Manual.ly Logo

Mafell A18 Manual

0.0 · 0 Ratings

PDF manual · 134 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 134

Loading...
eaadf8026d39127b27bfed1a3a9802684dd1 page 16
-22-
heard while doing so) until it is not possible to turn
any further - only now the tool is reliably tensioned.
In case of a soft tool shaft, it may be necessary to
retension after a short drilling time.
Notes on ASB18 M and A18
• The ratchet sound that may be heard after
opening the chuck (functional) is switched off by
counter-rotating the sleeve.
Cleaning: Hold the machine occasionally with the
quick-release chuck pointing vertically down and turn
the sleeve completely in direction and then turn it
completely in direction . The collected dust drops
out of the quick-release chuck.
5.8.2 Quick-release bit holder
Inserting a bit: Slide the bit into the bit holder until it
audibly engages.
Removing a bit: Pull the sleeve at the bit adapter
forward until it engages and remove the bit.
The quick-change bit holder can be
used for screwing applications with
up to 8 mm countersunk screws in
wood or up to a torque of max. 60
Nm.
In the event of higher requirements,
insert the bit directly into the
spindle or use the chuck.
5.8.3 Angle attachment
The angle attachment can be used to work at right
angles to the screwdriver axle.
Slide the angle attachment completely onto the
machine until the components' profiles engage.
Adjust the clamping force at the adjusting screw (19)
(Fig. 6).
Forcefully push the clamping arm (18) down to the
limit stop, in this manner fastening the angle
attachment on the machine (Fig. 6).
If the angle attachment is not slid
onto the clamping collar, the lever
may not be pushed forcefully down.
Failure to do so can destroy the
tight fit.
5.9 Switching the LED light on/off
• Press the switch trigger (12) to switch on the
LED light (7).
• After releasing the switch trigger (12), the LED
light (7) still glows for approx. 5 sec. and then
switches off.
5.10 Belt clip
For an easier handling of the belt
clip, remove the rechargeable
battery (see chapter 5.2)
(see Fig. 4)
Detaching:
• Press the belt clip (6) together at the rear.
• Swivel it out of the rear opening.
• Slacken the belt clip and remove it from the front
opening.
Attaching:
• Press the belt clip (6) together and insert it into
the openings provided.
• The belt clip (6) can be attached on both sides.
5.11 Bit adapter
(see Fig. 1)
A screw bit can be fitted in the bit adapter (5) on both
sides.
5.12 Optical alignment (spirit level)
The bubble level (14) and circular level (15) can be
used to align the screwdriver in horizontal and vertical
direction.
6 Service and maintenance
Danger
Unplug the rechargeable battery for
all service work.
MAFELL machines are designed to be low in
maintenance.
Always keep the appliance clean.
Should the appliance fail despite thorough
manufacturing and testing procedures, the repair

Chat with your Mafell A18 manual using AI

Get instant AI answers from your Mafell A18 manual

Ask anything about the Mafell A18. Answers come from this manual, with the pages they are based on.

A18 Maintenance Schedule

Before long-term storage
Clean and protect metal parts

Thoroughly clean the machine if not used for a long period. Spray bare metal parts with a rust-proofing agent.

Show in the manual (page 23)
Occasionally
Clean quick-release chuck

Hold the machine vertically down and turn the sleeve completely in both directions to let collected dust fall out of the chuck.

Show in the manual (page 22)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend A18?

Yes No

Frequently Asked Questions

A

The maximum torque is 130 Nm when operating in the second gear for hard tightening applications. The soft torque is 65 Nm, and the impulse torque is also 65 Nm.

Is this answer helpful?

A

Yes, the ASB18 model is suitable for impact drilling into concrete, brick, and masonry. The maximum drill diameter for concrete is 16 mm.

Is this answer helpful?

A

Press the button marked as capacity display to query the charge condition. Read the capacity levels using the three LED lights located on the power switch area.

Is this answer helpful?

A

Yes, the belt clip can be removed and is mountable on either side of the tool. It should be removed for easier handling or replacement of the battery.

Is this answer helpful?

A

Wear ear protection for impact drilling operations due to loud noise. Use a dust mask and extraction system when drilling materials that generate harmful dust like lead paint or minerals.

Is this answer helpful?

A

If the machine switches off due to overload, release the trigger and allow the machine and battery to cool down. The machine cools faster when idle after being switched on again.

Is this answer helpful?

A

The kit includes the screwdriver, quick-release chuck, rechargeable battery, charger, additional handle, quick-change bit holder, belt clip, and the operating manual.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • High maximum torque of 130 Nm for hard applications.
  • Two speed gears optimize speed and torque for different tasks.
  • Cordless Alliance System compatibility offers versatile battery options.
  • Built-in LED light improves visibility in dark work areas.
  • Belt clip and auxiliary handle enhance portability and control.
VS

Disadvantages

  • Weight increases significantly with larger 5.5 Ah batteries attached.
  • Impact function generates loud noise requiring ear protection.
  • Specific disposal rules apply to lithium-ion batteries and recyclers.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Drill Driver

No-load Speed

0-560 / 0-1960 RPM

Drilling Capacity

Steel 0.51", Wood 2.68"

Torque

47.94 / 95.88 ft-lbs soft/hard, 11 Settings (10+1)

Chuck

0.39" Keyless Chuck, 1/4" Bit Chuck

Features

Forward/Reverse, Speed Control, Two-Speed, Torque Settings, Battery Charge Indicator, LED Work Light, Softgrip, Auxiliary Handle, Quick Stop, Brushless Motor, Belt Clip, Bit Depot

Weight

3.97 lbs (inc. battery)

M: qwen/qwen3.5-flash-20260224

Product Description

The Mafell A 18 Cordless Screwdriver: Precision Power

When you need a reliable tool that delivers power without compromise, the Mafell A 18 Cordless Screwdriver stands out in the crowded marketplace. This 18-volt power tool represents the pinnacle of German engineering designed for demanding tasks. Whether you are drilling into steel or driving screws into heavy timber, this machine handles the job with exceptional control. Technical specifications confirm capability to reach high speeds while maintaining stability.

The core of this system is its robust 18-volt battery architecture. Compatible with the Cordless Alliance System, power options range from 4.0 Ah to 5.5 Ah. This flexibility ensures longer runtimes for projects without constant recharging interruptions. The tool features two speed gears, allowing for a maximum of 1960 rpm for drilling or 560 rpm for high-torque screwdriving. Users can adjust torque settings to suit specific fasteners, preventing damage to soft materials effectively.

Ergonomics are not an afterthought here. The addition of an auxiliary handle ensures secure grip during high-torque operations. A belt clip keeps the unit accessible at all times, keeping your workflow uninterrupted. An LED light illuminates your work area, crucial for precision work in dimly lit environments. The chuck opens quickly, facilitating fast bit changes between drilling and driving applications. This setup reduces downtime during busy workdays significantly.

Safety remains a priority throughout the design. Insulated gripping surfaces protect against hidden wiring contact. Guidelines emphasize the importance of hearing protection when using impact functions on masonry. It also advises on dust extraction when working with hazardous materials. Proper ventilation is key when drilling to avoid inhaling harmful particles.

Maintenance is straightforward. The unit is designed for low maintenance requirements but should remain clean. Storage requires a dry place, and battery health is monitored via LED indicators. When the machine switches off unexpectedly due to overload, it cools down efficiently. This resilience ensures longevity in professional workshops.

Notes

Always read safety instructions before operation. Check battery levels regularly. Ensure the transport lock is engaged when carrying the device to prevent accidents.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly