Manual.ly Logo

Lionelo Bastiaan i-Size Manual

0.0 · 0 Ratings

PDF manual · 144 Pages

English

M: OA-GPT-5-NAN
page

/ 144

Loading...
87069ccfbf5b5d98ebfda8c15fd0a37efd76 page a
‑ 10 ‑
EN
EN
Dear customer!
Should you have any remarks or quesons concerning the product, please do not hesitate
to contact us: [email protected]
Producer:
BrandLine Group Sp. z o. o.
A. Kręglewskiego 1, 61-248 Poznań, Poland
The product meets the requirements of the standard: R129/03.
Informaon for the growth group from 40 to 105 cm (maximum weight of the child 21 kg)
NOTICE This is an i-Size Enhanced Child Restraint System. It is approved according to UN
Regulaon No 129, for use in, i-Size compable vehicle seang posions as indicated by
vehicle manufacturers in the vehicle users’ manual. If in doubt, consult either the Enhanced
Child Restraint System manufacturer or the retailer.
Informaon for the growth group from 100 to 150 cm
NOTICE This is a i-Size booster seat Enhanced Child Restraint System. It is approved
according to UN Regulaon No 129, for use primarily in “ i-Size seang posions” as
indicated by vehicle manufacturers in the vehicle user’s manual. If in doubt, consult either
the Enhanced Child Restraint System manufacturer or the retailer.
The product is suitable for installaon only on the places marked with the symbol
in
g. B, marked i-Size.
The product is suitable for installaon in the seat marked with the symbol
in g. A only
forward facing and with the airbag inacve. It is recommended to install the seat only on
the rear seats of the car.
The product is suitable for installaon on the seat marked with the symbol in g. A only
if the seat is equipped with a seat belt.
WARNINGS:
1.
The product is designed for children weighing up to 36 kg and with a height between
40 and 150 cm.
2. If your child is less than 15 months old or less than 76 cm tall, do not use a forward-
facing seat.
3.
Hard parts and plasc parts of the child restraint system should be placed and installed

Chat with your Lionelo Bastiaan i-Size manual using AI

Get instant AI answers from your Lionelo Bastiaan i-Size manual

Ask anything about the Lionelo Bastiaan i-Size. Answers come from this manual, with the pages they are based on.

Bastiaan i-Size Maintenance Schedule

As needed
Wash the fabric cover

Hand wash at a maximum temperature of 30°C. Do not use a dryer or expose to sunlight for drying.

Show in the manual (page 17)
As needed
Clean plastic parts

Wipe with a damp cloth and mild detergent. Do not use strong detergents or bleaching agents.

Show in the manual (page 17)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Bastiaan i-Size?

Yes No

Frequently Asked Questions

A

The Bastiaan covers children from about 40 cm up to 150 cm in height, with configurations for rear‑facing (40–105 cm, up to 21 kg), forward‑facing harness (76–105 cm, up to 21 kg) and booster mode (100–150 cm). Maximum tested weights vary by configuration; follow the manual limits.

Is this answer helpful?

A

Yes. The Lionelo Bastiaan is approved to UN Regulation No. 129 (R129), commonly referred to as i‑Size, meaning it meets modern European safety and compatibility requirements for i‑Size marked vehicle seating positions.

Is this answer helpful?

A

Extend and anchor ISOFIX arms using the sliding levers until they click and show green indicators. Route and attach the Top Tether to vehicle anchor points, tighten until the Top Tether indicator is green, press the seat against the vehicle backrest and confirm secure anchorage before seating the child.

Is this answer helpful?

A

No. The manual advises not to use forward‑facing for children under approximately 15 months or under 76 cm in height; small children should remain rear‑facing per the specified height and weight ranges.

Is this answer helpful?

A

Remove and hand wash the fabric cover at max 30°C; do not tumble dry or dry in direct sunlight. Clean plastic parts with a damp cloth and mild detergent. Avoid strong detergents or bleach; follow the manual for cover removal and reinstallation.

Is this answer helpful?

