Manual.ly Logo

Lupine SL Nano AF Manual

0.0 · 0 Ratings

PDF manual · 15 Pages

English

M: QW-35-FL
page

/ 15

Loading...
f074a71217257e79902e553c6474e29ab4d2 page 8
English
15
Warning!
Avoid looking directly into the light emitted by the light or shining the light into your own eyes or
the eyes of another person. If the light accidentally shines into your eyes, close your eyes and move
your head out of the light beam. Do not use any strongly focusing optical device to look at the light
beam.
In cases where the light is used in a public or commercial setting, users should be provided with trai-
ning concerning the safety measures for laser light.
This device may then be used by children 8 years of age or older, persons with limited physical,
sensory or mental capabilities, as well as persons with no previous experience in handling such
devices, if they are supervised by a person responsible for their safety.
Carry a spare light with you at all times, as the product can potentially fail unexpectedly at any
time.
Defects:
Light source must be replaced in general if the light source (or one of the LEDs) is defective.
In the event of any physical or internal battery failure, do not attempt to repair.
No user-servicable parts!
Heat generation:
The housing of SL may heat up; so make sure that you always keep the light at a safe distance to
any combustible or flammable materials. Could cause fire or death! However, quiescent operation
(without cooling the light housing via airflow or the like) is possible at any time and will not damage
the product.
Water resistance:
All SL components are waterproof and can of course be used under extremely severe
conditions. The lamp complies with IP protection class 68 but is NOT a diving lamp and is
NOT suitable for use under water.
Cleaning:
Do not use a strong water jet or heavy detergent to clean the lamp.
Safety instructions

Chat with your Lupine SL Nano AF manual using AI

Get instant AI answers from your Lupine SL Nano AF manual

Ask anything about the Lupine SL Nano AF. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend SL Nano AF?

Yes No

Frequently Asked Questions

A

Connect the battery to the lamphead to enter receiving mode for 15 seconds. Press the large button on the remote for 5 seconds until it lights up blue, then release immediately to pair them.

Is this answer helpful?

A

With the 3.5Ah battery, the light lasts up to 8 hours and 20 minutes in Eco mode. In high beam, it runs for approximately 1 hour and 50 minutes.

Is this answer helpful?

A

Yes, the SL Nano AF has an IP68 protection class, making it waterproof and suitable for use in heavy rain and muddy conditions.

Is this answer helpful?

A

Yes, if the battery reaches a critically low level, the light will switch to reserve mode and eventually shut off automatically to protect the battery from deep discharge.

Is this answer helpful?

A

No, the standard two-year warranty covers manufacturing defects in all components except the battery itself.

Is this answer helpful?

A

Press the touchpad on the remote once to hear an audible signal and see the LED strip light up, indicating the remaining percentage in 20% steps.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Intelligent auto-function adjusts light intensity based on ambient conditions
  • IP68 waterproof rating ensures performance in all weather conditions
  • Bluetooth remote control allows seamless operation without hand removal
  • Smartcore battery provides accurate visual and audible capacity indicators
  • Compact and lightweight design weighs only 65 grams for the head unit
VS

Disadvantages

  • Warranty does not cover the battery despite its critical importance
  • Maximum light output requires airflow cooling and reduces if stationary
  • Cannot be used underwater despite high IP68 water resistance rating
  • High beam function drains battery faster than other modes
  • Requires specific Torx tools for remote battery replacement
M: QW-35-FL

Product Specification

Type

Headlight, safety light

Colors

black

Max. Light Output

1100 lm

Bulb

2x Osram Compact PL LED

Max. Run Time

3.1 h

Min. Run Time

1.5 h

Charge Time

1.8 h

Light Mode

Constant light (2 levels)

Power Supply

Battery (3500 mAh)

Mounting

Loop

Dimensions

1.61x1.18 in

Weight

1.84 oz

Features

waterproof, dustproof, parking light, compliant with road traffic regulations

M: QW-35-FL

Product Description

Experience the Lupine SL Nano AF 3.5Ah Front Light

The Lupine SL Nano AF 3.5Ah Front Light represents a pinnacle of engineering for cyclists who demand reliability and brilliance on every ride. This compact powerhouse is designed to illuminate your path with precision, utilizing advanced Osram Automotive LEDs housed within a sleek biconical TIR lens system. Weighing only 65 grams for the head unit, it integrates seamlessly into any bike setup without adding unnecessary bulk.

One of its standout features is the intelligent Auto-Function (AF) technology. The built-in brightness sensor constantly monitors ambient light levels. When you enter a dark tunnel or ride under heavy tree cover, the light automatically switches from daytime running mode to low beam, ensuring optimal visibility without manual intervention. It offers three distinct modes: a powerful high beam delivering up to 14 watts and 1100 lumens, a versatile low beam at 8 watts providing 700 lumens, and an energy-saving daytime running light at just 2 watts.

The included 3.5Ah Smartcore battery is a marvel of modern power management. It features a clear capacity indicator using five red LEDs that display charge levels in precise steps, allowing riders to monitor their remaining range with confidence. Whether you are tackling short commutes or long endurance rides, the runtime adapts to your needs, offering up to 8 hours and 20 minutes in eco mode. The system is fully waterproof with an IP68 rating, making it resilient against rain, mud, and splashes, though it is not intended for submersion.

Control is effortless thanks to the Bluetooth remote control, which pairs directly with the lamp. You can switch between modes, activate reserve power, and turn off the light with intuitive button presses. The remote also features a movement sensor that disconnects after five minutes of inactivity to preserve battery life. For added safety, the housing manages heat effectively, preventing overheating even during stationary operation, though users should maintain a safe distance from flammable materials due to potential warmth.

Key Features Summary

The Lupine SL Nano AF combines durability, smart automation, and superior light output. Its aluminum construction ensures longevity, while the automatic dimming saves energy when full brightness isn't required. The inclusion of a spare light recommendation in the manual highlights the brand's commitment to rider safety.

Important Notes

Always ensure the battery is fully charged before storage. Never attempt to open the lamp head yourself as this voids the warranty and compromises water resistance. Use only the specified Wiesel charger for Li-Ion batteries to avoid explosion risks.

M: QW-35-FL

© Copyright 2026 Manual.ly