LinkerKit Thermal Module Manual
PDF manual · 4 Pages
English
Quick check
Incorrect answer, please try again.
Chat with your LinkerKit Thermal Module manual using AI
Get instant AI answers from your LinkerKit Thermal Module manual
Ask anything about the LinkerKit Thermal Module. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Thermal Module?
Yes NoFrequently Asked Questions
It uses a thermistor whose resistance changes with ambient temperature. The system measures this resistance change to calculate the exact temperature value.
Is this answer helpful?
Yes, the design includes a 500 millivolt offset that specifically allows for accurate measurement of temperatures below zero degrees Celsius.
Is this answer helpful?
The device utilizes C++ based code compatible with the Arduino IDE environment for setup and operation.
Is this answer helpful?
The system updates approximately every second due to the one-second delay programmed into the main loop function.
Is this answer helpful?
Standard models are not inherently waterproof; protective casing is recommended for outdoor or wet environments.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High precision with 10mV per degree resolution
- Supports negative temperature measurements effectively
- Easy integration with Arduino platforms
- Real-time data output via serial monitor
- Customizable code for specific application needs
Disadvantages
- Requires manual wiring and initial setup
- Dependent on external power source stability
- No built-in display requires external interface
- Limited range without additional amplification components
Product Specification
Manufacturer
LinkSprite
Type
Thermometer (TMP36)
Platform
LinkerKit
Connection
1x Linkerkit connector
Power Supply
via Host
Product Description
LinkerKit Thermometer Manual: A Guide to Precision Temperature Monitoring
The LinkerKit Thermometer represents a sophisticated approach to ambient temperature detection, leveraging the inherent properties of thermistors to deliver accurate readings. At its core, this thermal module operates on a simple yet effective principle: the resistance of a thermistor changes predictably as the surrounding temperature fluctuates. Specifically, as the ambient temperature drops, the resistance increases, allowing the system to calculate precise environmental data through mathematical conversion.
This device is designed for seamless integration with microcontroller platforms like Arduino, making it an ideal choice for hobbyists and professionals alike who require reliable temperature tracking. The setup process involves connecting the sensor pin to an analog input, where the resolution is calibrated at 10 millivolts per degree centigrade. This calibration includes a 500 millivolt offset, a crucial feature that enables the measurement of negative temperatures without loss of accuracy.
Once powered, the system initializes a serial connection, allowing users to monitor real-time data via a computer interface. The loop function continuously reads voltage values from the sensor, converts them into meaningful temperature metrics in both Celsius and Fahrenheit, and displays them instantly. This constant stream of data ensures that users can observe temperature trends as they happen, whether for climate control, industrial monitoring, or scientific experimentation.
The versatility of the LinkerKit Thermometer extends beyond basic reading capabilities. Its ability to handle both positive and negative values makes it suitable for diverse environments, from freezers to hot workshops. The code structure provided allows for easy customization, enabling users to adjust sampling rates or add logging features to suit specific project needs.
Notes: The device relies on stable power supply for consistent readings. Calibration should be verified against known temperature sources periodically. Ensure proper insulation of the sensor to avoid external heat interference.
Search for 67,706 Manuals online
Type-in Brand or Model