A

If the seat has been exposed to strong forces such as an impact, it should be replaced. Structural integrity can be compromised after a collision and the manufacturer guidance and regulations recommend replacement.

Is this answer helpful?

A

No. The manual specifies the cover is an integral part of the system and must not be replaced with items from another set, since it affects the restraint’s operation.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Certified to UN R129 i‑Size standard ensuring contemporary crash protection and compatibility with i‑Size seating positions.
  • Multiple installation modes (rear‑facing, forward‑facing harness, and booster) extend usable lifespan from infancy to older child.
  • ISOFIX arms with green/red indicators and Top Tether belt provide secure, easy anchorage and clear installation feedback.
  • Seat rotation, four tilt positions and adjustable headrest improve caregiver access and child comfort.
  • Removable, washable cover and simple plastic cleaning instructions make maintenance straightforward.
VS

Disadvantages

  • May not fit all vehicles in all adjustments—particularly when set above 135 cm, requiring vehicle compatibility checks.
  • Forward‑facing use is restricted for children under ~15 months or 76 cm, limiting early forward adoption.
  • Plastic parts can heat in sunlight, posing a burn risk if not shaded or covered.
  • After a significant impact the seat must be replaced, which can be an unexpected expense.
  • Cover is an integral part of the system and cannot be substituted with parts from other kits.
M: OA-GPT-5-NAN

Product Specification

Group

i-Size

Weight Class

0-79.37 lb

Age Class

0-12Y

Harness Technology

Five-point safety harness

Installation

forward/rearward facing

Isofix

yes, Top-Tether

Features

reclinable backrest, height-adjustable headrest, seat insert, removable/washable cover, swivel function, side impact protection

Dimensions (WxHxD)

17.72x30x18.50in

M: OA-GPT-54-NAN

Product Description

Lionelo Bastiaan i-Size Manual

The Lionelo Bastiaan i-Size is a versatile, long‑use child car seat engineered to cover children from infant sizes through booster stage. Designed and approved to UN R129 (i‑Size) standards, Bastiaan adapts from rear‑facing for small infants to forward‑facing with built‑in ISOFIX and Top Tether anchorage, then converts into a high‑back booster for older children. It emphasizes safety, adjustability and practical maintenance to suit family travel needs.

Key product features

Bastiaan supports children approximately 40–150 cm in height (up to 36 kg in some configurations) with distinct installation modes: rear‑facing (40–105 cm, up to 21 kg), forward‑facing with 5‑point harness (76–105 cm, up to 21 kg) and forward‑facing booster mode (100–150 cm). The seat includes ISOFIX arms with visual green/red indicators, a Top Tether strap with length adjuster and hook, integrated 5‑point harness and removable seat belts for booster conversion.

The seat rotates to simplify placing a child in the car, offers four tilt positions for comfort, and has a height‑adjustable headrest that automatically repositions shoulder belt guides. A removable infant reduction insert and protective cushions keep smaller children correctly positioned. Important plastic components and guides ensure correct belt routing whether using the vehicle belt or ISOFIX anchorage.

Safety and use guidance

Lionelo stresses correct installation: use only i‑Size marked seating positions, avoid forward‑facing for very small infants (under ~15 months or 76 cm), and never install rear‑facing where a front airbag is active. After any significant impact the seat should be replaced. Keep belts untwisted and properly tensioned, route Top Tether as instructed, and always follow vehicle manufacturer guidance. The manufacturer also warns that plastic parts can heat in sunlight and that the fabric cover is integral to safe operation.

Maintenance and care

The fabric cover is removable and hand washable up to 30°C; avoid tumble drying and drying in direct sunlight. Plastic parts can be cleaned with a damp cloth and mild detergent; do not use harsh chemicals or bleach. Photos are illustrative; actual appearance may vary.

Notes

  • Approved under UN Regulation R129 (i‑Size) for compatible vehicle seating positions.
  • Use the infant reduction insert for children under recommended heights (e.g., <87 cm).
  • Keep the manual accessible and contact [email protected] for questions.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly