Mafell APS 18 M+ Manual
PDF manual · 76 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Mafell APS 18 M+ manual using AI
Get instant AI answers from your Mafell APS 18 M+ manual
Ask anything about the Mafell APS 18 M+. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend APS 18 M+?
Yes NoFrequently Asked Questions
It is intended for compatible 18V lithium-ion battery packs from Mafell, Metabo, and the Cordless Alliance System, also known as CAS. Do not use it to charge third-party or damaged battery packs.
Is this answer helpful?
With its 6.5A charging current, estimated times are 35 minutes for 4.0Ah, 45 minutes for 5.2Ah, and 50 minutes for 5.5Ah packs. Actual results depend on battery temperature and remaining charge.
Is this answer helpful?
The APS 18M uses a 3.0A charging current, while the APS 18M+ uses 6.5A. For the listed battery capacities, the APS 18M+ has substantially shorter estimated charge times.
Is this answer helpful?
Yes. Once charging is complete, the charger automatically changes to maintenance charging. The battery may remain installed so it is kept ready for operation.
Is this answer helpful?
A steady warning light indicates that the battery is not charging because its temperature is too high or too low. Charging begins automatically when the battery temperature is between 0 C and 50 C.
Is this answer helpful?
Remove the battery immediately. A flashing warning light can indicate a defective battery or an incorrectly positioned pack. Refit the battery correctly only if it is undamaged; otherwise replace it.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- APS 18M+ delivers 6.5A charging for estimated 4.0Ah, 5.2Ah, and 5.5Ah charge times of 35, 45, and 50 minutes.
- Compatible with Mafell, Metabo, and CAS 18V battery packs, supporting a cross-manufacturer cordless platform.
- Air cooling, self-test sequence, and operating and warning indicators support monitored charging.
- Automatically changes to maintenance charging after completion, keeping a fitted battery ready for use.
- Class II insulation and clear indoor-use guidance support safe workshop charging practices.
Disadvantages
- Requires a 230V, 50Hz mains supply, which may limit use in regions with different electrical standards.
- Not intended for outdoor, wet, rainy, or potentially explosive environments.
- Only compatible 18V Mafell, Metabo, and CAS battery packs should be charged.
- Charging time varies with battery temperature and remaining capacity.
- Damaged batteries must be removed and replaced rather than charged.
Product Specification
Type
Charger
Suitable for
Mafell
Battery voltage
18 V
Weight
2.18 lb
Product Description
Mafell APS 18M+ 18V Battery PowerStation Charger - Read, Download & Print Free
The Mafell APS 18M+ 18V Battery PowerStation Charger is designed for professionals who want dependable charging support for compatible 18V lithium-ion battery packs. Built for the Mafell battery platform and compatible Metabo and CAS battery packs, it provides a practical charging base for workshops, job sites, and tool storage areas. Its Class II insulated construction and air-cooled design support safe, consistent everyday operation when used in dry indoor conditions.
Fast charging for demanding workdays
The APS 18M+ model supplies a 6.5A charging current, making it the faster option in the range. Depending on battery temperature and remaining capacity, it can charge 4.0Ah, 5.2Ah, and 5.5Ah packs in approximately 35, 45, and 50 minutes. This helps reduce downtime when cordless tools are needed throughout a busy day.
The standard APS 18M charger uses a 3.0A charging current and offers estimated charging times of 80, 100, and 110 minutes for the same capacities. Both versions use air cooling to manage heat during charging. Actual times can vary with battery condition, residual charge, and ambient temperature.
Clear status information and ready-to-use charging
Operation is simple: slide a compatible battery pack fully onto the charging seat and the operating indicator begins to flash. When charging is complete, the charger automatically switches to maintenance charging. The battery can remain in place, allowing it to stay ready for the next task while the operating indicator remains steadily lit.
A built-in self-test runs when the charger is connected to power. The warning and operating indicators illuminate in sequence, while the internal fan runs briefly. The warning indicator also helps identify common conditions. A steady warning light can indicate that the battery temperature is outside the charging range, while a flashing warning light can signal a defective battery or an incorrectly seated pack.
Practical safety considerations
For reliable performance, keep ventilation openings clear and maintain at least 5 cm of space from surrounding objects. The charger is intended for indoor use only and should be kept dry, clean, and protected from frost. It is not suitable for rain, wet environments, or explosive areas. Inspect the charger, cable, and plug before use, and use only compatible, undamaged 18V battery packs.
Note: Use original Mafell accessories and have repairs, including cable replacement, completed by an authorized Mafell service location. Do not charge damaged or non-compatible batteries.
The Mafell APS 18M+ 18V Battery PowerStation Charger - Read, Download & Print Free is a useful reference phrase for professionals comparing charging speed, CAS compatibility, airflow cooling, status indicators, and safe battery-care practices.
Search for 67,706 Manuals online
Type-in Brand or Model