Check the product regularly for visible damage and ensure the housing seal is intact. If damaged, switch off and remove from explosive areas immediately.
No, you must never open the product or replace batteries inside an explosive atmosphere. Always move the unit to a safe area before performing any maintenance or battery replacement.
Is this answer helpful?
A
With fully charged batteries, the lamp operates for up to 6 hours in Power mode and up to 40 hours in Low-Power mode, depending on the selected brightness setting.
Is this answer helpful?
A
No, the optional signal cone (item number 500958) is not suitable for use in explosive atmospheres containing gases belonging to group IIC.
Is this answer helpful?
A
If dust or foreign matter is found inside the housing, remove it immediately and inspect the unit for any signs of damage to ensure the seal remains intact.
Is this answer helpful?
A
No, the Ledlenser iL7R is designed for portable use only. It must not be installed permanently or left continuously in an area with an explosive atmosphere.
Is this answer helpful?
A
When connected to the charging station, the indicator light glows red during charging. Once the battery is fully charged, the light turns green to signal completion.
Is this answer helpful?
M: QW-35-FL
Advantagesand
Disadvantages
Advantages
Extends up to 40 hours of runtime in low-power mode for long shifts
Advanced rotating head allows seamless switching between flood and spot beams
Certified safe for use in explosive atmospheres with rigorous compliance standards
Includes a convenient charging tray with clear red and green status indicators
Robust build quality ensures durability in harsh industrial environments
VS
Disadvantages
Charging station cannot be used inside explosive zones requiring external setup
Optional signal cone accessory is incompatible with Group IIC gas atmospheres
Unit cannot be disassembled for maintenance, limiting user serviceability
Strict environmental limits require monitoring of temperature and pressure conditions
Magnetic fields can disrupt the switch, necessitating distance from strong magnets
M: QW-35-FL
Product
Specification
Type
Flashlight
Colors
black, yellow
Light source
3x LED
Max light output
10.8 lumens
Min light output
1.7 lumens
Beam distance
558 feet
Max runtime
40 hours
Min runtime
6 hours
Light modes
2
Power supply
1x 18650
Length
6.3 inches
Head diameter
1.6 inches
Weight
8 ounces
Features
waterproof (IPX8), rechargeable, dustproof
M: QW-35-FL
Product
Description
The Ledlenser iL7R: Safety and Power in Hazardous Environments
The Ledlenser iL7R Taschenlampe stands as a premier solution for professionals working in explosive atmospheres. This handheld flashlight is meticulously engineered to provide reliable illumination where safety is paramount. Designed with robust construction, it operates effectively within a specific temperature range of -20°C to +40°C and air pressure between 80 kPa and 110 kPa. Its primary function is to ensure visibility without compromising the integrity of hazardous zones.
Advanced Features and Operation
Equipped with an advanced focus system, users can effortlessly rotate the lamp head to switch between a wide flood beam and a concentrated spot beam. This versatility allows for both broad area lighting and precise task illumination. The device features a rotating switch that powers the unit on and off while allowing selection of the desired brightness level. For extended use, the iL7R offers impressive battery life, running up to 6 hours in high-power mode and a remarkable 40 hours in low-power mode when fully charged.
Charging and Maintenance
The product comes complete with a dedicated charging tray. To charge, simply connect the station to a power source outside the hazardous area, turn off the lamp, and insert it into the tray. A red indicator light signals active charging, turning green upon completion. Strict adherence to safety protocols is required; never recharge the unit or install the charging station inside an explosive atmosphere. Regular cleaning with a dry, lint-free cloth is essential to prevent dust accumulation, which could compromise the seal. If foreign matter enters the housing, inspect the unit immediately for damage.
Critical Safety Protocols
Safety is the core design philosophy of the Ledlenser iL7R. The lamp must remain completely sealed during operation in explosive environments. Opening the device or replacing batteries within such areas is strictly prohibited. The unit is not intended for fixed installation and must be removed from the zone if any damage is detected. Additionally, keep the flashlight away from magnets, as magnetic fields can interfere with the magnetic switch. While an optional signal cone exists, it is not suitable for gas groups IIC.
Important Notes
Register your product using the enclosed card to extend warranty coverage.
Never attempt to repair defective units intended for hazardous locations.
Do not look directly into the light source to avoid eye strain.