Manual.ly Logo

LS2 FF384 Manual

0.0 · 0 Ratings

PDF manual · 22 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 22

Loading...
e3a12a979fe6154e4dfa9a260894137ef159 page 5
9
EN
ES
FR
IT
DE
. NEVER MODIFY YOUR HELMET
Punching holes, cung the shell or the material on the inside is very dange-
rous. Modicaons may weaken the helmet. Modifying the locking system
may also weaken the helmet and it may break in case of accident. Removing
parts such as the chin-strap or other parts may leave cung edges of the
shell uncovered which may be very dangerous in case of accident. Always use
original LS2 spare parts: screens, screws and other parts.
. DO NOT MISTREAT YOUR HELMET
Never drive with the helmet hanging from the locking system and do not
hang the helmet on a support, for example, a mirror. Do not sit on the helmet
and do not throw it. You should not expose the inside of the helmet to sun
light or sources which generate excessive heat such as heaters, which may
produce temperatures higher than 50ºC (122ºF). Avoid exposing the helmet
to an-mosquito sprays. If you do not treat your helmet correctly, the shell
and the inside could weaken and it could lose its capacity to protect you in
case of accident.
. DO NOT REPAINT THE HELMET
We do not recommend repainng the helmet given that the paint may dama-
ge the materials used in its manufacturing. A helmet damaged and weakened
by a paint agent may not oer protecon in case of accident, causing severe
injuries or even death. If you need to paint your helmet, please contact your
LS2 supplier.
. ALWAYS CHECK YOUR HELMET BEFORE
DRIVING YOUR MOTORCYCLE
8.1. Check the screen and the screws of the mechanism and reghten them
if necessary.
8.2. Check possible impacts or breaks in the helmet. Acids (for example, acids
from baeries) may deteriorate the screen.
8.3. Plasc components may deteriorate aer 5 years from their manufac-
turing date. If you nd any deteriorated component, replace it or buy a new
one. If these parts get loose or lost while driving, your vision may be blocked
which could provoke an accident, causing you severe injuries or even death.
8.4. Check the safety of the locking system.
8.5. Make sure that centre and side pads are rmly secured before using the
helmet.
. KEEP THE SCREEN OF THE HELMET IN
GOOD CONDITION
If your screen is too scratched, replace it with a new one. Bad visibility causes
accidents. Clean your screen with soapy water and dry it with a so and dry
cloth. Never use gasoline, glass cleaners or any other solvent.
Do not sck any adhesives or adhesive tape to the screen since this would
weaken its protecon. This can damage the screen. Do not drive with a fo-
gged up screen. Bad vision can provoke an accident, causing severe injuries
or even death.
. REMEMBER HELMETS SOFTEN IMPORTANT
SOUNDS AND REDUCE WARNINGS OF ENVIRON
MENTAL CHANGES
When using a helmet, especially of the integral variety, in a way, you are
isolated from the exterior. Climac changes may catch you o guard: sud-
den storms, temperature changes while entering and exing tunnels or going
through mountain passes may cause humidity or lack of visibility on your
screen. Do not drive with a fogged up screen.
Using a helmet reduces your ability to hear the sound of trac, especially
at high speed. When using an integral helmet, having the screen opened or
closed makes a big dierence. For safe driving, analyze how the level of speed
and the type of helmet aect the percepon of the road condions and whe-
ther the screen has to be opened or closed.

Chat with your LS2 FF384 manual using AI

Get instant AI answers from your LS2 FF384 manual

Ask anything about the LS2 FF384. Answers come from this manual, with the pages they are based on.

FF384 Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace deteriorated plastic components

Plastic parts may deteriorate after five years from manufacturing. Replace any damaged or loose components immediately.

Every ride
Check screen and screws

Inspect the screen and mechanism screws before driving. Tighten them if necessary.

Every ride
Check locking system safety

Verify that the locking system is secure and functioning correctly before use.

Every ride
Check interior pads security

Ensure center and side pads are firmly secured before using the helmet.

As needed
Clean helmet with soapy water

Mix five to six drops of neutral soap with warm water. Clean the helmet with a soft damp cloth. Do not use hot water, salt, gasoline, or solvents.

As needed
Clean and replace screen

Clean the screen with soapy water and dry with a soft cloth. Replace if scratched or fogged up.

After impact
Replace helmet after impact

The helmet absorbs only one impact. Replace it with a new one immediately after any accident or fall, even if no damage is visible.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend FF384?

Yes No

Frequently Asked Questions

A

You need to wrap a measuring tape around your head 2.5 cm above your eyebrows. This will establish the longest measurement around your head to determine the correct circumference size for the adult or mini fit.

Is this answer helpful?

A

Even if it looks perfect, the helmet absorbs energy and loses capacity. You must replace it with a new one immediately because the inside is compacted and no longer offers the same protection in an accident.

Is this answer helpful?

A

No, we do not recommend repainting. Paint may damage materials and weaken the shell. If you need to paint, contact your supplier as a painted helmet may not offer protection against accidents.

Is this answer helpful?

A

Mix five or six drops of neutral soap with half a litre of warm water. Use a soft cloth in the soapy solution to clean the helmet. Do not use hot, salty water, gasoline, or glass cleaners.

Is this answer helpful?

A

Ensure the inside covers your entire head. Check side pads contact cheeks. Confirm no space between inside and neck. Try to move helmet upwards; skin should stretch. If it moves easily, it is too big.

Is this answer helpful?

A

Punching holes or cutting the shell weakens the structure. Removing parts may leave cutting edges exposed. Modifications may cause the helmet to break in case of an accident leading to severe injury.

Is this answer helpful?

A

If the strap does not touch your chin or is loose, an impact can cause the helmet to fall off. This leaves your head unprotected resulting in severe injury or death. Ensure it is knotted securely.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Advanced research ensures high level of aerodynamics and comfort for riders on the road.
  • Extensive size range fitting adults and mini circumferences effectively for everyone.
  • Designed to offer maximum protection through active safety standards and research.
  • Cleanable with neutral soap to maintain material integrity over time.
  • Original spare parts available for screens and screws to ensure compatibility.
VS

Disadvantages

  • Helmet must be replaced after any significant impact event regardless of visual damage.
  • Strict cleaning rules forbid solvents or hot water to protect material integrity.
  • Helmets dampen important sounds reducing hearing ability to environmental changes.
  • Plastic components may deteriorate after 5 years requiring replacement for safety.
  • Do not repaint helmet as paint damages materials used in manufacturing.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Full-face helmet

Features

Integrated sun visor

Weight

3.42 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Experience Active Protection with the LS2 FF384

Overview of the Product

The LS2 FF384 (different colors/sizes) represents the pinnacle of rider safety and style for modern motorcyclists. Designed through advanced research in active safety and design, this helmet offers the highest level of aerodynamics and comfort for road performance. Whether for leisure, tourism, or sport, finding the perfect solution for active protection is crucial. This gear ensures maximum protection while extending usable life through proper care and adherence to manufacturer guidelines. All our products are the result of the most advanced research in terms of active safety. The highest level of aerodynamics and comfort will offer you the best performance on the road. Whatever type you choose, one of the LS2 helmets will surely be the best solution for your active protection.

Sizing and Fit Details

Choosing the correct helmet size is vital for safety and comfort. Measure your head size by wrapping a measuring tape around your head 2.5 cm above your eyebrows. This establishes the longest measurement around your head. For adults, sizes range from XXS at 51 cm up to 3XL at 65 cm depending on the specific model configuration. Mini circumferences also exist starting at 47 cm. When in doubt between two sizes, always choose the smaller of the two to ensure a snug fit. The helmet must cover your entire head without spaces at the forehead or neck. When in doubt try to move the helmet upwards and downwards. If you can move it easily, it is too big.

Checking the Locking System

Proper locking system adjustment is extremely important for preventing injuries. Tighten the locking system as much as possible without causing pain. The ends of the straps must be secured to your chin. With the lock knotted, place hands on the rear and front to try and take it off. If the helmet starts moving in any direction while knotted, it is too big or the system is not tight enough. Never use a helmet which you can take off your head while the locking system is knotted. This could fall off in case of accident causing death or severe injuries.

Safety Recommendations

No helmet can protect you against all possible impacts at low and high speeds. Helmets are designed to absorb one impact only. After an impact, replace it with a new one even if it looks perfect. The inside absorbs impact and becomes compacted. Avoid modifying your helmet by punching holes or cutting the shell. Modifications may weaken the helmet and it may break. Remove parts leaves cutting edges uncovered which is dangerous. Always use original LS2 spare parts.

Care and Maintenance

Keep the screen in good condition. If too scratched, replace it. Clean your screen with soapy water. Never use gasoline or glass cleaners on the screen. Avoid exposing the helmet to sources generating excessive heat such as heaters above 50 degrees. Do not repaint it as paint damages materials. If you need paint contact supplier. Plastic components may deteriorate after 5 years. Check for impacts or breaks before riding. If these parts get loose, vision may be blocked.

Environmental Awareness

Remember that helmets cushion important sounds and reduce warnings of environmental changes. When using an integral variety, you are isolated from the exterior. Climatic changes may catch you off-guard like sudden storms. Using a helmet reduces your ability to hear the sound of traffic. For safe driving analyze how level of speed affects perception. Do not drive with a fogged up screen. Bad vision can provoke an accident. Always check centre and side pads are firmly secured before using.

Final Notes

Always check your helmet before driving your motorcycle. Verify the screen, screws, and locking safety components. If unsure about single impact rule contact LS2 supplier. Treat your helmet correctly to maintain shell and inside strength. If treated correctly it retains capacity to protect you.

Pros and Cons

Pros

  1. Advanced research ensures high level of aerodynamics and comfort.
  2. Extensive size range fitting adults and mini circumferences effectively.
  3. Designed to offer maximum protection through active safety standards.

Cons

  1. Helmet must be replaced after any significant impact event regardless of visual damage.
  2. Strict cleaning rules forbid solvents or hot water to protect material integrity.
  3. Helmets dampen important sounds reducing hearing ability to environmental changes.
M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly