Manual.ly Logo

Mafell DD40 P Manual

0.0 · 0 Ratings

PDF manual · 82 Pages

English

M: OA-GPT-54-NAN
page

/ 82

Loading...
385a1b89797d3754f4294662dbc6566e5bae page b
-11-
gesetzt. Die Maschine kann links und rechts
angeschlagen werden.
Spannen Sie das Werkstück fest oder sichern
Sie es gegen Verschieben durch Verwenden
der mitgelieferten Anti-Rutschmatten.
Setzen Sie die Maschine an das Werkstück an.
Dabei drücken Sie einen Anschlagstift 20 ein
und schlagen den anderen an die Werkstück-
Außenkante an.
Drücken Sie mit der freien Hand den
Schwenkanschlag an das Werkstück.
Schalten Sie die Maschine ein (siehe Kapitel
5.2) und schieben das Motorgehäuse bis zum
Anschlag vor.
Ziehen Sie das Motorgehäuse zurück und
schalten die Maschine aus.
5.5 Bohren mit Zusatzanschlag
siehe Seite 77
6 Wartung und Instandhaltung
Gefahr
Bei allen Wartungsarbeiten den
Netzstecker ziehen.
MAFELL-Maschinen sind wartungsarm konstruiert.
Die eingesetzten Kugellager sind auf Lebenszeit
geschmiert. Nach längerer Betriebszeit empfehlen
wir, die Maschine einer autorisierten MAFELL-
Kundendienstwerkstatt zur Durchsicht zu übergeben.
Für alle Schmierstellen nur unser Spezialfett, Bestell -
Nr. 049040 (1 kg - Dose), verwenden.
6.1 Lagerung
Wird die Maschine längere Zeit nicht verwendet, ist
sie sorgfältig zu reinigen. Blanke Metallteile mit einem
Rostschutzmittel einsprühen.
7 Störungsbeseitigung
Gefahr
Die Ermittlung der Ursachen von vorliegenden Störungen und deren
Beseitigung erfordern stets erhöhte Aufmerksamkeit und Vorsicht. Vorher
Netzstecker ziehen!
Im Folgenden sind einige der häufigsten Störungen und ihre Ursachen aufgeführt. Bei weiteren Störungen
wenden Sie sich bitte an Ihren Händler oder direkt an den MAFELL-Kundendienst.
Störung Ursache Beseitigung
Keine Netzspannung vorhanden Spannungsversorgung
kontrollieren
Netzsicherung defekt Sicherung ersetzen
Maschine lässt sich nicht
einschalten
Kohlebürsten abgenützt Maschine in die MAFELL-
Kundendienstwerkstatt bringen
Maschine bleibt während des
Bohrens stehen
Netzausfall Netzseitige Vorsicherungen
kontrollieren
Brandflecke an den Bohrungen Stumpfer Bohrer Bohrer nachschleifen oder
austauschen
Holz zu feuchtSpäneauswurf verstopft
Lang andauerndes Bohren ohne
Absaugung
Maschine an eine externe
Absaugung, z. B. Kleinentstauber,
anschließén

Chat with your Mafell DD40 P manual using AI

Get instant AI answers from your Mafell DD40 P manual

Ask anything about the Mafell DD40 P. Answers come from this manual, with the pages they are based on.

DD40 P Maintenance Schedule

After long periods of operation
Inspect by authorized service center

Hand the machine to an authorized MAFELL customer service shop for inspection after a longer period of operation.

Show in the manual (page 11)
When storing for long periods
Clean and protect metal parts

If the machine is not used for a long time, clean it carefully and spray bright metal parts with a rust inhibitor.

Show in the manual (page 11)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend DD40 P?

Yes No

Frequently Asked Questions

A

It is used for precise dowel drilling in solid wood and panel materials such as chipboard, MDF, and core board. It helps create accurate joints for furniture and cabinetry work.

Is this answer helpful?

A

Yes. The swivel range goes from 0° to 90°, so it can handle straight and angled dowel joints. It also includes quick-stop positions for common angles like 22.5°, 45°, and 67.5°.

Is this answer helpful?

A

The package includes carbide-tipped drill bits, special MAFELL dowels, a glue bottle, anti-slip mats, an Allen key, a service tool, a carrying case, and the operating manual.

Is this answer helpful?

A

The DD40 P allows drilling depths from 0 to 40 mm. This makes it suitable for a wide range of dowel joinery tasks, from lighter panel work to deeper connections in solid wood.

Is this answer helpful?

A

It is strongly recommended. The machine has a 35 mm extraction port and works best with an external dust extractor, especially when producing a lot of chips or fine wood dust.

Is this answer helpful?

A

No. It should only be used with approved dowel drill bits designed for the machine. Using the correct bits helps maintain cutting quality, safety, and motor performance.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • High precision for clean and repeatable dowel joints in wood and panel materials.
  • Flexible adjustment options for angle, depth, and edge clearance.
  • Comes with a useful accessory set, transport case, and operating manual.
  • Compact, lightweight design makes it practical for workshop and site use.
VS

Disadvantages

  • Designed for woodworking only, so it is not suitable for metal or general drilling tasks.
  • Produces noticeable noise, so hearing protection is important during use.
  • Dust extraction is strongly recommended, especially on longer drilling sessions.
  • Requires careful setup and adjustment to get the best results from each joint.
M: OA-GPT-54-NAN

Product Specification

Power

1,000 W

Weight

6.40 lb

Scope of delivery

Case (T-MAX), 6x dowel drill bits, 240-piece dowel set

M: OA-GPT-54-NAN

Product Description

Mafell DD40 P PowerMAX Duo Electric Dowel Joiner

The Mafell DD40 P PowerMAX Duo Electric Dowel Joiner incl. case + accessories Manual is built for woodworkers who value accuracy, speed, and repeatable results. Designed for solid wood and panel materials, this compact dowel joiner helps create clean, reliable joints for furniture making, cabinet work, and shop-based assembly. Its dual-dowel concept makes alignment easier and keeps production efficient when precision matters.

One of the strongest points of the DD40 P is its flexibility. The machine offers a wide swivel range from 0° to 90°, adjustable drilling depth up to 40 mm, and variable edge clearance settings. That makes it useful for both standard dowel work and more specialized applications where exact positioning is essential. The 32 mm drilling spacing is ideal for many common woodworking tasks, while the high-speed motor supports smooth, controlled drilling in different wood types.

The PowerMAX version also comes with a practical set of accessories, including carbide-tipped drill bits, MAFELL special dowels, a glue bottle, anti-slip mats, an Allen key, a service tool, and a carrying case. This makes the setup feel ready for work straight away. The included manual adds detailed guidance for adjustment, operation, storage, and maintenance, which is especially helpful for users who want consistent results and safe handling.

Dust extraction support is another valuable feature. When working on repeated joints or longer projects, keeping chips under control improves visibility and helps maintain a cleaner workspace. The machine’s safety-focused design, including contact protection and sturdy support surfaces, reflects MAFELL’s professional approach to workshop tools.

For users who want a dependable dowel joiner with a strong reputation for build quality, the DD40 P stands out as a serious workshop companion. It is especially appealing to professionals and skilled hobbyists who need a compact machine that can deliver repeatable joinery without unnecessary complexity.

Notes

  • Best suited for solid wood, chipboard, core board, and MDF.
  • Use only approved drill bits and original MAFELL accessories.
  • Ear protection, dust protection, and secure clamping are strongly recommended.
  • Regular cleaning helps keep the adjustment mechanisms working smoothly.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly