Manual.ly Logo

Mafell KSS 40 18M bl Manual

0.0 · 0 Ratings

PDF manual · 126 Pages

English

M: OA-GPT-5-NAN
page

/ 126

Loading...
61b1904e094acdf37c511a53191d17e68091 page 14
-20-
1 Signs and symbols
This symbol appears at places where you will find instructions for your own
safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get damaged.
This symbol indicates tips for the user and other useful information.
2 Product information
in respect of machines with item number 91B301, 91B302, 91B321, 91B323, 91B325 or 91B348
2.1 Manufacturer's data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218
2.2 Machine identification
All details required for machine identification are available on the attached rating plate.
CE symbol to document compliance with the basic safety and health requirements
according to Appendix I of the Machinery Directive.
For EU countries only
Do not dispose of electrical tools together with domestic waste!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete electrical tools
must be collected separately and recycled in an environmentally-compatible manner.
To reduce the risk of injury, please read the operating instructions.
Protect the rechargeable battery from heat, excessive solar radiation, fire, frost, water
and humidity.
Protect rechargeable battery packs from humidity!
Protect rechargeable battery packs from fire!
There is danger of explosion!
Cordless Allicance System (=CAS) is a cross-manufacturer battery pack system.
Further information is available at www.cordless-alliance-system.com

Chat with your Mafell KSS 40 18M bl manual using AI

Get instant AI answers from your Mafell KSS 40 18M bl manual

Ask anything about the Mafell KSS 40 18M bl. Answers come from this manual, with the pages they are based on.

KSS 40 18M bl Maintenance Schedule

Before each use
Check lower guard function

Verify the lower guard closes properly and moves freely. Do not operate if it is stuck or does not close instantly.

Show in the manual (page 11)
After long storage
Clean machine and apply rust protection

Clean the machine carefully before storing for a long period. Spray bare metal parts with a rust inhibitor.

Show in the manual (page 16)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend KSS 40 18M bl?

Yes No

Frequently Asked Questions

A

The KSS40 is intended for longitudinal and cross cutting of solid wood and panel materials (chipboard, core board, MDF). Use appropriate carbide-tipped blades (12, 24 or 40 teeth) depending on whether you cut along the grain, across the grain or laminate.

Is this answer helpful?

A

The kit includes two Akku-PowerTank 18 M LiHD batteries and an APS 18 M charger. The saw is compatible with Metabo/CAS (Cordless Alliance System) battery packs; use only approved chargers and CAS/Metabo batteries to ensure safe operation and warranty compliance.

Is this answer helpful?

A

Cutting depth is adjustable up to approximately 40–42 mm (depending on configuration). The saw unit tilts between 0° and 45° for bevel cuts. Always set cutting depth slightly deeper (2–5 mm) than material thickness for best results and clamp adjustments before cutting.

Is this answer helpful?

A

Safety elements include an upper fixed guard, a lower retractable guard, a riving knife/splitter to prevent blade pinching, hand grips and an electronic brake. The manual stresses proper use of the riving knife (installed except for plunge cuts) and adherence to safe cutting technique to minimize kickback risk.

Is this answer helpful?

A

Yes. For operations producing significant dust, connect to an external dust extractor. The manual specifies a minimum air velocity of 20 m/s at the hose connector (28 mm diameter). Use a suitable extractor and wear a dust mask to reduce health risks from wood dust.

Is this answer helpful?

A

Remove the battery, press the arbor lock, open the lower guard and use the supplied hex key to release the flange screw and front clamping flange. Fit the blade observing rotation direction, reassemble and tighten while holding the lock. Recommended blades: 120 x 1.8 x 20 mm carbide, 12T (rips), 24T (general), 40T (crosscuts/laminate).

Is this answer helpful?

A

Maintenance is minimal: keep guides and adjustment points clean, check guard and riving knife function, and use only Mafell original spare parts. Bearings are greased for life; for extended service send the machine to an authorized Mafell service center if needed.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Brushless 18 V motor with 6,700 rpm for efficient, clean cutting and longer tool life.
  • Comprehensive kit: hard case, two LiHD batteries, APS charger, FLEXI rail and accessories included.
  • Adjustable cutting depth (up to ~40–42 mm) and bevel range 0°–45° for versatile cutting tasks.
  • Safety features: upper fixed and lower retractable guards, riving knife/splitter, electronic brake.
  • Low maintenance design with lifetime-greased bearings and easy blade change with arbor lock.
VS

Disadvantages

  • Sound pressure around 92 dB(A) — hearing protection and dust extraction required for extended use.
  • Cutting depth and blade size limited by 120 mm blade diameter — not suited for very deep cuts.
  • FLEXI rail is pretensioned and may snap if handled improperly — requires careful handling.
  • Uses proprietary or CAS-compatible batteries; users outside the ecosystem may face higher battery costs.
  • Shorter continuous runtime under heavy load compared with corded high-power saws; batteries need charging.
M: OA-GPT-5-NAN

Product Specification

Type

Hand-held circular saw

Battery

2x Battery (18V, 5.5Ah, Li-Ion/LiHD)

No-load speed

6700/min

Saw blade diameter

4.72 in

Cutting capacity

1.57 in (Cutting depth at 0°), 1.06 in (Cutting depth at 45° inclination)

Blade inclination

45°/60°

Arbor bore

Bore 0.79 in

Special features

Charge level indicator, Soft grip, Parallel guide, Brushless motor, Dust extraction, Tilt function

Weight

7.94 lb

Scope of delivery

Case (T-Max), Charger, 2x Battery, Dust bag, Guide rail (FX140)

M: OA-GPT-54-NAN

Product Description

Mafell KSS40 18M bl Cordless Circular Saw — Powerful, Portable Cutting Precision

The Mafell KSS40 18M bl cordless circular saw is a compact, high-performance cross-cutting system designed for professional woodworkers who need battery-powered precision. Powered by an 18 V LiHD system and delivered as a complete kit (hard case, two 5.2Ah batteries, charger and accessories), this saw balances portability, runtime and cutting accuracy for on-site and workshop tasks.

Equipped with a brushless motor that spins the supplied carbide-tipped 120 mm blade at 6,700 rpm, the KSS40 delivers clean cuts across solid wood and engineered panels. The system supports cutting depths up to around 40–42 mm (depending on configuration) and bevel capability from 0° to 45°, making it suitable for crosscuts, rip cuts with guidance and plunge cuts when required. Its slim saw-blade body (1.8 mm tool cutting width, 1.2 mm blade body) and riving knife ensure reduced splintering and safer cutting behavior.

The kit includes practical items to get you working: a robust transport case, two long-life LiHD batteries (compatible with the Cordless Alliance System), an APS charger, a FLEXI guide rail for accurate straight or angled cuts, parallel stop, chip bag and service tool. The saw’s base and guide features allow it to interface with the FLEXI rail or to be used freehand with the parallel guide for controlled, repeatable cuts.

Safety and durability are core to the KSS40. It features upper fixed and lower retractable blade guards, a riving knife/splitter to prevent blade pinching and kickback, a quick blade-change system with flange and arbor lock, and an electronic brake. Noise and vibration figures are documented (approx. 92 dB(A) sound pressure; hand-arm vibration < 2.5 m/s2), and the instruction set highlights correct PPE (hearing and dust protection) and dust extraction requirements (minimum hose velocity noted).

Maintenance and operation are straightforward: battery insertion and removal are tool-free, cutting depth and bevel adjustments use positive clamping levers and clear scales, and blade choice recommendations (12, 24, 40 T) are provided to match material and cut type. The saw is designed for low maintenance; bearings are permanently greased, and Mafell recommends original spare parts and service where required.

Whether you need a mobile cross-cutting solution for site joinery or a compact guided saw for precision panel work, the Mafell KSS40 18M bl offers a robust, well-specified cordless option with safety features, accessory compatibility and the runtime to handle demanding tasks.

Notes

  • Use only approved blades and Mafell/CAS batteries and chargers. Protect batteries from heat, moisture and mechanical damage.
  • Always use dust extraction when cutting materials that produce significant wood dust; wear hearing and dust protection.
  • Observe riving knife and blade compatibility to avoid kickback; retract riving knife only for plunge cuts and re-install afterward.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly