Manual.ly Logo

LEDmaxx Illu Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
229d1f76ea2a3d9d6066ce57ef16539d6a9d page 1
Illu Lichterkette Komplettset
E27 Fassungen mit Dichtung zum
verschrauben, verlängerbar, schwarz
Max. 1500 Watt
(Lichterkette oder verlängerte
Lichterkette gesamt)
String lights with E27 sockets
and turn screw sealing rings, black
Max. 1500 watts
(string lights or extended
string lights)
Ausführungen:
Illu-10-v2 Länge: 10 Meter mit 10 Fassungen
Illu-11-v2 Länge: 10 Meter mit 20 Fassungen
Illu-12-v2 Länge: 10 Meter mit 30 Fassungen
Illu-20-v2 Länge: 20 Meter mit 20 Fassungen
Illu-21-v2 Länge: 20 Meter mit 40 Fassungen
Illu-22-v2 Länge: 20 Meter mit 60 Fassungen
Illu-30-v2 Länge: 30 Meter mit 30 Fassungen
Illu-32-v2 Länge: 30 Meter mit 90 Fassungen
Illu-50-v2 Länge: 50 Meter mit 50 Fassungen
Illu-51-v2 Länge: 50 Meter mit 100 Fassungen
Illu-10-v2 length: 10 meters with 10 sockets
Illu-11-v2 length: 10 meters with 20 sockets
Illu-12-v2 length: 10 meters with 30 sockets
Illu-20-v2 length: 20 meters with 20 sockets
Illu-21-v2 length: 20 meters with 40 sockets
Illu-22-v2 length: 20 meters with 60 sockets
Illu-30-v2 length: 30 meters with 30 sockets
Illu-32-v2 length: 30 meters with 90 sockets
Illu-50-v2 length: 50 meters with 50 sockets
Illu-51-v2 length: 50 meters with 100 sockets
Lagern der Lichterkette
Fehlererkennung und – beseitigung
Das Leuchtmittel in der Fassung leuchtet nicht:
- Prüfen Sie den Zustand des Leuchtmittels in einer anderen Leuchte
Lieferumfang
Illu-Leitung Set
Ersatzdichtungen für Fassungen
Delivery
Illu string lights set
Replacement seals for sockets
Bestimmungsgemäßer Gebrauch Intended Use
Storing the string lights
-
Verpacken Sie die Illuleitung staubdicht und achten Sie darauf, dass
das Produkt vorher komplett trocken und sauber ist. Schützen Sie das
Produkt beim Lagern vor Temperaturschwankungen und Licht.
Pack the string light so that it is dust-proof and make sure that the
product is completely dry and clean. Protect
the product from tempe
Error detection and elimination
The bulb in the socket does not light up:
- Check the condition of the bulb in another lamp
07/2020
:
2
Importeur
LEDmaxx GmbH
Wiesenweg
97353 Wiesentheid
Versions:
Die Lichterkette mit E27-Fassungen (im Folgenden „Illuleitung“
genannt) ist zur dekorativen Beleuchtung konzipiert. Der Hersteller
und der Verkäufer übernehmen keine Haftung für Verletzungen oder
Schäden, die Folge eines unsachgemäßen Gebrauchs der Lichterkette
sind. Sie können Leuchtmittel mit einer E27-Fassung verwenden die
in der Summe nicht mehr als 1500 Watt Leistungsaufnahme haben.
Bei Verlängerung der Illuleitung ist darauf zu achten, dass die
Leistungs-aufnahme der Summe aller verbundenen Leitungen und
Fassungen die 1500 Watt nicht übersteigt. Die einzelne Fassung hat
einen maximalen Stromverbrauch von 25 Watt. Es empehlt sich die
Verwendung von sparsamen LED-Leuchtmitteln. Achten Sie darauf,
dass die mitgelieferten Dichtringe nicht beschädigt sind und eine
schützende Verbindung zwischen Fassung und Leuchtmittel
herstellen, so dass keine Feuchtigkeit in die Fassung eindringen kann.
Die Dichtringe müssen ausgetauscht werden, wenn diese durch
Sonneneinstrahlung bzw. witterungsbedingt porös oder brüchig
werden. Um diese zu tauschen müssen Sie den oberen Ring von der
Fassung abschrauben. Entfernen Sie den defekten Dichtring und
setzen Sie einen neuen ein. Nun kann der Ring wieder
aufgeschraubt und das Leuchtmittel eingesetzt werden.
The string lights with E27 sockets are intended as decorative Lighting.
The manufacturer or the seller cannot be made liable for injury or
damage resulting from improper use of the string lights. You can use
bulbs with E27 sockets up to a combined total not exceeding 1500
watts of power. When extending the cable, make sure that the power
consumption of the sum of all connected lines and sockets does not
exceed 1500 watts. The individual socket has a maximum power
consumption of 25 watts. It is recommended to use ecient LED
bulbs. Make sure that the supplied sealing rings are not damaged and
form a protective seal between the socket and the bulb so that no
moisture can enter the socket. The sealing rings must be replaced if
they become porous or brittle due to exposure to sunlight or the
weather. To change the sealing ring you have to unscrew the upper
ring from the socket. Remove the defective sealing ring and insert a
new one. Now the ring can be screwed on again and the lamp inserted.

Chat with your LEDmaxx Illu manual using AI

Get instant AI answers from your LEDmaxx Illu manual

Ask anything about the LEDmaxx Illu. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Illu?

Yes No

Frequently Asked Questions

A

The combined maximum power for all connected strings and sockets is 1500 watts. Do not exceed this limit when chaining multiple strings. Each individual socket supports up to 25 watts.

Is this answer helpful?

A

Yes. The cable and sockets are rated IP65, making them weather-resistant for outdoor decorative use. Note the plug and end cap are IP44, so protect connectors from direct water exposure.

Is this answer helpful?

A

Absolutely. LED bulbs are recommended because they are energy-efficient and produce less heat. Ensure each bulb does not exceed the 25 W per-socket limit and the total wattage stays under 1500 W.

Is this answer helpful?

A

Unscrew the upper ring of the socket, remove the old sealing ring, insert the new one, then screw the ring back on. Ensure the ring seats properly to keep moisture out before inserting the bulb.

Is this answer helpful?

A

Disconnect from the mains first. Wipe with a dry or slightly damp cloth (no detergents) and keep contacts dry. Store fully dry and dust-proof, protecting the product from temperature swings and sunlight to prevent seal degradation.

Is this answer helpful?

A

First check the bulb by testing it in another lamp. Ensure the bulb is fully screwed in to contact the lower connector. If the bulb is fine, inspect sockets, wiring, and sealing rings; do not use if the cable is damaged.

Is this answer helpful?

A

Dispose of packaging materials by sorting recyclables locally. Do not throw old electrical devices in household waste; take them to designated collection points or return them to the retailer for environmentally safe disposal.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Weather-resistant E27 sockets and cable (IP65) suitable for outdoor use.
  • Multiple length and socket configurations from 10–50 meters and 10–100 sockets.
  • Replaceable sealing rings maintain moisture protection and extend lifespan.
  • Supports up to 1500 W total allowing multiple strings to be chained safely when within limits.
  • Designed for energy-efficient LED bulbs, reducing power use and heat output.
VS

Disadvantages

  • Individual socket limit of 25 W restricts use of high-wattage incandescent bulbs.
  • Sealing rings can degrade from sun/weather and require periodic replacement.
  • Plug and end cap only rated IP44, less protected than sockets and cable.
  • Requires careful wattage calculation when extending strings to avoid overload.
  • Not suitable if cable or sockets are damaged; replacement/repair needed before use.
M: OA-GPT-5-NAN

Product Specification

Type

String lights

Integrated LEDs

no

Light source

no

Cable length

59.06 in

Features

for indoor use, for outdoor use, mains operated, expandable

IP rating

IP65

M: OA-GPT-54-NAN

Product Description

LEDmaxx String Lights E27 Manual

LEDmaxx String Lights E27 are robust, extendable decorative light strings designed for indoor and outdoor use. Featuring E27 screw sockets with replaceable sealing rings, these sets provide flexible illumination solutions for patios, terraces, cafes, events, and seasonal décor. Constructed with weather-resistant sockets and cable components rated IP65 (sockets and cable) and IP44 for plug and end cap, the strings balance durability with easy maintenance.

Each variant comes in different lengths and socket counts to fit varied needs: options range from 10 to 50 meters and from 10 up to 100 E27 sockets. The system supports a total maximum power of 1500 W across connected strings, with a recommended individual lamp rating of no more than 25 W per socket — making efficient LED bulbs the preferred choice for brightness, longevity, and energy savings.

Installation involves simple screw-in bulbs and hand-tightened sealing rings. The rings form a moisture barrier between the bulb and socket; replace them if they become brittle from sunlight or weathering. When extending multiple strings, ensure the combined wattage does not exceed the 1500 W limit to avoid overload. The product manual also emphasizes safe use: do not connect damaged cables, keep contacts dry during cleaning, and prevent unsupervised access by children or persons unable to operate electrical devices safely.

Maintenance is straightforward: disconnect from mains before cleaning, wipe with a dry or slightly damp cloth (avoid detergents), keep connectors dry, and store the lights clean and fully dry in a dust-proof condition. For damaged sealing rings, unscrew the upper socket ring, remove the old seal, insert a new one and rescrew the ring before reinserting the bulb. Dispose of packaging and old devices according to local electronic waste regulations.

Technical highlights include 220–240 V input voltage, 50/60 Hz frequency, H05RNH2-F cable type with 2x1.5 mm² conductors, and manufacturer guidance to only use compatible extension parts from the same series. The set typically ships with replacement sealing rings and the Illu wiring set, depending on the chosen configuration.

Notes:

  • Max combined power for chained strings: 1500 W.
  • Max per socket: 25 W; LED bulbs recommended.
  • Replace sealing rings when weathered to maintain IP protection.
  • Clean only when disconnected; keep contacts dry.
  • Dispose of electronics and packaging per local rules.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly