Mafell A10 M Manual
PDF manual · 74 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Mafell A10 M manual using AI
Get instant AI answers from your Mafell A10 M manual
Ask anything about the Mafell A10 M. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend A10 M?
Yes NoFrequently Asked Questions
It is intended for drilling in wood, metal, plastic, and similar materials. It can also be used for screwdriving and tapping when the correct accessory and operating settings are selected.
Is this answer helpful?
The stated maximum drilling diameter is 10 mm in steel and 22 mm in wood. The quick-release chuck accepts drill bits and accessories with shank diameters from 1 to 10 mm.
Is this answer helpful?
Yes. First gear runs from 0 to 360 rpm for controlled fastening, while second gear runs from 0 to 1,400 rpm for drilling. Trigger pressure provides variable speed within each range.
Is this answer helpful?
The set includes the cordless drill driver, quick-release chuck, 2.0 Ah battery, 4.0 Ah battery, charger, PZ2 screwdriver bit, angle attachment, and a belt clip.
Is this answer helpful?
The angle attachment allows drilling and fastening at right angles to the tool axis. It can be positioned in 30-degree increments, improving access inside cabinets, near framing, and in other tight locations.
Is this answer helpful?
Release the trigger and check battery charge, binding, and tool temperature. A low battery, overload, or overheating condition can activate electronic protection. Allow the tool and battery to cool before continuing.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Lightweight 0.8 kg body helps reduce fatigue during overhead, repetitive, and confined-space tasks.
- Two-speed gearbox and variable trigger provide controlled screwdriving and drilling up to 1,400 rpm.
- Includes 2.0 Ah and 4.0 Ah batteries, charger, quick-release chuck, PZ2 bit, belt clip, and angle attachment.
- Angle attachment adjusts in 30-degree increments for drilling and fastening in difficult-to-reach areas.
- LED work light, reversible belt clip, bit holder, and battery indicator support efficient daily use.
Disadvantages
- Maximum drilling capacity is limited to 10 mm in steel and 22 mm in wood.
- The 10.8 V platform is best suited to light and medium-duty work rather than demanding heavy-duty drilling.
- Gear selection must only be changed when the motor is fully stopped.
- Sustained heavy loads can trigger thermal protection, requiring time for the tool and battery to cool.
Product Specification
Type
Drill driver
No-load speed
0-360 / 0-1,400 RPM
Drilling capacity
Wood 0.87 in, steel 0.39 in
Torque
12.54/25.08 ft-lb soft/hard, 20 settings
Tool holder
0.39 in keyless chuck, 1/4 in bit holder
Features
Forward/reverse, speed control, multi-speed, torque preselection, battery charge indicator, LED work light, belt clip, bit holder
Weight
1.76 lb (including battery)
Included
Case (T-Max), charger, 2x battery, screwdriver bit, A-SBF 10 chuck attachment, bit holder attachment, A-SWV 10 angle attachment
Product Description
Mafell A 10 M MidiMAX Cordless Drill Driver - Read, Download & Print Free
The Mafell A 10 M MidiMAX Cordless Drill Driver is a compact professional tool built for accurate drilling, fastening, and tapping in wood, metal, plastic, and similar materials. Its 10.8 V platform combines low weight with practical output, making it a strong choice for installers, cabinetmakers, carpenters, and tradespeople who need dependable performance without carrying a bulky drill.
At only 0.8 kg without the chuck, the A 10 M is designed to reduce fatigue during overhead work, repetitive fastening, and long days on site. Despite its compact profile, it delivers up to 34 Nm of hard torque and 17 Nm of soft torque. This balance gives users controlled driving power for screws while retaining the finesse needed for delicate fittings and finished surfaces.
Two-Speed Control for Versatile Work
The two-speed gearbox offers a low range of 0-360 rpm for controlled screwdriving and a high range of 0-1,400 rpm for drilling. Variable speed is managed through the trigger, allowing the operator to start holes carefully and adjust pace as material conditions change. A torque-adjustment ring provides multiple settings, including a drilling mode with maximum torque and no torque limitation.
The quick-release chuck accepts accessories from 1 to 10 mm and supports drilling capacities of up to 10 mm in steel and 22 mm in wood. A practical bit holder keeps one screwdriver bit close at hand, while the integrated LED light improves visibility in cabinets, corners, and other dim work areas.
Built for Access and Everyday Convenience
A key highlight is the included angle attachment. It enables drilling and screwdriving at right angles to the tool axis, with adjustment in 30-degree increments. This makes the drill driver especially useful for assembly tasks in narrow spaces where a standard drill cannot be positioned comfortably.
The package also includes 2.0 Ah and 4.0 Ah lithium-ion batteries, a charger, a PZ2 bit, a quick-release chuck, and a reversible belt clip. The belt clip can be mounted on either side, helping left- and right-handed users keep the tool accessible between tasks.
Notes
The drill driver includes battery capacity indication and electronic protection that helps prevent deep discharge, overload, and overheating. Let the tool and battery cool after sustained heavy use, remove the battery before adjustments or cleaning, and store the equipment dry at 10 to 30 degrees C for best battery care.
Search for 67,706 Manuals online
Type-in Brand or Model