Manual.ly Logo

Lupine SL AX Manual

0.0 · 0 Ratings

PDF manual · 19 Pages

English

M: QW-35-FL
page

/ 19

Loading...
caf452b024485ba9822d054c4d8ba83be9a5 page 10
30
SL AX StVZO
Product Care, Storage and Charging
Product Care and Storage
Light:
After use in dirty areas clean the lamp and the cables externally with warm water and some mild
detergent. Important! Because of the delicate sealings, we do not recommend to open the lamp.
A leakage in consequence of opening the light is excluded from warranty! Before you try to repair
something on your own get in touch with our helpful Service Team.
Transport:
Important: Always keep the battery separate from the light, because otherwise the small amount of power
used by the electronics will discharge the battery, and the lamp may switch on accidently. Important! Mo-
reover, the consequent uncontrolled heat buildup could cause a fire or melt the adjacent plastic material.
Battery:
If you intend not to use the lamp for a longer period of time, fully charge and store it at a cold and dry
place.
Charging batteries:
1. Plug the included Wiesel charger into an outlet
2. Connect the charger to the battery, charging starts automatically the LED turns red
3. When the battery is fully charged the LED on charger turns green
Warning! This charger is to be used to charge rechargeable Li-Ion batteries only.
It is NOT suitable for charging NiMH batteries!
Do NOT use non-rechargeable batteries. – Risk of explosion!
This charger may be opened ONLY by the manufacturer!
English
31
SL AX StVZO
Troubleshooting
Problem
The lamp doesn‘t light
The power LEDs do not come
on.
The runtime is too short.
Even after charging only
the 20% LED will light up
at the Smartcore battery.
The sensor does not respond.
Cause
Extremely discharged battery
Battery not plugged into the
light or not plugged in
properly
Faulty LED unit
Discharged or old battery
Old battery
Low ambient temperature
Faulty charger
Unsuitable battery
The indicator was reseted
The sensor is not exposed
Solution
Charge the battery
Check all plug contacts
LED units needs replacement
Get in touch with Lupine
Charge battery
Replace battery
Keep battery warm
Replace charger
Use original Lupine battery
Discharge the battery with
your light and fully charge it
afterwards
Make sure the sensor is free
from any dirt
The lamp does not recognize
the transmitter.
Lamphead and transmitter
are not linked.
See chapter operation
remote control.
Button cell empty or wrong
side up.

Chat with your Lupine SL AX manual using AI

Get instant AI answers from your Lupine SL AX manual

Ask anything about the Lupine SL AX. Answers come from this manual, with the pages they are based on.

SL AX Maintenance Schedule

After use in dirty areas
Clean the lamp and cables

Clean externally with warm water and mild detergent. Do not use strong water jets or harsh detergents.

Show in the manual (page 16)
When voltage is low
Replace remote control button cell

Open the transmitter housing using a T5 star drive key, insert a new CR2032 battery, and tighten screws until the seal is visibly squeezed.

Show in the manual (page 14)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend SL AX?

Yes No

Frequently Asked Questions

A

The light produces a maximum of 3800 lumens for high beam performance.

Is this answer helpful?

A

Yes, you can replace the rechargeable Li-Ion battery after its lifespan ends.

Is this answer helpful?

A

No, the IP68 rating means it is waterproof but not intended for diving.

Is this answer helpful?

A

The Lupine Light Control app for iOS and Android handles settings and profiles.

Is this answer helpful?

A

Hold the big button for 5 seconds while the lamp head is in sync mode.

Is this answer helpful?

A

The light will blink and sound an alarm. You must stop riding immediately.

Is this answer helpful?

A

There is a 24 month warranty for components but the battery is excluded.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High 3800 lumen output ensures excellent visibility for night riding
  • IP68 waterproof rating protects against rain and mud during severe conditions
  • Smart battery indicator provides clear remaining power information
  • Bluetooth connectivity allows remote control and smartphone integration
  • Motion sensor saves energy by disconnecting when stationary
VS

Disadvantages

  • Battery is not covered under the standard two year warranty
  • Lamp housing generates heat requiring distance from flammable items
  • Do not attempt repairs yourself as warranty voids if opened
  • Not suitable for submersion despite high water resistance rating
  • Complex setup instructions require careful reading of manual
M: QW-35-FL

Product Specification

Type

Headlight

Colors

Black

Max. Light Output

3800lm, 340 LUX

Light Source

13x Osram Compact PL LED

Light Mode

Continuous Light (5 Levels)

Mounting

Mount

Dimensions

1.77x3.35x1.89in

Features

Waterproof (IPX7), Dustproof, Daytime Running Light, Light Sensor, Remote Control, Road Traffic Compliant

M: QW-35-FL

Product Description

Experience the Lupine SL AX Front Light Manual

Unleash Maximum Visibility

Riding at night demands safety and visibility. The Lupine SL AX Front Light sets a high bar for performance on the road. This detailed Lupine SL AX Front Light Manual provides everything you need to know about operating this powerful device. With up to 3800 lumens, riders gain superior illumination in any condition. The light ensures you see the path ahead while making you visible to others. It utilizes fourteen Osram LEDs and a Fresnel lens system for optimized light distribution.

Installing the lamp is straightforward with the included quick release system. Positioning the unit centrically on the handlebar is crucial. Adjust the beam tilt so that at five meters the light center is half the height of the output. This prevents blinding oncoming traffic. The battery attaches via velcro straps designed for various tube sizes. Security comes from the anti-slip coating on the underside of the strap. One O-ring sits between the holder and lamphead while the other is between holder and screw.

Runtime varies based on battery selection. Users can choose between seven amp hours, ten amp hours, or fourteen amp hours options. High beam runs for a shorter duration while low beam offers extended light. The Smartcore battery indicator shows remaining capacity clearly. Five LEDs display the charge level with blinking and steady states for precision. Audible warnings alert you when power is critically low during operation. High beam consumes 38 watts while low beam uses 8 watts.

Advanced features include a brightness sensor that switches automatically between daytime running light and low beam modes. A motion sensor disconnects the remote if no movement is detected for five minutes to save energy. Reconnection requires significant motion. The integrated Bluetooth remote control allows manual switching for high beam or dimming options. You can program specific light delays for custom preferences. Eco mode reduces high beam brightness to 22 watts for longer range.

Connectivity extends to the Lupine Light Control smartphone app. This tool lets you create custom profiles for different activities. Settings like sensor sensitivity or trail modes are adjustable. The lamp head and app connect quickly during a twenty second window. The device withstands harsh weather with an IP68 rating. However, submersion is not recommended. Cleaning should be done with mild soap and water rather than high pressure jets.

Maintenance involves proper charging protocols. Use only the specified Li-Ion charger. Non-rechargeable batteries are strictly prohibited due to explosion risks. Never open the lamp housing yourself to preserve warranty and water resistance. If defects occur, contact the manufacturer directly. The warranty covers manufacturing faults for two years but excludes the battery. Always store batteries in cool dry places when not in use to maintain longevity. Heat generation is notable so maintain distance from flammable materials.

Troubleshooting is outlined clearly in the guide. If the lamp does not turn on check battery connections or charge levels. The remote requires pairing which involves holding the button until it lights blue. If the battery is old replace it for better performance. Keep sensors free from dirt and obstruction for optimal functionality. This equipment represents top-tier engineering for serious cyclists. It is designed for reliability in extreme temperatures ranging from negative twenty five to plus seventy degrees Celsius.

M: QW-35-FL

© Copyright 2026 Manual.ly