Manual.ly Logo

Ledlenser P7.2 Manual

5.0 · 79 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-54-NAN
page

/ 2

Loading...
0d19665a28569046fbeb94d652f993571258 page 1
LED LENSER®*
* English
* Deutsch
* Espanol
P7.2
LED LENSER®* AAA
LED LENSER®* AAA
LED LENSER®* AAA
LED LENSER®* AAA
On/Off
An/ Aus
Encendido/Apagado
Marche/Arrêt
Aan/Uit
オン/オフ
켜짐/꺼짐
开/关
Close
Schließen
Cerrar
Fermer
Sluiten
閉める
닫다
关闭
Open
Önen
Abrir
Ouvrir
Open
開ける
열다
打开
Focusable
Fokusierbar
Enfocable
Focalisable
Focuseerbaar
フォー カス
포커스
调焦
Thank you for choosing one of our products.
To become familiar with this product, please read the following instructions.
Item
LED LENSER
9407 Led Lenser P7.2
9607 Led Lenser P7.2 Blister
Version: 5.1
Battery pack:
4 x AAA/ LR03/ Micro (1.5 V DC)
Turning the flashlight ON and OFF
To turn the flashlight ON and OFF, push the button at the end of the flashlight. When using the three
step Quick Cycle Switch function, first press for maximum light, then click for high light, and again for
low.
One-Handed Speed Focus
To adjust the focusable beam to suit your application, simply push forward or pull back with your
thumb on the head of the light.
Replacing the batteries
To replace the batteries, first switch off the flashlight and then unscrew the cap at the end of the
flashlight. You must not cause a short circuit of the golden front contacts of the battery holder. Take
out the used (discharged) batteries and dispose of them properly. Insert the new batteries according
to the polarity marks (+) and (-). Close the flashlight by screwing the end cap back in place.
Important
When inserting new batteries, follow the polarity marks (+) and (-) that are marked inside the battery
housing. If inserted incorrectly, battery damage could occur and cause an explosion.
Batteries
Never try to recharge batteries or use new and used batteries together. Always change all old
batteries at the same time and only use high quality batteries that are of the same kind. Do not use
high current batteries or accumulators because of different electrical values. If you do not intend to
use the flashlight for a long period of time, take the batteries out to prevent leaking and damage to
the flashlight. Discharged batteries must be taken out. Used batteries and accumulators are
hazardous waste and must be disposed of according to government regulations.
Accessories
The enclosed lanyard can be fastened at the end of flashlight. The enclosed pouch will fit belts up to
a maximum width of 80mm.
WARNING
Do not shine the light directly in someone´s eyes. If the light beam does shine directly in your eye,
look away immediately. Do not use any magnifying instruments with this flashlight that could
concentrate the light beam. In the case of commercial use, the user of the flashlight should only use
this product in accordance with any local laws and regulations.
Wir freuen uns, dass Sie sich für ein Produkt aus unserem Hause entschieden haben.
Um sich mit Ihrem neuen Produkt vertraut zu machen, finden Sie hier eine Gebrauchsanleitung.
Artikel
LED LENSER
9407 Led Lenser P7.2
9607 Led Lenser P7.2 Blister
Version: 5.1
Batteriesatz:
4 x AAA/ LR03/ Micro (1,5 V DC)
Ein- und Ausschalten
Der Schalter befindet sich am Ende der Lampe. Beim ersten Betätigen des Schalters erhalten Sie
volles Licht, beim nächsten Betätigen des Schalters gedimmtes Licht. Ein erneutes Betätigen des
Schalters schaltet die Lampe wieder aus. Sie können den Schalter auch als Taster benutzen, wenn
Sie den Knopf nicht ganz durchdrücken. Beim Tasten erhalten Sie sofort die maximale Lichtstärke.
Fokus (One-Handed Speed Focus)
Halten Sie die Lampe am geriffelten Mittelteil mit einer Hand fest und schieben Sie mit dem Daumen
und dem Zeigefinger den Objektivtubus nach vorne oder hinten. Hierdurch können Sie den
Lichtstrahl stufenlos einstellen.
Wechsel der Batterien
Vor dem Wechseln der Batterien schalten Sie unbedingt die Lampe aus. Zum Wechseln der
Batterien schrauben Sie bitte die Lampe hinten auf. Der Batteriehalter ist mit der Endkappe
verbunden. Ziehen Sie diese Einheit heraus und entnehmen Sie die verbrauchten Batterien.
Wechseln Sie immer alle Batterien gleichzeitig. Legen Sie die neuen Batterien entsprechend der
Kennzeichnungen in den Batteriehalter ein. Achten Sie darauf, die drei goldenen Kontakte nie
kurzzuschließen. Halten Sie diese Kontakte beim Batteriewechsel von allen metallischen oder
feuchten Gegenständen fern. Schieben Sie den Batteriehalter wieder ins Lampengehäuse.
Schrauben Sie danach das Schaltergehäuse wieder ein.
Achtung!
Wenn Sie neue Batterien einlegen, beachten Sie unbedingt die Polaritätsmarkierungen (+) und (-)
im Batteriefach. Andernfalls besteht eventuell die Gefahr, dass Batterien beschädigt werden und
explodieren!
Zubehör
Die mitgelieferte Handschlaufe kann mit dem Miniatur-Schlüsselring an der Lampe befestigt werden.
Die Gürteltasche passt an Gürtel bis zu einer Breite von 80 mm (z.B. Koppel).
Batterien
Nicht wieder aufladbare Batterien dürfen keinesfalls wieder aufgeladen werden. Verwenden Sie
niemals neue und gebrauchte Batterien zusammen. Verwenden Sie ausschließlich hochwertige
Batterien desselben Typs. Wechseln Sie immer alle Batterien auf einmal. Die Verwendung von
Akkus und hochstromfähigen Batterien ist wegen anderer elektrischer Werte nicht zugelassen. Falls
Sie die Lampe längere Zeit nicht verwenden wollen, entnehmen Sie unbedingt die Batterien, um
Schäden zu vermeiden. Leere Batterien müssen entnommen werden. Verbrauchte Batterien und
Akkus sind Sondermüll und müssen gemäß der nationalen Gesetzgebung entsorgt werden.
Sicherheitshinweis
Richten Sie niemals absichtlich den Lichtstrahl in die eigenen oder in die Augen anderer Personen.
Falls ein Lichtstrahl in die Augen trifft, sind die Augen bewusst zu schließen und der Kopf aus dem
Lichtstrahl zu bewegen. Es dürfen keine optisch stark bündelnden Instrumente zur Betrachtung des
Lichtstrahls verwendet werden. Wenn jemand direkt in den Lichtstrahl blickt, kann die hohe
Leuchtkraft der Lampe zu Blenderscheinungen führen. Bei gewerblicher Nutzung oder der Nutzung
im Bereich der öffentlichen Hand ist der Benutzer entsprechend der Vorschriften für Laserstrahlung
zu unterweisen.
Gracias por elegir uno de nuestros productos.
Para familiarizarse con este artículo por favor lea las siguientes instrucciones.
Artículo
LED LENSER
9407 Led Lenser P7.2
9607 Led Lenser P7.2 Blister
Versión: 5.1
Baterías:
4 x AAA/LR03 (1.5V DC)
Encendido y apagado
Para encender y apagar la linterna, presione el.interruptor situado al final de la misma. Cuando use
la función Interruptor de ciclo rápido en tres pasos, primero presione para máxima luz, luego
presione para luz alta y presione otra vez para luz baja.
Enfoque rápido con una mano
Para ajustar el ángulo de la luz de acuerdo con sus necesidades, simplemente empuje hace
delante o atrás con su pulgar sobre el cabezal de la linterna.
Cambio de las baterías
Para cambiar las baterías primero apague la linterna y luego desenrosque la tapa situada al final de
la linterna. No debe causar un corto circuito de los contactos dorados frontales del soporte de las
baterías. Extraiga las baterías usadas (descargadas) y deshágase de ellas de forma adecuada.
Inserte las baterías nuevas de acuerdo con las marcas de polaridad (+) y (-). Cierre la linterna
enroscando la tapa final en su sitio.
Importante
Cuando se coloquen las nuevas baterías siga las marcas de polaridad (+) y (-) marcadas sobre la
carcasa de las pilas. Si se insertan de forma incorrecta las baterías podrían dañarse y causar una
explosión.
Baterías
Nunca intente recargar las baterías usadas o usar las nuevas y las gastadas juntas. Cambie
siempre todas las baterías usadas al mismo tiempo y utilice baterías de alta calidad y del mismo
tipo. No use baterías de alta corriente o baterías recargables debido a los diferentes valores
eléctricos. Si no va a usar la linterna durante un tiempo prolongado, saque las baterías para
prevenir posibles daños por sulfatación de las mismas. Las baterías descargadas deben ser
retiradas. Las baterías y acumuladores usados son desechos peligrosos y deben de ser tratados
de acuerdo con la legislación vigente.
Accesorios
El cordón que se adjunta puede ser ajustado al final de la linterna. La funda adjunta se adapta a
cinturones de un ancho máximo de 80mm.
Advertencia de Seguridad
No enfocar directamente a los ojos. Si ello sucede, gire la cabeza inmediatamente en otra dirección.
No usar ningún instrumento de aumento con esta linterna que pueda concentrar el haz de luz. En
caso de uso comercial, el usuario solo debe utilizar este producto de acuerdo con las normas
locales.

Chat with your Ledlenser P7.2 manual using AI

Get instant AI answers from your Ledlenser P7.2 manual

Ask anything about the Ledlenser P7.2. Answers come from this manual, with the pages they are based on.

P7.2 Maintenance Schedule

When not in use for a long period
Remove batteries

Take out the batteries to prevent leaking and damage if the flashlight will not be used for a long time.

When discharged
Remove discharged batteries

Discharged batteries must be removed immediately to prevent potential damage.

As needed
Clean with dry cloth

Clean the lamp and accessories only with a non-linting dry cloth.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend P7.2?

Yes No
0
User Pic

Ottilie Krug

9 months ago

Does the LED Lenser P7.2 really run long on AAA batteries, and how water resistant is it (IP4)? I want to use it daily for work and dog walks.

0
User Pic

Manual.ly

9 months ago

Customer reports are generally very positive: with the included AAA cells, many users say the light stays strong for weeks or months, and the power-saving mode noticeably extends runtime. Exact battery life depends on brightness level, how often you use the brightest setting, and temperature, so for precise planning please check the runtime values in the product manual for the specific mode and battery type. On water resistance: an IP4 rating means splash and dust resistance, not protection against heavy rain or immersion. Use it with care in wet conditions and avoid submersion.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

Its tail switch and three-step Quick Cycle Switch keep operation simple. You can turn it on quickly, cycle brightness levels, and switch it off without complex settings.

Is this answer helpful?

A

The P7.2 uses a one-handed Speed Focus design. You slide the lamp head forward or backward to widen or narrow the beam, which helps match the light to the task.

Is this answer helpful?

A

It uses four AAA / LR03 / Micro batteries at 1.5V DC. The light is designed for standard replaceable batteries rather than built-in rechargeable cells.

Is this answer helpful?

A

No. The instructions advise replacing all batteries at the same time and avoiding mixed battery sets. This helps prevent performance issues and possible damage.

Is this answer helpful?

A

Yes. It includes a lanyard for attachment and a pouch that fits belts up to 80 mm wide, making it easier to carry during work or travel.

Is this answer helpful?

A

Do not shine the beam into anyone’s eyes, and avoid using magnifying tools that could concentrate the light. If the light hits your eyes, look away immediately.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Three-step switching makes brightness control fast and intuitive.
  • One-handed Speed Focus allows easy beam adjustment on the fly.
  • Runs on common AAA batteries for convenient replacement.
  • Includes useful carry accessories like a lanyard and belt pouch.
VS

Disadvantages

  • Uses disposable AAA batteries instead of a rechargeable system.
  • Battery changes require careful polarity checking and full-cell replacement.
  • Pouch fits belts only up to 80 mm wide.
  • The bright beam can be hazardous if directed into eyes.
M: OA-GPT-54-NAN

Product Specification

Type

Flashlight

Colors

black

Light source

LED

Max. light output

320lm

Beam range

853.31 ft

Max. run time

50h

Power supply

4x AAA

Length

5.12 in

Weight

0.39 lb

M: OA-GPT-54-NAN

Product Description

Ledlenser P7.2 Flashlight: Practical Brightness in a Compact Form

The Ledlenser P7.2 flashlight is a straightforward, high-utility torch built for people who want reliable light without unnecessary complexity. Designed around everyday use, it combines a tail switch, a smooth focus system, and simple battery-powered operation to deliver a familiar but capable lighting experience. If you are looking up the Ledlenser P7.2 Flashlight Manual, the core idea is clear: this is a practical tool made to be easy to carry, easy to control, and easy to maintain.

One of the standout features is the three-step Quick Cycle Switch. A light press can bring immediate maximum output, while full clicks move through the available brightness levels and turn the lamp off. That makes the P7.2 especially handy when you need fast access to light in changing situations. The one-handed Speed Focus system adds even more convenience, letting you adjust the beam by sliding the head forward or back with your thumb. From a broad flood for close tasks to a tighter beam for distance, the flashlight adapts quickly.

Power comes from four AAA batteries, which keeps the light accessible and simple to replenish. The battery compartment is designed for replacement rather than charging, so users need to follow polarity markings carefully and swap all cells at the same time. The manual also emphasizes common-sense battery care: avoid mixing old and new cells, do not recharge non-rechargeable batteries, and remove batteries if the flashlight will sit unused for a long period.

The package also includes useful everyday accessories. A lanyard can be attached for easier handling, and the included pouch is sized for belts up to 80 mm wide. These details make the P7.2 feel ready for work, travel, or home use. At the same time, the safety guidance is important: never aim the beam directly into anyone’s eyes, and avoid optical tools that could intensify the light.

Notes

  • Uses 4 x AAA / LR03 batteries
  • Designed for one-handed beam adjustment
  • Built for practical carry with pouch and lanyard
  • Always follow battery polarity marks carefully

Overall, the Ledlenser P7.2 is best understood as a dependable, no-fuss flashlight with thoughtful controls and solid everyday versatility. It is not about flashy extras; it is about giving users quick, controlled light exactly when they need it.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly