an der
Maschine angebracht werden. Dabei beträgt der
Schnittbereich auf der rechten Seite ca. 12 - 40 mm
und auf der linken Seite ca. 30 – 210 mm.
Sie können die Schnittbreite nach dem Lösen
der Flügelschrauben 20 (Abb. 2) verstellen, in
dem Sie den Anschlag entsprechend
verschieben, und anschließend die
Flügelschrauben wieder festziehen.
6 Wartung und Instandhaltung
Gefahr
Bei allen Wartungsarbeiten den
Akku ziehen.
MAFELL-Maschinen sind wartungsarm konstruiert.
Die eingesetzten Kugellager sind auf Lebenszeit
geschmiert. Nach längerer Betriebszeit empfehlen
wir, die Maschine einer autorisierten MAFELL-
Kundendienstwerkstatt zur Durchsicht zu übergeben.
Für alle Schmierstellen nur unser Spezialfett, Bestell -
Nr. 049040 (1 kg - Dose), verwenden.
6.1 Lagerung
Wird die Maschine längere Zeit nicht verwendet, ist
sie sorgfältig zu reinigen. Blanke Metallteile mit einem
Rostschutzmittel einsprühen.

Chat with your Mafell KSS 60 cc manual using AI

Get instant AI answers from your Mafell KSS 60 cc manual

Ask anything about the Mafell KSS 60 cc. Answers come from this manual, with the pages they are based on.

KSS 60 cc Maintenance Schedule

Every longer period of time
Inspect and service by authorized center

After a long period of operation, hand the machine to an authorized MAFELL customer service shop for inspection.

Show in the manual (page 13)
Long term storage
Clean and protect metal parts

If not used for a long time, clean carefully and spray bright metal parts with a rust inhibitor.

Show in the manual (page 13)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend KSS 60 cc?

Yes No

Frequently Asked Questions

A

It is intended for solid wood and can also handle panel materials such as chipboard, core board, and MDF when used with approved blades. For best results, choose the blade type that matches the material and cut style.

Is this answer helpful?

A

Yes. The saw unit tilts from 0° to 45° for bevel cuts, and the cutting depth is adjustable up to 66 mm. It also supports plunge cuts, which are useful for starting cuts inside a workpiece or at marked points.

Is this answer helpful?

A

The system includes a parallel guide fence, and the saw is designed to work with guide rails for more accurate tracking. This makes it easier to follow straight lines and repeat consistent cuts along an edge.

Is this answer helpful?

A

Yes. The saw has a 35 mm extraction connection, and using an external dust extractor is strongly recommended, especially during longer or dust-heavy work. It improves visibility, cleanliness, and overall working conditions.

Is this answer helpful?

A

Key safety features include an upper fixed guard, a lower retractable guard, a riving knife/splitter, a brake, a large base plate, and insulated handles. These features help improve control and reduce cutting risks.

Is this answer helpful?

A

The manual explains setup, blade choice, cutting depth adjustment, bevel settings, plunge-cut technique, maintenance, and safety checks. It helps users work more accurately and avoid common setup mistakes.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Strong 1800 W motor with smooth start and overload control for reliable cutting performance.
  • Adjustable depth up to 66 mm and bevel range to 45° for versatile cutting tasks.
  • Guide rail and parallel stop support accurate, repeatable cuts.
  • Safety-focused design with guards, splitter, brake, and dust extraction port.
VS

Disadvantages

  • Best suited to wood and panel materials, not general-purpose cutting for metal.
  • Noise level is high, so hearing protection is necessary during use.
  • Dust extraction is strongly recommended for cleaner and safer operation.
  • Setup and blade selection may take practice for first-time users.
M: OA-GPT-54-NAN

Product Specification

Type

Circular Saw

Power

1800W

No-load speed

2700-4700/min

Saw blade diameter

7.28 in

Cutting capacity

2.64 in (cutting depth at 0 degrees), 2.09 in (cutting depth at 45 degrees inclination)

Blade tilt

60 degrees/60 degrees left/right

Tool mounting

Bore 0.79 in

Special features

Speed control, Parallel guide, Dust extraction, Tilt function

Weight

13.45 lb

Scope of delivery

Case

M: OA-GPT-54-NAN

Product Description

Mafell KSS60cc Electric Hand-Held Circular Saw incl. Case Manual

The Mafell KSS60cc Electric hand-held circular saw incl. case Manual is built for users who want portable precision with a professional feel. It combines a robust 1800 W universal motor with smooth starting electronics, an automatic brake, and a wide speed range, giving you strong cutting performance while keeping control in your hands. For workshop tasks, site work, or repeat cuts in timber and sheet materials, it is the kind of tool that aims to make accurate cutting feel natural.

What stands out most is its flexibility. The saw unit tilts from 0° to 45°, and the cutting depth can be adjusted up to 66 mm, which makes it suitable for straight cuts, bevel cuts, and plunge cuts. That range helps when you need to move from rough cutting to more detailed fitting work without changing tools. The included guide rail support and parallel stop also improve line-following accuracy, so the saw is not only powerful but also refined in use.

The KSS60cc is designed for solid wood, as well as common panel products such as chipboard and MDF, when used with approved blades. Different blade choices let you tailor the cut to the job: faster ripping, balanced crosscutting, or cleaner finishing. That adaptability matters if you work across a mix of materials and want one saw that can handle more than a single task. The manual makes these setup choices easier to understand, especially when selecting the right blade, setting depth, or preparing for bevel and plunge cuts.

Safety and practicality are built into the design. Fixed and moving blade guards, a riving knife, a stable base plate, and a brake all contribute to safer handling. Dust extraction support is another important advantage, especially during longer cuts where visibility and air quality matter. Combined with the case and manual, the package feels organized, portable, and ready for regular use. For anyone who values accuracy, control, and a well-planned cutting system, the Mafell KSS60cc offers a confident blend of power and precision.

Notes

  • Use approved 185 mm blades matched to the material.
  • Wear hearing and dust protection during longer work.
  • Check guards, depth, and splitter settings before every cut.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly